Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lanham
Gate parts and welding in Lanham usually means one of three things: a hinge post that’s heaved out of plumb, a seized operator that won’t respond, or rusted iron that’s too far gone for a bolt-on fix. We handle all three, and we do the welding right in your driveway or HOA common area in Lanham, Maryland. No hauling the gate to a shop forty minutes away. No telling you to replace a $3,200 ornamental iron gate because a hinge pin froze up. Hal Gatewood and his crew live with the same clay soil, the same freeze-thaw cycles, and the same aging 1980s-era operators you do. Call (877) 610-2993 and you’ll get a live person, any hour, who can actually talk through what’s happening with your gate before we ever roll a truck to 20703 or 20706.
Why Gatewood Fence & Gate Is Lanham’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That’s the accountability people in Lanham tell us they’ve been missing from the national outfits that quote one price on the phone and present another at the driveway. We publish our address. Our license number is verifiable. And when we say a live person answers 24/7, we mean a person answers, not a voicemail, not a dispatch queue, not a chatbot.
Lanham’s neighborhoods, especially the HOA townhome clusters off Annapolis Road and Lanham Severn Road, have a particular kind of gate problem. These were built with ornamental iron swing gates and electromechanical operators that manufacturers stopped supporting years ago. That means custom fabrication and on-site welding, not a parts catalog. Our Gate Parts & Welding team carries steel stock, hinge blanks, roller assemblies, and welding rigs on the truck, because we know what Lanham’s older communities actually need.
We also stand behind the work with the 90-Day Done Right Promise, written on every job. If something’s not right, one call brings Hal back. No fine print. No runaround. That’s why HOA managers from Lanham’s gated communities keep our number in their maintenance binders.
Our Gate Parts & Welding Services in Lanham
Hinge Replacement
In Lanham, a swing gate sags in the hinge post, not the middle of the panel. The Piedmont clay under 20706 expands and contracts every winter, and over three or four decades it pushes posts out of plumb. We cut out the old hinges, weld new barrel hinges or adjustable weld-on hinges in place, and shim the leaf back to level. If the post itself has moved, tightening a hinge will not fix it. We do the post work too, which is the only way the repair lasts beyond the next hard freeze.
Post Replacement
Post replacement in Lanham is not a simple dig-and-drop. The freeze-thaw cycle here heaves gate posts, and if the new post doesn’t go below the frost line, you’ll be back in the same spot next spring. We saw this exact failure on a townhome community off Annapolis Road. The hinge post had heaved out of plumb and the gate dragged on the sidewalk. We cut out the old post, poured a new footing below the frost line, welded on fresh hinges, and had the gate swinging true while keeping the adjacent parking lane open for residents. That’s how you do post work in Lanham when you can’t close the entry for two days.
Rail Repair
Ornamental iron gates built in Lanham’s 1980s and 1990s construction wave often skipped hot-dip galvanizing before powder-coat. Thirty years of summer humidity above 70% creates rust pitting on the rails, and that’s where welds fail. A surface repair will not hold. We grind back the rust, weld reinforcing gussets or replacement rail sections, and treat the affected area so the repair is not just a temporary patch. Fix the rail without treating the post and you’ll fix it twice.
Custom Welding
When a manufacturer no longer makes the hinge, the roller bracket, or the latch plate, someone has to fabricate it. That’s Hal’s favorite work. We build custom steel and aluminum parts on site for Lanham gates, from offset hinge plates to extended drop rods to weld-on repair saddles for rusted rail sections. No ordering a discontinued part from a warehouse that might ship in three weeks. We measure, cut, weld, and paint, and the gate stays in your driveway the whole time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lanham
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. That covers a lot of what we see in Lanham, especially the Linear operators still running on older HOA entries. Because we stock common Linear and FAAC parts, we’re often able to get a Lanham gate running the same day the board fails, rather than waiting on a backordered part. The honesty part matters too: if an operator can be repaired for $140 instead of replaced for $900, we’ll say so. That’s the repair-first philosophy, and it’s why Hal gets called back year after year.
