Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Los Alamitos
Gate parts and welding in Los Alamitos usually comes down to metal that has spent decades in salt air. Most calls we run in the 90720 and 90721 ZIP codes are for hinge posts rusted through at the base, sagging driveway gates that won’t latch, and weld joints that finally gave way on 50-year-old iron. We fix the gate where it stands, weld on site in your driveway, and stand behind the work with our 90-Day Done Right Promise in writing. Call (877) 610-2993 and a real person answers, day or night.
Why Gatewood Fence & Gate Is Los Alamitos’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and the name is on the door and every invoice. When you call about a gate in Los Alamitos, you are not talking to a dispatcher three states away. You are talking to us, and we will tell you straight whether the hinge post needs replacement or the hinge itself just needs new bushings. That is the repair-first approach we have run for over 29 years, and it is why homeowners off Los Alamitos Boulevard and around Cerritos Avenue keep our number.
Los Alamitos customers deal with a specific kind of gate failure. The marine layer off Seal Beach sits over the city until midday, and that daily salt moisture is what kills uncoated steel. We know which hinge brackets, post anchors, and roller tracks actually hold up here. We also know the older tract homes from the 1950s and 60s were built with gate posts set directly in concrete without drainage, so the post rots from the inside out at the base. That is where we start.
Scheduling and dispatch run from our Los Angeles office, but the crew that shows up in Los Alamitos is local to the job. Every person who walks onto your driveway is background-checked and in uniform. No voicemail, no call center. You call, Hal or his crew answers.
Our Gate Parts & Welding Services in Los Alamitos
Hinge Replacement
Hinges are the first thing the coast takes. In Los Alamitos, we regularly pull hinge pins that have seized inside their barrels from salt buildup, even when the gate itself still looks fine. We replace hinges with sealed-bearing or galvanized stainless hardware sized for the gate’s weight, and we weld the new hinge straps to the post rather than bolting a band-aid over failing metal. If the hinge post has already started leaning, we address that before touching the hinge itself. Fix the post without the hinge and you will fix it twice.
Post Replacement
The hinge post is the common failure on Los Alamitos driveway gates built between 1950 and 1975. Decorative iron posts were set directly in concrete piers with no weep holes, so salt water from the marine layer seeped down the post and sat in the footing. By the time a gate sags three inches, the base of the post is usually rusted through or close to it. We cut the old post at grade, break out the footing, set a new post in a proper drainable base, and weld the original gate back on at the correct ride height. A gate sags in the hinge post, not in the middle, and that is where we start.
Rail Repair
On picket-and-rail gates, the horizontal rails are load-bearing, and the bottom rail sees the worst of it. In Los Alamitos, that bottom rail is also the first surface to catch sprinkler overspray and standing water, so rail welds here fail fast. We repair cracked rails by cutting out the rotted section and welding in new steel matched to the existing profile, then coat the repair so it does not become the next rust point. On most jobs we can match the original design closely enough that the repair disappears into the gate.
Custom Welding
Some Los Alamitos gates cannot be fixed with stock parts. Ornamental gates from the 1960s with custom scrollwork, ranch gates along Katella Avenue sized for horse trailers, or gates with non-standard post spacing need steel cut and welded to fit. That is what we do. Our Gate Parts & Welding team welds on site, using mobile rigs so the gate stays in your driveway where you can watch the work. If a section is too far gone, we fabricate a match in the shop and weld it in place, primed and painted to blend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Alamitos
We certify to work on Linear, Viking, and Ghost Controls automatic gate systems, among others. That matters in Los Alamitos because the same salt air that eats steel gate frames also gets inside operator housings, corroding control boards and limit switch contacts faster than inland. We stock common replacement parts for local jobs so we are not waiting a week on an order. If your opener is acting up, we diagnose before we swap anything, and we replace only what is actually failing.
Common Gate Parts & Welding Problems We See in Los Alamitos Homes
- Rusted hinge posts on 50-70 year old wrought-iron gates. Daily marine layer moisture from Seal Beach, just 2-3 miles west, condenses on exposed metal and rots posts at the concrete line. These are the gates on the original post-WWII tract homes and the larger custom homes in the Rossmoor pocket of 90720.
