Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Madison Heights
Most gate failures in Madison Heights don’t call for a whole new gate. They call for the right hinge, a properly set post, or a weld that holds through the next freeze-thaw cycle. That’s what we do at Gatewood Fence & Gate. Hal Gatewood has been welding on-site and repairing gates since 2001, and our crews work the neighborhoods off John R Road and Dequindre every week. If your gate sags, scrapes, or won’t latch, call (877) 610-2993 and a live person picks up. We’ll give you an honest read on whether it’s a repair or a replacement, and we’ll stand behind the work with our 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Madison Heights’s Preferred Gate Parts & Welding Company
Madison Heights is a different animal from the purely residential suburbs around it. One call might be a 1960s chain-link swing gate on a ranch home near Huffman Park, and the next is a 40-foot sliding security gate at an auto shop off John R. We know the difference because we work this city constantly. The person who shows up at your door is background-checked, uniformed, and has Hal’s name on the invoice. Not a subcontractor, not a revolving crew. You can drive to the shop and look us in the eye if you ever want to.
We also answer the phone like a local business should. Around the clock, a live person takes the call. No voicemail maze, no chatbot. When a Madison Heights homeowner calls at 7 a.m. because their gate won’t close before work, they get a human who can actually help. That’s been the standard since 2001, and it’s why homeowners on streets like E. Harwood and Dequindre keep our number. For more on what we handle, see our Gate Parts & Welding overview page.
Madison Heights sits at an unusual intersection of dense 1950s-60s ranch-home neighborhoods and active light-industrial corridors along John R Road and Dequindre. That means a gate technician here sees aging residential chain-link swing gates in the morning and worn commercial slide gates at auto shops and storage yards in the afternoon. It’s a dual residential-plus-commercial demand profile you simply don’t find across the border in Royal Oak or Berkley. Our Madison Heights work reflects that mix every single week.
Our Gate Parts & Welding Services in Madison Heights
Hinge Replacement
On a chain-link swing gate, the hinge does the heavy lifting, and in Madison Heights, road salt and freeze-thaw cycles eat galvanized hinges alive. A typical hinge replacement in Madison Heights runs $85 to $185 per hinge, installed, depending on whether the post is still sound. We replace both hinges when one fails, because the other is never far behind. We stock common sizes for 1950s and 60s chain-link frames so we’re not waiting on a parts order.
Post Replacement
The posts in 48071 are the weak link. Most ranch homes built between roughly 1950 and 1972 got shallow footings, and 50-plus Michigan winters have heaved them out of plumb. A gate sags in the hinge post, not in the middle, and that’s where we start. Post replacement in Madison Heights typically runs $220 to $410 depending on depth, concrete, and whether we’re matching an existing fence line. Hal’s crew custom-welds a new footing and sets the post below the frost line so it stays put.
Rail Repair
Top rails on old chain-link gates bend from years of kids swinging on them and frames getting tugged. We straighten what’s salvageable and replace what isn’t. Railing repair in Madison Heights runs $90 to $220 for most residential gates. If the whole frame is compromised, we’ll tell you honestly. Fix the panel without the post and you’ll fix it twice, so we don’t patch a failing frame and call it done.
Custom Welding
This is where Hal’s 29 years in the trade shows up. We weld on-site, in your driveway, so the gate stays put. Broken hinge plates, cracked frames, custom brackets to adapt a modern opener to an older gate frame, corner tears, latch plates that tore loose. Custom welding jobs in Madison Heights run $110 to $320 for most residential work, depending on prep and material. We’d rather spend an hour with the welder than sell you a $1,800 gate that you didn’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Madison Heights
We’re certified to service nine major gate brands, and in Madison Heights we see a lot of Viking and Ghost Controls on residential openers, plus DoorKing and Elite on commercial slide gates along John R Road. We keep common hinge sizes, track rollers, and latch hardware on the truck for 48071 jobs, so we’re not burning your afternoon on a parts run. If a control board is obsolete and no longer made, we’ll tell you that plainly and show you the retrofit options before you spend a dime.
Common Gate Parts & Welding Problems We See in Madison Heights Homes
- Heaved hinge posts from frost. Ground frost in the Detroit metro regularly penetrates 24 to 36 inches, and the shallow footings common in 1950s and 60s Madison Heights builds heave posts out of plumb every spring. The gate starts dragging, the latch misses, and the hinges bind.