Common Gate Parts & Welding Problems We See in Lanham Homes
- Hinge post heave from clay freeze-thaw. Lanham’s heavy Piedmont clay soil expands when saturated and contracts in freezing temperatures. After thirty-plus winters, gate posts tilt, swing gates drag, and latches stop lining up. The fix is a new post footing below the frost line, not another turn on the hinge bolt.
- Dead operator that’s actually a tripped breaker. Many of the older gated entries along Annapolis Road and Lanham Severn Road run Apollo or Linear operators on 110V circuits shared with common-area lighting. When the gate goes dead, the breaker in the community mailbox kiosk is often the real culprit. A local technician learns to check there first before condemning the opener.
- Rust pitting weakening weld points. Gates built in the 1980s and 1990s in Lanham often skipped hot-dip galvanizing. Decades of summer humidity above 70% pits the iron, and those pits are where rail and hinge welds crack. If we don’t treat the rust before welding, the repair will not hold through the next humid season.
- Seized rollers on tight driveways. Lanham’s townhome clusters have restricted working space and narrow side drives, which is why many entries use slide gates instead of swing gates. When a roller bearing seizes on a 400-pound gate, the whole thing jams. We replace rollers and guide wheels on site, without hauling the gate off its track.
Pricing for Gate Parts & Welding in Lanham, MD
Here are honest numbers for Lanham’s market. Hinge replacement typically runs $180-$340 depending on whether it’s a single hinge or a full set, and whether we’re welding new plates or reusing the existing ones. Post replacement runs $400-$850 per post, based on depth, footing size, and whether we’re cutting out concrete. Rail repair with welding usually lands between $150-$350. Custom welding work is quoted by the piece, but simple brackets and plates generally fall between $75-$200. You’ll always have a written price before any work starts, and that price is the price. No surprises when the invoice arrives. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Lanham
Our crews serve Lanham and the surrounding Prince George’s communities daily. You’ll find us in Glenarden, Summerfield, Walker Mill, and Coral Hills. If you’re in Lanham or any of these nearby neighborhoods, the same crew, the same live phone answer, and the same written promise apply.
Serving Lanham, MD - Our Local Coverage Area
We’re based in the Lanham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lanham
Because the problem is almost never the hinges. The hinge post has heaved out of plumb from Lanham’s clay soil expanding and contracting through freeze-thaw cycles. Tightening the hinge on a tilted post just moves the sag somewhere else. We cut out and reset the post below the frost line, weld on new hinges, and that sag is gone for good. Call (877) 610-2993 and we’ll come take a look; estimates are free.
Yes, and we often find the operator itself is fine; the shared 110V breaker tripped and killed power to both circuits. Before we condemn a board or a motor, we check the breaker panel in the community mailbox kiosk, because Lanham’s 1980s-1990s entry gates frequently ran this wiring setup. If the breaker clears and the gate runs, you saved a service call. If there’s a deeper electrical issue, we fix that too. Call (877) 610-2993 for an exact diagnosis.
Yes. We lift the gate slightly with a jack, swap the seized roller or guide wheel, and set it back on the track. Most roller replacements in Lanham take under two hours, and we do them on site with the gate still in place. If the track is worn along with the roller, we’ll tell you before the work starts and give you a written price. Call (877) 610-2993 for a free estimate.
We grind the rust pitting back to clean steel, weld the repair, and treat the affected area with a rust-inhibiting primer and matched topcoat. The goal is a structural repair that blends without forcing you to repaint the entire gate. If the rust is widespread, we’ll be honest about what needs treatment now versus what can wait. Call (877) 610-2993 and Hal will give you a straight answer.
Yes. We cut the loop into the driveway, install the detector, and wire it into your existing operator, including most Linear, FAAC, and BFT boards still running in Lanham. This is a common upgrade for HOA entries where the keypad is a bottleneck during rush hours. We’ll give you a written price before any cutting starts. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Lanham
If your gate is dragging, rusting through, or flat-out dead, call (877) 610-2993. A live person answers, day or night, and Hal will tell you straight what it’s likely to cost and when we can be there. We serve all of Lanham, including the communities along Annapolis Road, Lanham Severn Road, and the US-50 corridor in 20703 and 20706. Free estimates. Written pricing before any work begins. The 90-Day Done Right Promise on every job. That’s how we’ve done it since 2001, and that’s not changing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lanham and surrounding Prince George’s County communities.