Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lago Vista
Gate parts and welding in Lago Vista usually means one of two things: a swing gate that has sagged past the latch after a storm, or a frame that cracked at a hinge weld. Most repairs run between $185 and $475 when we’re replacing a hinge, re-hanging a post, or welding a cracked picket or frame member. We get to Lago Vista fast, and we do the weld work right in your driveway so the gate never leaves your property. Call (877) 610-2993 and you’ll get a live person, not a menu.
Why Gatewood Fence & Gate Is Lago Vista’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and the name is still on the door and on every invoice. When you call about a gate problem in Lago Vista, you’re talking to someone who has seen how caliche and limestone treat a hinge post, not a call center reading a script. We serve Lago Vista regularly, and we know the rhythm of the place: lake humidity, flash flood debris, and wind that comes down off the hills without much warning. A live person answers the phone 24 hours a day, seven days a week.
We’re licensed, insured, and background-checked, and the person who shows up at your gate is the person whose work we stand behind with a 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Your gate is the first thing you touch when you leave in the morning and the last thing you close at night. In Lago Vista, it’s also the thing that takes the full brunt of Hill Country storms. We fix gates the way we’d want them fixed at our own house: the post first, the hinges second, and the weld last, because that’s the order the failure happens in.
Our Gate Parts & Welding Services in Lago Vista
Hinge Replacement
Hinge replacement in Lago Vista is rarely just swapping a hinge. The slope and the wind mean the hinge has been working harder than it was ever rated for. We cut out the old weld, check the post for movement, and install a heavier hinge with the geometry corrected for your gate’s swing. A typical hinge replacement on a tubular steel gate off Lohman Ford Road runs $185 to $320 per hinge, depending on gate weight and how much weld cleanup is needed. We do it on site.
Post Replacement
This is the Lago Vista specialty, honestly. The caliche and limestone bedrock make digging a proper post footing miserable, which is why so many older gates have posts set 18 inches deep when they should be 36. A shallow post leans, the gate drags, and the hinge welds crack. Post replacement in Lago Vista runs $400 to $1,100 when we’re chipping out rock, setting a new steel post in high-strength grout, and re-hanging the gate to plumb. We always quote the post job before we start, and the price on paper is the price you pay.
Rail Repair
Rails crack where the pickets meet the horizontal, especially on solid infill gates that catch wind. We straighten, sleeve, or replace the rail and weld it square. Rail repair in Lago Vista typically runs $150 to $380 per rail, more if we need to pull and reposition the gate to reach the bottom rail. The goal is a gate that doesn’t look like it was patched, and doesn’t sag again next season.
Custom Welding
Custom welding in Lago Vista covers everything from repairing a twisted frame to fabricating a new gate section to match your existing wrought iron. We weld in the driveway, not in a shop across town. Rates run $95 to $150 per hour plus materials, and for most frame repairs you’re looking at $250 to $600 total. If the crack is in a high-stress spot, we add a gusset or a doubler plate so the same crack doesn’t come back after the next storm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lago Vista
We service nine major gate brands, and on the parts and welding side that matters because the operator has to work with the gate, not against it. In Lago Vista we see a lot of Ghost Controls, DoorKing, and Elite operators on lake homes and hillside properties. We keep common hinge sets, rack and pinion gears, and weld consumables stocked for those systems so we’re not waiting on an overnight part. If your operator is fighting your gate after a repair, something’s off with the hinge or post geometry, and we fix that before we hand it back to you.
Common Gate Parts & Welding Problems We See in Lago Vista Homes
- Wind-loaded solid infill gates snapping hinge welds. A solid cedar or steel infill gate acts like a sail when wind comes down the hills. The hinge post takes the load, the root of the weld takes the fatigue, and the crack starts where you can’t see it until the gate is dragging on the latch side.
- Shallow caliche footings letting posts walk. Lago Vista’s limestone and caliche make 36-inch footings a brutal dig, so plenty of older installations went shallow. After a few flood seasons with saturated ground, the post shifts, the gate binds, and the hinges can’t hold the frame square.
- Debris-choked slide gate tracks. Storm runoff off the rocky slopes deposits gravel and cedar debris straight into slide gate tracks. The operator over-torques trying to move the gate, and the rack and pinion gears strip. A track that’s packed solid within one storm season is the single most common slide gate failure we see here, far more than in flat suburbs to the east.