- Rusted-through hinges and rollers from road salt. Salt tracked off John R and Dequindre into driveways accelerates corrosion on galvanized chain-link hardware. We see hinges seized solid and slide-gate rollers collapsed from rust, often on the same service route.
- Commercial slide gates with worn track and rollers, not dead operators. Along the John R corridor, auto shops and storage yards run slide gates daily. The rollers and track wear first. Replacing a $90 roller set often outlasts a $1,200 operator swap that wasn’t actually needed.
- Obsolete control boards on 1990s automatic gates. Many Madison Heights homes have openers from the 90s with boards that manufacturers stopped making years ago. Retrofitting a modern board onto the existing frame is usually cheaper than a full replacement, and we do that regularly.
Pricing for Gate Parts & Welding in Madison Heights, MI
Here’s what you can expect to pay in Madison Heights for the most common parts and welding work. Hinge replacement runs $85 to $185 per hinge. Post replacement with a custom-welded footing runs $220 to $410. Rail repair runs $90 to $220 on most residential gates. Custom welding runs $110 to $320 depending on the job. If you’re comparing bids, we offer a free second opinion on any written estimate and no trip charge inside the county. Every price is quoted and agreed before any work starts, in writing. You’ll never get a surprise invoice at the door.
- Hinge replacement: $85 to $185 per hinge, installed
- Post replacement: $220 to $410, including welded footing
- Rail repair: $90 to $220, residential
- Custom welding: $110 to $320, residential
- Commercial slide-gate rollers and track: $180 to $480, depending on gate weight and track condition
We Also Serve Cities Near Madison Heights
We run these same parts and welding services into Royal Oak, Hazel Park, Clawson, and Ferndale, often on the same day as a Madison Heights job. If you’re a few blocks outside 48071, don’t hesitate to call. We’ll give you an honest schedule and the same 90-Day Done Right Promise.
Serving Madison Heights, MI - Our Local Coverage Area
We’re based in the Madison Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Madison Heights
Because the hinge post is where the gate’s entire weight lands, and in Madison Heights that post was likely set in a shallow footing in the 1950s or 60s. Decades of freeze-thaw cycles have heaved it out of plumb, so the gate now pulls the hinge side down. The fix is almost never a new gate. We set a new post below the frost line, weld a solid footing, and re-hang the gate with fresh hinges. Call (877) 610-2993 for an exact quote, and remember estimates are free.
Most of the time the operator is fine and the rollers and track are the failure point. Along John R Road, salt and grit eat roller bearings, and the gate starts grinding and binding. We replace the rollers and repair or reset the track before condemning an operator that still has years left. That’s the repair-first approach Hal has worked by since 2001. Call (877) 610-2993 and we’ll put eyes on it.
No, not in Michigan. Gates installed before the UL 325 safety standards still had to be retrofitted with reversing edges and photo eyes, and operating one without those protections puts you at legal risk if someone gets hurt. We retrofit safety edges and photo eyes onto older Madison Heights gates routinely. It’s a few hundred dollars of parts and labor versus a liability claim. Call (877) 610-2993 and Hal can walk you through what your gate needs.
Road salt gets kicked into the driveway, melts snow into brine, and that brine wicks into hinge barrels and latch mechanisms. Galvanized hardware corrodes from the inside out, and one spring day the hinge seizes or the latch snaps. We replace with heavier-gauge, properly sealed hardware and in 48071 we recommend an annual hinge inspection. It’s a $120 visit that prevents a $400 post repair. Call (877) 610-2993 to book one.
Yes, and we do exactly that on Madison Heights ranch homes with original chain-link gates. The old frame is usually sound while the original operator is long gone or the control board is obsolete. We custom-weld a bracket to mount a current LiftMaster opener onto the existing frame, and return the gate to service same day in most 48071 cases. It’s often $400 to $700 less than replacing the whole gate and operator. Call (877) 610-2993 for a free estimate on adapting your gate.
When a gate fails in Madison Heights, call (877) 610-2993. A live person answers, day or night. We’ll set a time that works, show up in the window we promised, quote the job in writing before any work starts, and stand behind it with the 90-Day Done Right Promise. Hal’s name is on the shop and on every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Madison Heights with on-site welding and gate repair since 2001.