Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lanham-Seabrook
Gate post heaving out of plumb after a Lanham-Seabrook winter? Hinge weld cracked on a 1960s ornamental iron gate? That’s what we handle every week. Gatewood Fence & Gate does on-site welding and parts repair across the 20706 zip, keeping driveways and shared rights of way working without tearing out gates that can be fixed. Call (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is Lanham-Seabrook’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and the shop’s name is on every invoice. Homeowners along Annapolis Road and in the Seabrook neighborhoods call us because we weld on site, in the driveway, rather than hauling the gate away. If a hinge post has shifted and a weld has cracked, we fix the post and reweld the hinge. Most national outfits would hand you a quote for a full replacement instead.
Our Gate Parts & Welding crew knows the homes here. Ranch houses, split-levels, colonials from the 1950s through the 1980s, many still running the original ornamental iron or chain-link gates installed when the house was new. Those gates are 40 to 60 years old now. We show up, we measure what’s actually failing, and we quote a price before any work starts. The price is the price.
Every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround, no phone tree. That’s why people around Lanham-Seabrook keep our number in their phone after the first call.
Our Gate Parts & Welding Services in Lanham-Seabrook
We carry the parts, the welder, and the experience to fix what’s broken without replacing what isn’t. Here’s the work we do most often for Lanham-Seabrook homes.
Hinge Replacement
When an ornamental iron gate starts to sag, the panel often looks fine. The failure is normally at the hinge weld or the hinge post itself. In Prince George’s County clay, a post that heaves out of plumb puts the full weight of the gate on one hinge. We cut out the old weld, fabricate or source the correct hinge barrel, and reweld it with the gate hanging square again. You get the original gate back, not a new one.
Post Replacement
This is the repair we do most in the 20706 zip. Heavy clay soil swells and shrinks with every freeze-thaw cycle, and that movement pushes gate posts sideways and up. A post that’s leaned six inches means the gate won’t latch, the rollers bind, and the operator strains until something fails. We weld in a new steel post with a deeper concrete collar, plumbed and braced, so the gate actually works through the next winter.
Rail Repair
Bottom rails on chain-link gates corrode first, especially here where humid summers meet old galvanized stock. We cut out the rotten section, splice in new rail, and reweld the run from scratch when needed. For ornamental iron, the top and mid rails often crack at the welded joints where years of sagging concentrated stress. We repair the rail and the cause, not just the crack.
Custom Welding
Sometimes the fix is a modified bracket. Sometimes it’s a new gate frame built to an odd opening on a shared driveway off Annapolis Road. Hal welds it on site, sized to the post spacing as it actually stands, not as the original blueprints said it should be. That level of custom work keeps a gate running for another 20 years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lanham-Seabrook
We service operators and gate hardware from FAAC, BFT, Linear, and Viking, among others. If your swing gate has a FAAC operator that’s now fighting a heaving post, we don’t just replace the arm. We correct the post alignment, realign the rack or linkage, and restore the operator to its proper travel. We keep common hardware on the truck, so most Lanham-Seabrook jobs get done in one trip.
Common Gate Parts & Welding Problems We See in Lanham-Seabrook Homes
- Hinge post heave from clay soil. Every winter, Prince George’s County’s expansive clay shifts gate posts sideways. The gate then sags, the latch misses the strike plate, and the hinges carry a load they were never designed for. Fix the post first, then the hardware.
- Weld seams failing on 1950s-80s ornamental iron. Humid summers rust the original welds at hinge and rail joints. The gate’s own weight finishes the job. We grind back to clean steel and reweld.
- Slide gates on shared driveways off Route 450. When a rack and pinion tooth shears on a narrow shared driveway, both homes lose vehicle access at once. We repair the rack teeth and realign the track so the gate doesn’t jam again.
- County permit pressure. Prince George’s County requires a permit for new gate installations over 6 feet. A repair that restores the existing gate avoids triggering the permit process entirely, and we know exactly how to keep the work on the repair side of that line.
Pricing for Gate Parts & Welding in Lanham-Seabrook, MD
A hinge replacement on an ornamental iron gate in Lanham-Seabrook typically runs $250-$450 including welded fabrication. Post replacement with a new steel post and concrete collar ranges $600-$1,200 depending on post type and how deep we have to dig into the clay. Rail repair runs $180-$380. Custom welding work runs $95-$150 per hour, and we quote the full job up front, not an estimate that drifts. Every repair over $200 takes $40 off. Seniors and veterans get 10% off, permanently. No trip charge inside the county. You’ll have a written price before any work begins.
For exact numbers on your gate, call (877) 610-2993. Estimates are free.
We Also Serve Cities Near Lanham-Seabrook
If you’re in Goddard, New Carrollton, Seabrook, or Landover, you’re close enough that we see your gate the same way. Our Gate Parts & Welding in Lanham-Seabrook crews cover those nearby communities with the same on-site welding and the same written pricing. One call gets Hal out to look.
Serving Lanham-Seabrook, MD - Our Local Coverage Area
We’re based in the Lanham-Seabrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lanham-Seabrook
Yes, and that’s the usual fix we do for Lanham-Seabrook homes. We cut the old post, leave the existing concrete slab in place, and weld in a new steel post with an extended concrete collar that reaches deeper into undisturbed clay. The new post goes in plumb and stays. Call (877) 610-2993 for a free look.
Usually the rack and pinion teeth take the damage when a slide gate jumps its track. The track guide rollers may also have worn flat on one side. We identify the broken parts, replace or reweld them, and realign the track to account for the ground movement. We don’t sell you a new gate to fix a sheared rack tooth. Call (877) 610-2993 and we’ll quote it.
You can keep the gate. We grind back the fractured weld, align the hinge barrel, and reweld it with the gate supported at the correct height. The old ornamental iron is usually fine once the hinge is done properly. Most of the 1960s gates we see in Lanham-Seabrook still have decades left in them after a good weld repair. Call (877) 610-2993 to schedule a look.
It can be either, and in Lanham-Seabrook it’s often both. Clay heave tilts the post that holds the photocell, so the beam no longer aligns. Humid summers corrode the low-voltage wiring connections at the operator. We check the beam alignment, test the circuit, and repair the actual cause. Sometimes it’s a five-minute adjustment, sometimes it’s new wire. You’ll know before we start.
Yes. We stage the work so the gate stays operational for pedestrians and vehicles through most of the repair. The old post comes out, the new one goes in, and we keep interruptions measured in hours, not days. On shared rights of way along Route 450, we’ve done this enough times that the neighbors usually don’t know we were there until the gate works again. Call (877) 610-2993 and we’ll walk you through it.
Gate trouble in Lanham-Seabrook? Call (877) 610-2993. A live person answers, and Hal will come look at the gate himself. We quote the price before any work starts, no trip charge inside the county, and the 90-Day Done Right Promise is yours in writing. You can even drive to the shop and look him in the eye. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates since 2001.