Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Larchmont
Gate parts and welding in Larchmont usually mean one of two things: a hinge that finally gave out after decades of salt air, or a weld that cracked on an original iron gate. Most jobs we handle here run between $240 and $680, and we can often get to you the same day you call. If you’re off Palmer Avenue, down by Larchmont Manor, or up near the train station, you’re ten to fifteen minutes from a truck that carries the right steel and the right fixings for coastal conditions. Call (877) 610-2993 and you’ll talk to a person, not a recording.
This page explains what actually fails on Larchmont gates, what it costs to fix, and why the salt air off Long Island Sound changes the parts and welding specs you need. The point is simple: if a contractor treats your seaside gate like an inland one, you’ll be calling someone again in three years.
Why Gatewood Fence & Gate Is Larchmont’s Preferred Gate Parts & Welding Company
We’ve been fixing gates since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That matters in a village like Larchmont, where people check references at the hardware store and expect to see the same face twice. Our Gate Parts & Welding crew works on period iron gates in the Manor, modern steel driveway gates up by Murray Avenue, and everything between. We don’t haul your gate to a shop. The welding happens in your driveway, on your post, at your hinge, while the gate stays hung where it belongs.
We carry stainless steel and hot-dipped galvanized hardware as standard inventory for Larchmont jobs, because we know what the Sound does to plain powder-coated steel. Every job carries the 90-Day Done Right Promise in writing. One call brings Hal back, no runaround. That promise is why homeowners in 10538 keep our number.
Our Gate Parts & Welding Services in Larchmont
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Larchmont’s salt air eats hinge pins faster than almost any other component, because the pin sits in constant contact with the bearing surface where moisture collects. We replace standard steel pins with stainless or hot-dipped galvanized pins on every coastal job, and we ream the hinge barrel so the new pin seats clean instead of grinding against rust scale. On a typical Larchmont driveway gate, hinge replacement runs $180 to $340 per hinge, including the post mounting inspection.
Post Replacement
Fix the panel without the post and you’ll fix it twice. That’s especially true in Larchmont Manor, where original stone pillars hold wrought-iron gate frames that have been rusting for eighty or ninety years. We cut out the corroded section, weld in a new galvanized steel footing, and repoint the stone or brick around it so the repair doesn’t look like an afterthought. Post replacement in Larchmont typically runs $400 to $900 depending on whether the pillar needs resetting.
Rail Repair
Coastal freeze-thaw cycles stress the welded joints on gate rails, and the failure usually shows up as a hairline crack at the corner of a frame. We weld those cracks in place, grind the bead smooth, and repaint with a marine-grade primer before the finish coat. If the rail is too far gone, we cut and replace the section rather than layering weld on top of rot. Rail repairs in Larchmont generally run $150 to $450 per rail.
Custom Welding
Larchmont has a preservation sensibility. Homeowners will insist on welding repairs and period-matching ironwork to preserve original 80-to-100-year-old gates rather than accepting a modern aluminum substitute. We weld new sections to match old scrollwork, repair snapped finials, and fabricate matching pickets when one is missing. Custom welding rates in Larchmont run $95 to $140 per hour plus materials, and we quote the full price before any work starts. No invoice bigger than the quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Larchmont
We’re certified to service FAAC, BFT, Linear, and Viking gate operators, along with the rest of the major brands you’ll find on Larchmont properties. If your FAAC hydraulic arm is seizing up near the water or your BFT control board is throwing intermittent faults from marine moisture, we carry the parts to fix it rather than telling you to replace the whole operator. We stock bearings, hinges, rollers, and latch hardware specifically selected for coastal exposure, so the turnaround on Larchmont jobs is measured in days, not weeks.
Common Gate Parts & Welding Problems We See in Larchmont Homes
- Salt-eaten hinge pins and latch mechanisms. The pin seizes and the gate starts chattering against the latch. On swing gates within a half mile of the Sound, we see this failure within three to five years of a standard steel pin being installed.
- Stress cracks at welded joints on original iron gates. Decades of coastal freeze-thaw cycles, combined with salt penetration into old weld beads, produce cracks at the frame corners. Wrought iron from the 1920s and 1930s is especially prone.
- Corroded operator boards on slide gates. Marine moisture works its way into the control housing and corrodes limit switches and board contacts. The gate operates fine for ten minutes, then stops mid-cycle. Inland contractors often misdiagnose this as a motor failure.
- Rusted post footings with a sagging gate. The visible symptom is a gate that drags on the latch side. The actual problem is a post that has rotted below the soil line. On historic stone pillars, the iron sleeve inside the masonry corrodes and expands, cracking the stone from within.
Pricing for Gate Parts & Welding in Larchmont, NY
Here are the ranges we quote for Larchmont work, in plain numbers.
