Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lighthouse Point
Gate parts and welding in Lighthouse Point usually come down to one thing: salt. When a hinge seizes, a post snaps at the base, or a weld cracks along a canal-front swing gate, the fix has to match the environment or you’ll be calling again in two years. We stock marine-grade stainless hardware and do our welding on site in Lighthouse Point, so the gate stays in your driveway and the repair actually holds. If you need someone out today, call (877) 610-2993 and Hal or one of his crew will pick up.
Why Gatewood Fence & Gate Is Lighthouse Point’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and never turned it into a franchise. His name is on the shop and on every invoice, and the address is published so anyone in Lighthouse Point can look it up or stop by. That’s a different kind of accountability than a national outfit with a rotating cast of subcontractors. When we say the price is set before we start, we mean it, and when we stamp the 90-Day Done Right Promise on a job, it’s in writing, not fine print.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail tree or a chatbot. If your gate is stuck open on a canal-front property off NE 28th Street at 10 p.m., you talk to a human who knows Lighthouse Point, not someone reading a script three states away.
Our crew is background-checked and uniformed, and they’ve seen enough Lighthouse Point gates to know the difference between a hinge that needs grease and a pilaster that’s rusting from the inside. The 90-Day Done Right Promise means if it’s not done right, one call brings Hal back. No runaround, no second invoice.
Our Gate Parts & Welding Services in Lighthouse Point
Hinge Replacement
Hinge replacement in Lighthouse Point almost always means swapping out zinc-plated hardware for 316 stainless. Standard hinges near the finger canals seize and snap within a few seasons. We cut the old ones off, weld or bolt the new ones in place, and reset the gate so it swings level against the post. Most hinge jobs in Lighthouse Point run $180-$420 depending on gate weight and how much welding the job requires.
Post Replacement
We replace hinge posts and latch posts for swing gates and slide gates throughout Lighthouse Point. A sagging gate is usually a post problem, not a panel problem. If the post is wobbling, we dig it out, set a new galvanized post in concrete, and lag or weld the hinges back on. Post replacement in Lighthouse Point typically runs $380-$900, more if the old concrete pad needs breaking out or the post is set into a canal-side pilaster that’s already spalling.
Rail Repair
Slide gate rail repair in Lighthouse Point gets complicated by salt corrosion eating the galvanized coating. We straighten bent rail sections, weld cracked joints, and replace roller track that’s pitted beyond repair. On canal-front properties where the driveway sits only inches above the high-water line, we’ll also check the rail mounting bolts for rust. Rail repair typically costs $250-$650 depending on rail length and damage.
Custom Welding
When a gate frame crack or broken ornamental ironwork shows up, we weld it in the driveway. We don’t haul the gate off unless it’s absolutely necessary. Custom welding for Lighthouse Point gates includes reinforcing rusted frame corners, rebuilding gate leafs, and fabricating replacement brackets. Expect $150-$500 for most custom welding jobs depending on extent and material thickness.
Two other parts of our work in Lighthouse Point are Gate Parts & Welding for gate rollers and latch and lock hardware. Gate rollers on salt-exposed slide gates need replacement every few years, and latch mechanisms seize faster near the canals than anywhere else in Broward. We keep common roller sizes and stainless latch assemblies in the truck for Lighthouse Point calls.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We service and install parts for Linear, DoorKing, and Ghost Controls gate operators, along with LiftMaster, FAAC, BFT, Viking, Elite, and Mighty Mule. If you need our Gate Motor & Opener in Lighthouse Point serviced, that covers just about every operator bolted to a local gate. That covers just about every operator bolted to a Lighthouse Point gate. We keep common control boards, remotes, and safety edges in inventory, so a repair on a DoorKing swing arm or a Linear slide operator doesn’t wait a week while someone ships a part from a warehouse.
Common Gate Parts & Welding Problems We See in Lighthouse Point Homes
- Hinge posts rusting inside the pilaster: Canal-side pilasters on mid-century Lighthouse Point homes often have rebar that’s already rusting and spalling the concrete. The hinge post looks fine until it isn’t, and then the whole gate drops.
- Zinc-plated hinges seizing near the finger canals: Salt-laden humidity from the Intracoastal gets into the hinge pin and the zinc coating fails. Then the hinge rusts, binds, and the operator burns out trying to move the gate.
- Cracked welds at gate frame corners: Wrought-iron swing gates from the 1950s and 1960s still stand all over Lighthouse Point, but the original welds at the top and bottom corners crack after decades of salt exposure and daily use.
- Operators flooded by storm surge: Canal-front driveways sit low, and during a hurricane event, gate motors and control boards mounted near grade go under water. We move controls higher and use sealed enclosures where possible.
Why Salt Air Changes Everything in Lighthouse Point
Lighthouse Point sits on a narrow peninsula threaded with finger canals off the Intracoastal Waterway. Nearly every driveway gate in the city, whether it’s an older ornamental iron swing gate off NE 31st Avenue or a newer automated slide gate on a canal-front lot, sits within a few hundred yards of salt water. That is not coastal-adjacent. That is salt water on three sides of the city with a constant onshore wind carrying chloride into every hinge, weld, and operator board.
