Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lake Dallas
If your gate in Lake Dallas sags, won’t latch, or the hinges have rusted through, the fix usually comes down to the right parts and a welder who will actually weld on site rather than haul your gate away. We handle everything from basic repairs to full Gate Installation - Lake Dallas projects. A hinge replacement or post reset in Lake Dallas typically runs $180-$450, and most repairs we handle are completed the same day we arrive. Call Hal Gatewood at (877) 610-2993 and you’ll get a live person, a straight answer, and a price agreed before we touch anything.
Lake Dallas isn’t like the inland suburbs. The moisture coming off Lake Lewisville changes how fast gate hardware fails, and we’ve spent years learning exactly what holds up and what doesn’t along the shoreline streets. When your gate stops closing on its own, the problem is almost never where you think it is.
Why Gatewood Fence & Gate Is Lake Dallas’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That matters in a town the size of Lake Dallas, where your fence guy is somebody you’re going to run into again at the hardware store. Our Gate Parts & Welding crew doesn’t send a different subcontractor every time you call. The person who shows up works for Hal, wears a uniform, and has passed a background check.
We answer the phone 24 hours a day with a live person. Not a voicemail queue, not a chatbot. Call at 2 a.m. because a windstorm off Lake Lewisville sheared a hinge and your gate is lying in the driveway blocking your car. Somebody picks up and starts figuring out when we can get there. Our service area includes all of Lake Dallas, and we can usually reach most addresses in under an hour when it’s urgent.
The 90-Day Done Right Promise is printed on every job we do. If a weld cracks or a hinge works loose within 90 days, one call brings Hal back. That’s not a marketing line. It’s a written promise, and the shop is just down the road, not three states away.
Our Gate Parts & Welding Services in Lake Dallas
Most gate failures in Lake Dallas come down to four things: hinges, posts, rails, and the welds holding them together. We stock the parts for the common brands and weld the rest on site in your driveway. Here’s how each one works:
Hinge Replacement
A hinge that looks fine from the driveway side is often corroded through inside the barrel, especially on lakeside properties where prevailing southeast winds carry moisture off Lake Lewisville. We cut out the old hinge, weld the new one in place, and use stainless fasteners rated for constant moisture exposure. On swing gates in Lake Dallas, we almost always recommend barrel-style hinges with grease fittings on the lake side so you can lubricate them without removing the gate.
Post Replacement
The Blackland Prairie clay under Lake Dallas shrinks in summer drought and heaves after every heavy rain. Posts set shallow in that soil lean, crack the surrounding concrete, and eventually pull a gate out of alignment until the latch won’t catch. We cut out the failed post, drill a new footing deep enough to reach stable soil, and set the replacement post with concrete that won’t float loose. A post replacement in Lake Dallas typically runs $350-$750 depending on depth and whether the concrete base needs demolition.
Rail Repair
When a gate sags, most people assume the middle of the gate is bending. It’s usually the post-to-rail joint cracking. We weld in reinforcement plate at the stress point, re-align the gate, and the gate works again without buying a whole new one. That repair-first approach is why homeowners in Lake Dallas call us instead of a company that only sells gates.
Custom Welding
Older lake-cottage homes from the 1960s and 70s in Lake Dallas often have ornamental iron gates you can’t buy off a shelf. Curved pickets, custom scrollwork, post caps that match the house’s mid-century lines. We reproduce those pieces in our shop and weld them in place so the gate still looks original. Whether it’s a hinge tab, a missing picket, or a full frame reinforcement, the wheeled gate stays in your driveway, not on a truck heading to a shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Dallas
Most automated gates in Lake Dallas run on DoorKing, Elite, or Ghost Controls openers, and we’re certified to service all of them as part of our Lake Dallas Gate Motor & Opener work. We keep common replacement parts on the trucks for these brands so a bad control board or limit switch doesn’t mean a two-week wait while somebody orders parts. For mechanical hardware, we stock hinges, roller assemblies, and latch sets sized for the gate frames common in the area, including the heavier wrought-iron driveway gates you see on newer homes along Lake Lewisville Drive.
When a gate operator fails, it’s rarely the motor. It’s usually a limit switch, a photocell burned out from power surges, or a control board that took a hit from a lightning strike off the lake. We diagnose the actual fault and replace only what failed.
Common Gate Parts & Welding Problems We See in Lake Dallas Homes
- Rusted hinge barrels on lakeside gates. The southeast winds off Lake Lewisville push fine moisture onto properties along the western and southern shoreline. Hinges there pit and corrode from the inside out, failing in 5-7 years even when the gate face still looks clean.
- Leaning posts from Blackland Prairie clay. This soil expands after rain and shrinks in drought. It’s particularly bad in the 75065 zip code where whole subdivisions sit on old lakebed sediment. Post lean cracks welds at the base before the gate even starts to rust.
- Operator boards burned out by storms. Lake Lewisville attracts lightning during spring storm season, and we replace a lot of control boards in Lake Dallas after a direct strike nearby. A surge protector on the operator circuit costs less than the board it protects.