- Hinge replacement: $180-$340 per hinge
- Post replacement or footing repair: $400-$900
- Rail welding or section replacement: $150-$450 per rail
- Custom welding: $95-$140 per hour plus materials
- Latch and lock replacement: $120-$280
- Gate roller replacement: $160-$320 per roller assembly
What moves the price is the condition of the post, the thickness of the steel we’re welding to, and whether the gate has to come off its hinges. The price is quoted and agreed before any work starts. You get a written number, and that number doesn’t change at the door. We also take $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll give you a real number.
We Also Serve Cities Near Larchmont
We work regularly in Mamaroneck, New Rochelle, Wykagyl, and Eastchester, and much of what we stock for Larchmont’s salt exposure applies to those coastal and near-coastal neighborhoods as well. If you’re a few minutes up the Post Road or over in Mamaroneck, the same crew and the same parts availability apply. You can learn more about our coverage and approach on our Larchmont page.
Serving Larchmont, NY - Our Local Coverage Area
We’re based in the Larchmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Larchmont
Larchmont’s direct shoreline exposure puts salt-laden air directly against gate hardware year-round, while Mamaroneck and New Rochelle properties further from the Sound or behind wind breaks get measurably less airborne salt. But the bigger factor is housing stock: most Larchmont gates are decades-old wrought iron with original steel hinge pins that were never rated for marine exposure. We replace those pins with stainless or hot-dipped galvanized steel, which survives the Sound’s air for fifteen to twenty years instead of three to five.
Yes, in most cases. We weld cast iron with nickel-based rods, which handle the thermal expansion and brittleness that standard mild steel rods cannot. The gate stays on the pillar while we work, and we protect the surrounding stone with heat shielding. Some cast iron is too crystalline and friable to weld reliably. We’ll tell you honestly if restoration isn’t feasible before we take your money. Call (877) 610-2993 and we’ll assess it on site.
The fix starts at the footing, not the hinge. A gate sags because the post has moved or rotted below grade. We cut out the corroded steel, weld in a new galvanized footing with a stainless anchor plate, and reset the post plumb before re-hanging the gate. Then we install stainless hinge pins so the repair doesn’t fail from the inside out. The cost in Larchmont typically runs $500 to $900 for the full post-and-hinge job.
Salt air corrodes the exposed contacts on limit switches, and marine moisture condenses on control boards nightly, causing intermittent operation and false fault codes. On slide gates within a quarter mile of the Sound, we see operator board failures two to three times more often than inland. We replace boards with conformal-coated units and seal the housing properly, which extends life significantly. Most board replacements in Larchmont run $300 to $650 including programming and setup.
Yes. Standard powder-coated steel hardware, which works fine in Scarsdale or White Plains, will rust through in Larchmont within four to six years. We specify hot-dipped galvanized or stainless steel for all coastal repairs, and we use a marine-grade zinc primer before any finish coat. This is the difference between paying once and paying twice. For the specifics on your gate, call (877) 610-2993 for a free estimate.
What Larchmont’s Salt Air Means for Your Gate
Larchmont is a narrow coastal village, and the Sound is rarely more than half a mile from any front door. That changes everything about gate hardware. On a stone-pillared swing gate in Larchmont Manor, our tech found the original wrought-iron hinge post had rusted through at the base, causing the gate to sag. We cut out the corroded section, welded in a new galvanized steel post footing, and reinstalled the period-style hinge with stainless fixings, then adjusted the gate operator’s safety photocell to clear the new swing path. That is the standard Larchmont repair, and it is exactly what an inland contractor using off-the-shelf steel would not have done.
The village’s predominant housing stock, built between the 1890s and the 1940s, features formal gated entrances with original ironwork mounted on stone or brick pillars. Homeowners in the Manor and along the waterfront streets insist on period-matched welding and restoration rather than modern aluminum replacements. That expectation shapes every quote we give here. A few miles inland, standard hardware suffices. On the Sound side, it fails early, and a technician unfamiliar with the village’s preservation sensibility will clash with the homeowner quickly.
What Actually Survives on the Coast
On hinge pins: stainless or hot-dipped galvanized, never plain steel. On post footings: galvanized steel with stainless anchor bolts. On welds: nickel-based rod for cast iron, mild steel with marine primer for wrought iron. On operator boards: conformal-coated boards in properly sealed enclosures. These are not upgrades. In Larchmont, they are the minimum specification for a repair that outlasts the next nor’easter.
We’ve been at this since 2001, and Hal Gatewood’s name is on the shop, the invoice, and the work. If you’re in Larchmont and your gate is sagging, seized, or showing cracks at the welds, call (877) 610-2993. You’ll get a live person, a straight answer, and a written price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Larchmont since 2001.