Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kyle
Gate parts and welding in Kyle usually come down to one question: is the metal failing, or is the ground under it moving? Most of the time the ground is the culprit. Our crews work throughout Kyle, from Plum Creek to 6 Creeks to Anthem, and we have rebuilt enough gates on Blackland Prairie clay to know the pattern. If you need hinge replacement, post replacement, rail repair, or custom welding, call (877) 610-2993 and a live person answers. We show up when we say we will, and we weld on site so your gate stays in your driveway, not on a trailer headed to some shop.
Why Gatewood Fence & Gate Is Kyle’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That means something in a city like Kyle, where people still ask their neighbors who they used and whether the person showed up. We have earned a strong local reputation here by doing the opposite of what the national outfits do: we quote a price up front, we honor it, and if the work is not done right, the 90-Day Done Right Promise brings us back. One call. No runaround. That promise is in writing on every job.
Kyle homeowners tell us they want a name they can verify and a face they will see again. You get both. Hal is owner-operated, his address is published, and his license number is something anyone can look up. When you call at 2 a.m. because a gate is stuck half open, you do not get a voicemail. You get a person. That has been true for over 29 years across our service area, and Kyle is no exception.
We know the neighborhoods here. We know the builders who put in minimum-spec footings and the operators that were undersized from day one. That local knowledge means we do not waste your time guessing. We bring the right parts, the right welder, and the right fix the first trip out.
Our Gate Parts & Welding Services in Kyle
Most of what we do falls under the umbrella of Gate Parts & Welding, but in Kyle the work takes a specific shape. The clay soil and HOA-scale build-outs mean certain repairs dominate. These four services account for the bulk of our calls in 78640.
Hinge Replacement
Hinges bind when the post they are bolted to has moved. In Kyle’s subdivisions, that movement is almost always tied to expansive clay. We replace worn or seized hinges with heavy-wall components and, more importantly, we check the post alignment before bolting anything back on. If the post has rotated, new hinges alone will not hold. Most hinge replacements in Kyle run $120 to $350 per hinge, depending on gate weight and whether we need to cut off the old hardware or it unbolts cleanly.
Post Replacement
This is the real fix for most sagging or dragging gates in Kyle. A gate sags in the hinge post, not in the middle, and that is where we start. Builder-grade footings in neighborhoods like Plum Creek were often poured too shallow and too narrow for the clay they sit in. We excavate, pour a deeper footing, set a heavy-wall post, and weld or bolt the gate back square. A typical post replacement in Kyle runs $450 to $900, including concrete and finish work.
Rail Repair
Ornamental aluminum and wrought iron gates flex every time the soil heaves or dries. Over years, that repeated flexing cracks the rail welds. We grind out the cracked weld, prep the surface, and re-weld on site. If the rail itself is too fatigued, we fabricate a replacement section to match the existing style. Rail repairs in Kyle typically run $180 to $400, depending on how many pickets need to be worked around and whether the gate needs to be lifted off its hinges to access the joint safely.
Custom Welding
Not every fix is a repair from a parts catalog. Sometimes a gate needs a new receiver bracket for an operator we are installing, or a custom latch plate, or a reinforcement gusset where the builder cut corners. We weld on site, in your driveway, and we match the metal and finish to what is already there. Custom welding in Kyle starts around $150 for small jobs and climbs based on material thickness and access. We quote it flat before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kyle
We are certified to service nine major gate brands, but the ones we see most in Kyle are Viking, Ghost Controls, and DoorKing. Those builder-installed operators in Anthem and 6 Creeks are everywhere now, and a lot of them are aging past their mechanical sweet spot. We keep common parts on the truck for these brands, so if you need a replacement control board, a limit switch, or a new actuator arm, we can often handle it the same trip. Elite operators show up on some of the higher-spec custom gates, and we service those too. If your operator is acting up and the gate is still sound, a part swap beats a full replacement every time.
Common Gate Parts & Welding Problems We See in Kyle Homes
The soil here does not care about your HOA’s design standards. These are the four problems we see again and again across Kyle:
- Hinge posts rotated out of plumb. Minimum-spec footings in Blackland Prairie clay crack and heave within a few years. When the post moves an inch, the hinge bind starts and the sensors on your automatic gate start misaligning no matter how many times you adjust them.
- Rail welds cracking from repeated flex. Every drought-to-rain cycle moves the ground under your gate posts. The gate is bolted to posts on both sides, so the frame is literally twisted a fraction of an inch with every cycle. Over a decade, that fatigues the welds until they crack.