- Ornamental iron gates sagging at the hinge post. On the 1960s and 70s lake-cottage lots, the original gates were mounted on posts set in whatever the developer had on hand. Decades of shifting soil and moisture have those posts leaning and the welds at the post-to-rail joint cracking. We see this every week.
On a 1970s lake-cottage property south of Main Street, our crew pulled an original ornamental iron swing gate that had sagged until the latch no longer caught. The hinge post was set in Blackland Prairie clay that had heaved over decades, and the lower hinge barrel had corroded through from constant moisture off Lake Lewisville. We cut out the failed post, poured a new post footing with concrete that reached stable soil, welded a reinforced hinge post with stainless fixings, and re-hung the gate so the latch aligned without sag correction. That gate’s been working since, and the customer still waves at Hal at the gas station.
Pricing for Gate Parts & Welding in Lake Dallas, TX
| Service | Typical Price Range in Lake Dallas |
|---|---|
| Hinge replacement (single gate) | $180 - $350 |
| Hinge replacement (double driveway gate) | $320 - $600 |
| Post replacement, standard depth | $350 - $550 |
| Post replacement, deep footing in clay | $550 - $750 |
| Custom welding (broken picket, hinge tab, crack repair) | $120 - $280 per weld point |
| Rail repair with reinforcement plate | $200 - $400 |
| Full ornamental gate re-hang and re-align | $400 - $850 |
These are real ranges for the Lake Dallas market, based on what we’ve quoted and completed in neighborhoods from the lakefront streets off Lakeshore Drive to the newer subdivisions near Corinth Parkway. The price depends on the size of the gate, whether the post has to be drilled out of concrete, and how much metal has to be cut away before we can weld clean. What it never depends on is what we think you’ll pay. You get a written number before work starts, and that’s the number you pay. Estimates are free, there’s no trip charge inside the county, and any repair over $200 takes $40 off. Seniors and veterans always get 10% off, no coupon required.
We Also Serve Cities Near Lake Dallas
We’re local to Lake Dallas, and our trucks are in the area every day. If you’re in Gate Parts & Welding in Lake Dallas, Corinth, Highland Village, Lewisville, or Flower Mound, call the same number: (877) 610-2993. Same crew, same promise, same owner.
Serving Lake Dallas, TX - Our Local Coverage Area
We’re based in the Lake Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lake Dallas
It’s the moisture coming off Lake Lewisville. Prevailing southeast winds push damp air onto the western and southern shoreline of Lake Dallas, and that constant fine moisture attacks hinges from the inside out. Your friend in Corinth is far enough from the water that the same brand of hinge lasts a decade or more. For lake-adjacent properties, we recommend stainless steel hinge barrels and grease fittings, which cost a little more up front and save you a replacement in five years.
It’s worth it if the post is set deep enough to reach stable soil below the active clay layer. The Blackland Prairie clay under Lake Dallas shrinks and heaves in the top few feet, but below that the soil is stable. We drill post holes deeper than the original contractor did and use more concrete than the original pour. A post set properly in that deeper footing will stay put for decades. The old post wasn’t failing because the soil is impossible. It was failing because it was set too shallow.
We weld it on site, in your driveway, with the gate still on its hinges whenever possible. If the damage is at the hinge post or the bottom rail, we’ll lift the gate off, weld it, and re-hang it the same day. We don’t haul your gate to a shop unless the damage is extensive enough that off-site jig work is the only way to keep it square, which is rare. Call (877) 610-2993 and we’ll tell you what your specific gate needs.
Usually, yes. Storms off Lake Lewisville knock tree branches and debris into the gate’s path, and the photocell sees an obstruction that isn’t there. Sometimes the photocell itself is water-damaged from wind-driven rain, which happens more often on lake-facing properties. We diagnose whether it’s the photocell, the wiring, or the operator board, and replace only what’s actually failed. If it’s a DoorKing, Elite, or Ghost Controls unit, we likely have the part on the truck.
Yes, because stainless steel is corrosion-resistant through the entire piece, not just coated on the surface. Galvanized hinges hold up fine inland, but the constant moisture off Lake Lewisville eventually finds the microscopic pinholes in the galvanizing layer and rust starts underneath. Stainless costs more per hinge, but we’ve pulled galvanized hinges off lakefront gates in Lake Dallas after five years that were corroded through from the inside. On the lake side, stainless is the specification that actually lasts. Call (877) 610-2993 for a free estimate and an honest recommendation for your gate.
Get Your Lake Dallas Gate Fixed Today
If your gate won’t latch, sags at the hinge post, or the operator is dead, call (877) 610-2993. A live person answers. We’ll schedule a time that works, show up when we say we will, and hand you a written price before any work starts. Free estimates, no trip charge inside the county, and every job backed by the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on every invoice. In Lake Dallas, that still means something.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lake Dallas and the surrounding area.