- Seized hinge pins and misaligned gate leaves. Salt corrosion inside the hinge barrel causes stiff operation, then the motor pulls harder, then the hinge strap tears away from the post. We see this progression on Los Alamitos driveway gates that have not been lubricated in years.
- Worn bottom-track rollers on ranch gates along Katella Avenue. Equestrian properties near Los Alamitos Race Course use heavy timber-and-steel swing gates sized for horse trailers, and hay debris plus sand footing grinds rollers into uneven flats. Standard residential hardware does not survive that wear pattern.
- Corroded automatic operator boards and strike plates. The marine layer reaches inland past Los Alamitos Boulevard, and unsealed electronics mounted on metal posts pull in enough moisture to corrode boards far sooner than in Anaheim or Orange, just 10-15 miles east.
Pricing for Gate Parts & Welding in Los Alamitos, CA
Here are honest numbers for the Los Alamitos market. Hinge replacement on a standard single driveway gate typically runs $180-$340, including new galvanized hinges and welding. Full hinge post replacement runs $450-$850 depending on post size and whether the concrete footing needs breaking out. Rail repair, cutting out and welding a rotted bottom or mid rail, runs $200-$400. Custom welding projects are quoted by the job, and a straightforward bracket or tab repair starts around $150. Roller replacement on ranch gates runs $120-$260 per roller set. We quote every price before any work starts, and that number does not change at the door. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Los Alamitos
Beyond Gate Parts & Welding in Los Alamitos, we run the same repair-first service and on-site welding through Rossmoor, Hawaiian Gardens, Cypress, and Seal Beach. If your gate is sagging, rusting through at the post, or failing to latch, call us before you replace it. Hal will tell you straight whether it can be welded.
Serving Los Alamitos, CA - Our Local Coverage Area
We’re based in the Los Alamitos area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Los Alamitos
Because Rossmoor sits inside the 90720 ZIP and catches the full marine layer that rolls in off Seal Beach every morning, carrying salt moisture that condenses on unpainted hinge barrels and pin surfaces. Cypress and Garden Grove sit far enough east that the layer often burns off before it reaches their gates. In Los Alamitos, the daily salt exposure pits hinge metal and seizes pins within a few years without regular lubrication.
The bottom rail weld where it meets the hinge-side stile, because that joint holds the gate’s weight and catches both salt moisture and sprinkler overspray. On Los Alamitos tract homes from the 1950s and 60s, these welds were rarely primed on the back side, so they rust from the inside out. By the time a gate rattles or drops half an inch, the weld is usually cracked through. Call (877) 610-2993 and we will tell you exactly what we find.
No, and any shop that quotes that is setting you up to pay twice. A gate sags because the hinge post is leaning or rotted at the base. Welding the panel square again without fixing the post means the same load re-bends the same weak point within a year. We replace or reinforce the post first, then set the gate back at proper ride height. The 90-Day Done Right Promise covers the whole repair, in writing.
Heavy timber-and-steel ranch gates on those parcels carry horse-trailer traffic and drag chains across sand footing, which grinds bottom-track rollers into uneven flats and throws the gate off its track. Hay debris packs into the roller housings and accelerates the wear. Standard residential rollers fail in months. We stock heavy-duty sealed-bearing rollers sized for ranch gate loads, and we have replaced them on multiple Katella corridor properties. Estimates are free at (877) 610-2993.
Yes. The marine layer deposits salt moisture on the operator housing, and if the housing is not sealed or has a worn gasket, that moisture condenses directly on the control board. In Los Alamitos we see board corrosion on five-year-old openers that would last a decade in Anaheim or Orange. We inspect the housing seals and recommend sealed enclosures or relocation to the protected side before replacing the board, so you do not buy the same repair twice.
If your gate is sagging, rusting through, or grinding on its track, call (877) 610-2993. A live person answers 24/7. You will get a straight answer, an honest price before any work starts, and Hal’s name on the invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Alamitos since 2001.