- Rusted or seized hinge pins from lake humidity. The humidity off Lake Travis gets into hinge barrels and pins. A gate that used to swing freely starts to bind, and the operator’s motor burns out trying to overcome the drag. Replacing the hinge before it seizes saves you the motor.
Key takeaways: In Lago Vista, the post fails before the gate does. Wind and saturated ground are the two forces we’re always fighting. Most hinge, rail, and welding repairs run $150 to $600 on site. The quote you get before we start is the price you pay.
Pricing for Gate Parts & Welding in Lago Vista, TX
Here are honest ranges for the work we do most in Lago Vista: hinge replacement runs $185 to $320 per hinge, post replacement runs $400 to $1,100 when we’re chipping out caliche, rail repair runs $150 to $380 per rail, and custom welding runs $95 to $150 per hour. A full frame repair on a solid infill swing gate that caught a downslope gust usually lands between $300 and $700. Every price is quoted in writing before we strike an arc, and you’ll never get a surprise invoice at the door. We don’t do that. Call (877) 610-2993 for a free estimate, and remember the $40 off any repair over $200 and the permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Lago Vista
When we’re not in Lago Vista, we’re running calls through Leander, Bee Cave, Lakeway, and Cedar Park. The terrain changes east of the hills, but the standard doesn’t. If you’re just outside Lago Vista and wondering whether we’ll come out, call. The no trip charge inside the county applies whether you’re on Lohman Ford Road or over in Leander. Our Gate Parts & Welding team covers the whole corridor.
Serving Lago Vista, TX - Our Local Coverage Area
We’re based in the Lago Vista area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lago Vista
Because the wind load and the slope work together. A solid infill gate on a hill catches downslope gusts, and every gust loads the hinge post in exactly the direction it was never braced for. In Lago Vista, the footing is often shallow because the caliche made digging a full-depth hole too hard, so the post has less holding force to begin with. Flat neighborhoods in Leander or Cedar Park don’t get the same gust acceleration, and their soil digs easier, so the hinge post lives longer. If your gate sags or drags, call (877) 610-2993 and we’ll check the post before we touch the hinges.
Saturated ground softens the soil around the post, and on a slope that means the post can shift a fraction of an inch while the gate is at full swing. One small shift, repeated over a wet season, loosens the footing and throws the gate out of plumb. Once the gate binds at the latch, the hinge welds carry load they were never sized for, and the crack starts. We see this pattern constantly in Lago Vista after flash floods. If your gate was fine before the rain and dragging after, call us: the fix is usually shoring the post, not replacing the gate.
Almost always, yes. A frame crack at a hinge weld or a mid-rail split is a weld repair, not a replacement. In Lago Vista, many of the wrought iron and tubular steel gates on lake homes are worth saving, and welding them in place means the gate never leaves your driveway. We grind out the crack, weld it with proper penetration, and add a gusset or doubler if the crack was in a high-stress spot. Replacement only makes sense when the post has rusted through or the frame is bent beyond straightening.
First, locate the manual release handle or key on your operator, usually a small lever or pull ring on the side or bottom of the unit. Pull the release to disengage the motor from the gate, then move the gate by hand slowly. Never force it if it binds. On a slope in Lago Vista, brace the gate before releasing it: gravity will take it downhill fast, and a solid infill gate on a grade can hurt someone. If you’re not sure where the release is, call us before you pull anything.
Yes, and this one matters. When we re-weld a gate frame or re-hang a gate in Lago Vista, the operator still has to comply with current entrapment protection requirements, which means functioning photo eyes or contact edges and proper force settings. A custom weld that changes the gate’s weight or swing speed can throw off the operator’s force calibration, so we always test and reset the safety system after any structural weld repair. If your gate was welded by someone who skipped that step, call (877) 610-2993 and we’ll make it right.
Get Your Gate Parts & Welding Done Right in Lago Vista
Your gate is the first line of defense and the first impression. In Lago Vista, it’s also the part of your property that takes the most punishment from the hills and the weather. We weld on site, we fix the post before we hang the gate, and we put the 90-Day Done Right Promise in writing on every job. Call (877) 610-2993 now for a free estimate, or to talk through what you’re seeing at your gate. Hal or one of his crew will answer, and we’ll show up when we say we will.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lago Vista and the surrounding Hill Country since 2001.