What this means in practical terms: standard zinc-plated hinges and latch hardware that might last 10 years inland in Coconut Creek fail in three to five years in Lighthouse Point. A galvanized gate frame that would look fine in Deerfield Beach starts showing rust blooms at the welds and along the bottom rail within a couple of seasons here. The baseline for anything we install, a hinge, a post, a bracket, or a welded repair, is marine-grade 316 stainless fasteners and a galvanized or properly primed steel frame. Not an upgrade. The starting point.
On a canal-front home off NE 28th Street, our crew replaced the rusted hinge posts on a mid-century ornamental swing gate after the original rebar had spalled the concrete pilasters. We rebuilt the pilaster footings, fitted a new LiftMaster gate operator with a loop detector, and used 316 stainless hinges and latch hardware so the salt air wouldn’t eat through it again inside a decade. That kind of complete Gate Installation - Lighthouse Point homeowners can rely on is exactly what most gate repairs look like once you pull everything apart. That job is exactly what most Lighthouse Point gate repairs look like once you pull everything apart and see what the salt has been doing for 50 years.
Pricing for Gate Parts & Welding in Lighthouse Point, FL
Hinge replacement in Lighthouse Point runs $180-$420. Post replacement runs $380-$900 depending on whether we’re reusing the existing concrete pad or digging out a failed pilaster. Rail repair runs $250-$650. Custom welding runs $150-$500. Full gate frame rebuilds with new posts and hardware on a canal-front Lighthouse Point home usually land between $900 and $2,400, and we quote the entire number before we start.
We don’t charge a trip fee inside the county, we take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. If you have a written estimate from another company, we’ll give you a free second opinion. The price we quote is the price on the invoice. Call (877) 610-2993 and we’ll come out to Lighthouse Point, look at the gate, and hand you a number in writing.
We Also Serve Cities Near Lighthouse Point
Our gate parts and welding work covers Lighthouse Point and the surrounding communities. We regularly work in Pompano Beach Highlands, Deerfield Beach, Pompano Beach, and Coconut Creek. When you call Lighthouse Point or any of these nearby areas, you get the same live person on the phone and the same 90-Day Done Right Promise on every job.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lighthouse Point
The hinge fails because the original hardware was zinc-plated steel, and Lighthouse Point’s canal-side salt air eats through that plating within a few years. What looks like a healthy gate panel hiding a seized hinge is usually a hinge pin that has rusted inside the barrel. The fix is to cut off the old hardware and install 316 stainless hinges, which are standard for our Lighthouse Point calls. If your gate is sagging or squealing, call (877) 610-2993 and we can look at it the same day.
Not if the control board and motor sit near grade, which is where most original installs put them. Canal-front driveways in Lighthouse Point sit only inches above the Intracoastal’s high-water line, and surge water floods operators mounted at the base of the gate. Survivable installs raise the control board above the expected surge line and use sealed enclosures. If your operator got wet, call (877) 610-2993 and we can assess whether the board can be saved or needs replacement.
Galvanized steel frames with 316 stainless fasteners are the baseline that holds up in Lighthouse Point’s hyper-saline microclimate. Raw steel rusts fast, and painted mild steel rusts from the inside at every weld. Powder coating over a properly galvanized frame buys additional years. If you’re repairing an older wrought-iron gate and want the work to last, we quote galvanized replacement sections and stainless hardware as standard for every canal-side job.
Because on mid-century Lighthouse Point homes, the rebar inside the pilaster has been rusting for decades, and the concrete is spalling from the inside. You can bolt a new hinge onto a crumbling pilaster and the gate will sag again within a year. We rebuild the pilaster footing and re-set the post, then hang the new hinge. That’s the only way the repair holds long-term, which is exactly what our 90-Day Done Right Promise requires.
A keypad is not enough. For proper Gate Access Control in Lighthouse Point, a loop detector buried in the driveway senses a vehicle waiting at the gate and prevents it from closing on the car. Without one, a slide gate closes on whatever is in the path, and on canal-front Lighthouse Point driveways with tight turn-in angles, that’s a real risk. We install loop detectors as part of slide gate automation and recommend them on every automated gate in Lighthouse Point. Call (877) 610-2993 for an exact quote, estimates are free.
What Fails First on a Lighthouse Point Gate
Here’s the sequence we see on nearly every older Lighthouse Point gate: the hinges go first, then the latch, then the post, then the operator burns out trying to move a gate that’s already binding. Fix the hinge early and the rest of the system lasts. Ignore it and you’re looking at a pilaster rebuild instead of a hinge replacement. That’s the difference between a $200 repair and an $1,100 repair.
We’ve been doing this work since 2001, and we have not met a salty gate yet that couldn’t be fixed. But the fix has to respect the environment. That’s what we do for Gate Parts & Welding in Lighthouse Point, and that’s why the 90-Day Done Right Promise is in writing on every job.
Call Gatewood Fence & Gate for Lighthouse Point Gate Parts & Welding
If your gate is sagging, seized, cracked, or just not closing square, call (877) 610-2993. A live person answers, day or night. We’ll schedule a time to come out to Lighthouse Point, look at the gate, quote a written price before any work starts, and stand behind the repair with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop. That’s the promise behind every hinge, post, and weld we touch.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lighthouse Point since 2001.