Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lakeland
Gate installation in Lakeland and welding usually means one of three things: a sagging hinge post, a failed underground operator, or a cracked weld on ornamental iron. Most jobs run $180-$650 for parts and labor, and we fix the gate in your driveway rather than hauling it off. If you live off Chambers Chapel Road, Canada Road, or anywhere in the 38014 zip code, call (877) 610-2993 and Hal or one of his crew will answer.
We’ve worked Lakeland gates long enough to know what the clay soil does to a post footing and which operator models from the 2005-2012 build-out are about to fail next. That local knowledge changes what parts we stock and how fast we can have your gate swinging right again.
Why Gatewood Fence & Gate Is Lakeland’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door. We’re not a franchise and we don’t run a call center. When you call about a gate off Sedgefield Drive or a broken latch near Lakeland Elementary, the person who answers knows what a Lakeland gate looks like and what usually breaks first.
Our reputation in Lakeland comes from showing up when we say we will and welding things back together instead of selling you a new gate you don’t need. The Gate Parts & Welding team carries same-era parts for the underground hydraulic swing operators that show up constantly in Lakeland’s 2005-2012 neighborhoods. That means fewer callbacks and fewer days waiting on a part to ship.
Scheduling is coordinated from our Memphis office, but crews serve Lakeland locally. We know the drive times, the HOA expectations, and the difference between a gate on a half-acre lot and one guarding a five-acre estate on the north side of town, plus what gate access control - Lakeland properties typically require. Every job carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings us back.
Our Gate Parts & Welding Services in Lakeland
Hinge Replacement
Most Lakeland gate sag starts at the hinge post, not in the middle of the leaf. We see it constantly: expansive clay heaves the post a quarter inch out of plumb, the hinge binds, and the gate starts dragging. We replace worn hinge barrels, weld reinforced hinge plates to the frame, and set the post right before we hang the gate back. A hinge replacement in Lakeland typically runs $180-$420 depending on the gate weight and post condition.
Post Replacement
When a gate post has heaved enough that the gate won’t close without lifting, adjusting hardware won’t fix it. We cut out the old post, pour deep concrete piers below the clay movement line, and set the new post plumb with the gate dry-fitted before the concrete cures. Lakeland’s soil shrinks and swells more than most homeowners expect; a shallow footing is a repeat call. Post replacement here runs $450-$1,200 depending on post size, gate weight, and whether we’re matching ornamental iron or aluminum.
Rail Repair
Long driveway gates on Lakeland’s larger lots put serious stress on the top and bottom rails. When a rail bends or a welded joint cracks, the whole gate flexes and the operator strains against it. We straighten rails in place where possible or cut and weld new rail sections to match the existing profile. Rail repair runs $200-$600 for most ornamental iron gates in Lakeland.
Custom Welding
Lakeland has a lot of custom and semi-custom homes, and the gates often have custom scrollwork, finials, or matched panels that a generic shop won’t touch. We weld on site so your gate never leaves your driveway. Reinforcing a cracked scroll, patching a rusted-through bottom rail, or building a custom hinge bracket to fit an odd gate post: that’s the work we actually enjoy. Custom welding in Lakeland runs $150-$500 for most repairs, and we quote the job before the torch comes out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeland
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule for Lakeland gate motor & opener repairs. In Lakeland specifically, we keep same-era FAAC, Viking, and DoorKing boards and arms on hand because those are the units installed during the 2005-2012 build-out, and they’re failing in clusters now. If your operator is a Ghost Controls or Elite unit, we can usually have specific parts in within a day or two and install them the moment they arrive.
Common Gate Parts & Welding Problems We See in Lakeland Homes
- Clay heave pushes gate posts out of plumb. Shelby County’s expansive clay shrinks in dry spells and swells after rain. Over a decade, that movement walks a gate post enough to bind the hinges and crack welded joints. No amount of hardware adjustment fixes the footing.
- 2005-2012 underground hydraulic swing operators are failing in waves. Lakeland’s residential gate stock was built by a small number of regional builders over a compressed window. That means the same operator models reach end-of-life at the same time across whole neighborhoods. We stock parts for those specific units.
- Ice storms crack keypads and snap operator arms. Lakeland gets more freezing rain than snow. Water gets into plastic keypad enclosures, freezes, and splits the housing. Operator arms that weren’t winterized snap at the weak point. We replace and seal them properly for the next storm.
- Weld fatigue on ornamental iron gates. Heavy estate gates flex every time they cycle. After 10-15 years, the welds at stress points crack. We see it at the hinge side most often. If you catch it early it’s a $200 repair. If it cracks through, you’re replacing the rail.
Pricing for Gate Parts & Welding in Lakeland, TN
Here’s what we actually charge in Lakeland so you know what to expect before anyone shows up. Hinge replacement: $180-$420. Post replacement: $450-$1,200. Rail repair: $200-$600. Custom welding: $150-$500. Operator board replacement for the common 2005-2012 underground units: $350-$850 installed. Parts and labor are quoted and agreed before any work starts, and the price on the quote is the price on the invoice.
We don’t charge a trip fee inside the county. We take $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. And if you have a written estimate from another company, we’ll give you a free second opinion. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Lakeland
Based out of the Memphis metro, we cover Lakeland and the surrounding communities, including Arlington, Bartlett, Millington, and Germantown. If you’re a few minutes outside the 38014 zip and need gate parts or welding, call and we’ll get you on the schedule.
Serving Lakeland, TN - Our Local Coverage Area
We’re based in the Lakeland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lakeland
Because the expansive clay under the post footing moves with the seasons, slowly pushing the post out of plumb over years. The hinge then carries the gate at a bind, and the leaf sags from the hinge side. The fix is resetting the post on deeper concrete piers below the movement zone, not cranking the hinges harder. Call (877) 610-2993 if your gate is dragging, and we’ll tell you honestly whether the post is the problem.
Yes, and we already stock the common ones. Because Lakeland’s gates were built by a small number of builders over a short window, we carry FAAC, Viking, and DoorKing boards and arms from that era on the truck. It’s why we can often finish a repair same-day that another shop would have to order for. Estimates are free.
We re-set the post footing first, then realign the gate, then replace any worn hinges or cracked welds. If you skip the footing and just adjust hardware, the gate will sag again within a year. Lakeland’s soil doesn’t stop moving, so the footing has to get below the movement line. Call us for an exact quote before any work starts.
We do, and we weld on site so your gate never leaves your property. Scrollwork repair, custom hinge brackets, reinforcing cracked rails, patching rust-through on the bottom rail of an estate gate: that’s standard work for us, not a special order. Custom welding in Lakeland runs $150-$500 for most jobs.
If the photocells are cracked or shorted, the operator will usually refuse to close, or it will reverse every time. We replace the photo eyes with sealed units rated for freeze-thaw cycles and test the entrapment protection so the gate closes safely. It’s a $150-$300 fix in most Lakeland homes. Call (877) 610-2993 and we’ll get someone out.
Call Gatewood Fence & Gate for Gate Parts & Welding in Lakeland
If your gate is sagging, dragging, cracked, or throwing operator errors, call (877) 610-2993. A live person answers, day or night. We’ll give you an upfront price, show up in the window we promised, and fix the gate in your driveway. Hal’s name is on the shop, and the 90-Day Done Right Promise is on every invoice in writing. Serving Lakeland and the surrounding Shelby County communities.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeland since 2001.