Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lockport
Gate parts and welding in Lockport is repair-first work, and that starts with understanding what is actually failing. Hinge replacement, post replacement, rail repair, and custom welding in Lockport typically runs $145-$520 for most residential repairs, with post replacement on limestone running higher. If your gate sags, drags, or will not latch, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and the person who answers that number is someone who will actually show up in Lockport.
We know Lockport’s gates, from the canal district’s 1890s wrought iron to the chain-link gates off Transit Road that have been fighting frost for thirty years. This page covers what we do, what it costs in Lockport, and why the limestone under your driveway changes the job.
Why Gatewood Fence & Gate Is Lockport’s Preferred Gate Parts & Welding Company
We do not haul your gate off to some shop in another county. Our Gate Parts & Welding crew does on-site welding so the gate stays in your driveway, and Hal Gatewood puts his name on every invoice. When a Lockport homeowner calls about a sagging iron gate or a post that has tilted over the winter, the diagnosis is the same every time: find the actual point of failure, then fix that instead of replacing everything downstream of it.
Lockport homeowners have told us about national outfits that quoted one number on the phone and a different number at the door. We do not work that way. The price is quoted and agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround. A live person answers the phone 24 hours a day, seven days a week, not a voicemail and not a call center.
Scheduling for Lockport is coordinated from our New York City office, and crews serve Lockport locally. Hal’s name is on the shop, his address is published, and his license number is there for anyone to look up. That matters when you are inviting someone onto your property to weld on a gate your kids walk past every day.
Our Gate Parts & Welding Services in Lockport
Hinge Replacement
Older Lockport gates, especially the hand-forged iron work in the neighborhoods around the Erie Canal, wear hinge pin holes into ovals after a century of use. We weld new barrel hinges onto the original rail profile without distorting the aged iron, which matters because that old iron will crack if someone rushes the weld. A typical hinge replacement in Lockport runs $145-$310 depending on the gate weight and how much of the old hardware has to be cut away.
Post Replacement
This is where Lockport is genuinely different from Amherst or Tonawanda. The Niagara Escarpment puts limestone bedrock anywhere from a few inches to two feet below the surface across much of Lockport. A standard chain-link post replacement that assumes a three-foot footing will hit rock and stop. We core drill when the limestone allows it, or set epoxy anchors and surface-mount brackets when it does not. Post replacement in Lockport typically runs $260-$520, and the bedrock is priced into the quote before we dig, not discovered after and tacked on.
Rail Repair
Snow load from lake-effect storms bows top rails on chain-link gates and racks frames on older wooden privacy gates across Lockport. We straighten, reinforce, or section-replace rails and weld corner brackets where the frame has pulled apart. Rail repair in Lockport usually runs $120-$280, and most of these jobs are done the same visit.
Custom Welding
When a gate is a century old, the part it needs does not exist on a shelf. We fabricate hinge sets, latch strikes, roller brackets, and frame sections on site, matching the existing rail profile so the repair does not look like a patch. Custom welding in Lockport starts around $110 for small brackets and runs to $450 or more for structural frame rebuilds. The quote is written before the welder fires up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lockport
We are certified to service nine major gate brands, and around Lockport we see a lot of FAAC and LiftMaster operators on newer installs, plus BFT and Linear on older sliding gates. Viking shows up on the heavier commercial and estate gates along the escarpment. We stock common parts locally for Lockport customers so a failed control board does not leave a gate stuck open for two weeks waiting on a distributor. If the operator can be saved, we save it. If the board is obsolete and replacement parts cost more than a modern operator, we will tell you that plainly and give you both numbers in writing.
Common Gate Parts & Welding Problems We See in Lockport Homes
- Leaning hinge posts that are not actually sinking. In Lockport, frost heave leverages a post off the shallow limestone shelf it was set into, and the post tilts outward. The soil looks firm, but the gate is dragging. The fix is epoxy anchors or surface-mount hardware, not more concrete in a shallow hole.
- Sagging 1920s iron swing gates. The latch misses the strike because the hinge post has moved or the hinge pin holes have worn egg-shaped. We straighten the gate and rebuild the hinge before replacing the latch, so you are not fixing the symptom twice.
- Obsolete operator control boards after snow-belt storms. Power flickers from lake-effect storms kill older pre-UL 325 boards, and suddenly the LiftMaster or FAAC keypad you have had for fifteen years cannot command the gate anymore. The board is gone. We replace it, or we tell you honestly when the operator itself is the better investment.
- Slide gates that jump the track. A worn roller or a bent rail lets a steel slide gate hop the track on every cycle. We weld a new roller bracket onto the existing gate frame and true the rail, which costs far less than replacing the gate.
Pricing for Gate Parts & Welding in Lockport, NY
A typical gate parts or welding repair in Lockport runs $145-$520. Hinge replacement lands at $145-$310, rail repair at $120-$280, custom welding from $110 for small brackets up to $450 for structural rebuilds, and post replacement at $260-$520 because of the limestone work that is routine here. The bedrock is on the quote, not a surprise after the shovel goes in. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Every price is quoted and agreed before work starts, and it does not move when you are not looking. Call (877) 610-2993 for a written estimate.
We Also Serve Cities Near Lockport
Serving Lockport and the surrounding communities is what we do every week. We run service out to South Lockport, North Tonawanda, Tonawanda, and Williamsville for the same repair-first work, with the same written pricing and the 90-Day Done Right Promise. If your gate is sagging or the post is leaning, call and we will get someone out to look at it.
Serving Lockport, NY - Our Local Coverage Area
We’re based in the Lockport area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lockport
Your post is likely sitting on or near the limestone shelf that runs under much of Lockport. Frost from lake-effect winters wedges between the post footing and the rock, and the post tilts instead of sinking. The repair is core drilling into the limestone or setting epoxy anchors and a surface-mount bracket, which is standard practice here and far less common in Buffalo or Amherst. Call (877) 610-2993 and we will tell you exactly what your post needs before we touch it.
Yes. In most Lockport cases we can. The sag is almost always in the hinge post or worn hinge pin holes, not in the iron itself. We straighten the post or weld new barrel hinges onto the original rail, bring the gate back to level, and then address the latch. Replacement is only the answer if the iron frame has cracked through. The quote is free and it is on paper before any welding starts.
Replacing the control board usually runs $180-$420 installed in Lockport, which is cheaper than a new operator for most 2005-era LiftMasters. But if the operator is pre-UL 325 and the board is obsolete, you can be chasing a second failure next season. We will give you both numbers in writing and an honest recommendation, not a sales pitch. Call (877) 610-2993.
Yes, we do this regularly in Lockport. We weld a new roller bracket directly onto the gate frame and true the rail so the gate tracks straight again. A roller replacement with welding typically runs $130-$240 here, and the gate stays in your driveway the whole time. Estimates are free.
Yes, you should. A gate that age predates modern UL 325 safety requirements, and adding photo-eyes or an edge sensor is a straightforward retrofit. It also matters for your own liability if someone gets caught in a closing gate. We can add them while we are repairing the hinge or post, and we will explain what is required and what is optional before we write the quote. Call (877) 610-2993 and we will walk through the gate with you.
Call Gatewood Fence & Gate for Gate Parts & Welding in Lockport
If you live in Lockport and your gate is sagging, dragging, or stuck open, call (877) 610-2993 now. A live person answers, and we will get you a written estimate before any work begins. Hal Gatewood’s name is on the shop and on every job, and the 90-Day Done Right Promise is on paper, not in fine print. We fix what other companies want to replace, and we do it in your driveway.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lockport since 2001.