- Slide gate rollers wearing unevenly. On the rack-and-pinion slide gates installed during the mass build-outs, post movement throws the rack out of alignment. The rollers take the abuse, wear into an egg shape, and the gate starts dragging or stalling on the track.
- Builder-grade operators undersized for the gate. Developers spec the cheapest operator that meets the gate’s weight on paper. Four or five years in, with a little sag and a little friction, that operator is overloaded and failing. We see this pattern in Kyle’s newer subdivisions constantly.
Pricing for Gate Parts & Welding in Kyle, TX
Here is what you can expect to pay in Kyle for the most common gate parts and welding repairs:
- Hinge replacement: $120-$350 per hinge
- Post replacement with new footing: $450-$900 per post
- Rail repair or re-weld: $180-$400
- Custom welding, small job: $150-$350
- Gate roller replacement (slide gates): $90-$250 per roller set
What moves the price is access, gate weight, and whether the post below the hardware needs work too. You will know the price before we start. Not a range on the phone and a different number at your door. We quote it, you approve it, then we touch a tool. Every job qualifies for our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Kyle
Our crews cover Kyle and the surrounding Hays and Travis county communities consistently. If you are in Buda, Shady Hollow, Austin, or Hornsby Bend, the same crew, the same live-answer phone line, and the same 90-Day Done Right Promise apply.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kyle
The hinges are rarely the root cause. Kyle sits on Blackland Prairie expansive clay, and the volume builders who framed those subdivisions poured minimum-spec concrete footings that crack and heave as the soil shrinks in drought and swells after rain. The post moves, the hinge binds, and the hinge wears out or shears. Fix the hinge without correcting the post and you will fix it twice. We quote the post correction as part of the hinge repair when we see movement, and the price is agreed before we start. Call (877) 610-2993 and we will tell you what is actually moving.
Yes, in most cases. The gate itself matters less than the posts, the swing arc, and whether there is power nearby. We install operators from brands like Viking and Ghost Controls on existing ornamental gates regularly. What we will not do is hang an operator on a gate with a post that has already rotated, because the operator will fight the misalignment from day one and burn out early. We weld reinforcement and correct the post first, then mount the operator. The power run is a separate conversation: many Plum Creek gates were built without conduit to the post, and we can trench and run it properly. Ask for a free measure and written quote before committing to anything.
Stand at the latch side and site down the gate frame. If the gap at the top of the gate is wider or narrower than the bottom, the hinge post has moved. If the gate is square at the hinges but the middle of the rail is bowed downward, that is a failed or fatigued rail. In 6 Creeks specifically, we see post rotation more often than rail failure because of the clay movement under the footings. A sag that appeared gradually over a couple of drought-to-rain cycles is almost always post movement. We will tell you which it is within about ten minutes of looking at it, and the fix is quoted flat before work starts.
Every automatic gate needs a dedicated power line to the operator post, conduit for the safety photocell wiring on both sides of the gate, and in many cases a low-voltage run for the keypad or intercom. In Anthem and similar Kyle subdivisions, we frequently find the builder ran power but skipped the photocell conduit or buried the wire without conduit. Bare wire in Blackland Prairie soil does not last. We have rebuilt that exact setup off Kohlers Crossing: the hinge post had rotated an inch and a half, the LiftMaster photocells kept misaligning, and no sensor adjustment held until we excavated the footing, welded a new heavy-wall hinge post with a deeper pour, and replaced the sagging rail and hinges. The power and conduit work is part of what we quote up front, and it is discussed before any invoice is cut.
Yes. Automatic gates in Texas must meet UL 325 entrapment protection standards, which means photocells or contact edges that reverse the gate if something is in the path, plus proper force limits on the operator. This is not optional, and it is not something a handyman should be guessing at. We test the entrapment protection on every operator we service in Kyle, and if a sensor or edge is missing or bypassed, we flag it and quote the correction. An operator that will not reverse on a child or a pet is a liability, full stop. Call (877) 610-2993 if you are not sure your gate is compliant, and we will check it.
Get Your Kyle Gate Fixed Right the First Time
If your gate is sagging, binding, stalling, or coming apart at the welds, do not wait for the next rain cycle to make it worse. Call (877) 610-2993 today. You will get a live person, a straight answer, and a quote before any work begins. Free estimates, upfront pricing, and the 90-Day Done Right Promise in writing on every single job. Hal Gatewood’s name is on the work, and that is the oldest guarantee there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kyle since 2001.