Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kingsgate
Post replacement and weld-on hinge repair in Kingsgate, WA typically runs $260-$540 depending on whether we’re re-setting one post or rebuilding a rotted cedar section, and most jobs are done in a single visit. The real issue in Kingsgate isn’t usually the gate hardware itself. It’s the slope and the rain. When a downhill post leans two inches out of plumb, new hinges won’t fix the sag. We start with the post, then we weld. Call (877) 610-2993 and Hal or his crew will look at your gate in person, give you a written price, and do the work right there in your driveway.
Why Gatewood Fence & Gate Is Kingsgate’s Preferred Gate Parts & Welding Company
Hal Gatewood has been installing and repairing gates in Kingsgate since 2001, and the shop is set up for exactly the kind of work Kingsgate’s older cedar gates need. We don’t haul your gate to a distant shop or tell you the only fix is a full replacement. We bring the welder to you, on Kingsgate’s side streets and up the long driveways that wind through the neighborhoods off 124th Ave NE. The person who answers the phone is the same person who shows up. A live human, 24 hours a day, seven days a week, not an answering service or a menu you have to fight through.
Kingsgate homeowners have a specific complaint we hear constantly: somebody swapped the hinges, charged them for it, and the gate sagged again before the next storm. That’s because the hinge post was never the problem, or it was the problem and got ignored. Hal holds to a repair-first approach. If a component is still sound, we don’t replace it. If the post is shot, we say so, show you why, and re-set it in fresh concrete before we ever touch a hinge. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround.
The name is on the shop, and the shop is down the road. For Kingsgate residents, that means you can drive by, look at the work being done, and hold us accountable face to face. That’s the oldest accountability there is, and it’s why our Kingsgate customers keep our number in their phones instead of searching for a new gate company every season.
Our Gate Parts & Welding Services in Kingsgate
Post Replacement
On Kingsgate’s rolling hills, the downhill post is the first thing to fail. Lot grading from the 1970s through early 1990s means many gates were installed across sloping ground, and water tracks downhill and pools around the lower post base. We dig out the old footing, re-set the post in fresh concrete with proper drainage, and brace it plumb before the concrete sets. A typical post replacement in Kingsgate runs $280-$420 per post, including digging, concrete, and re-hanging the gate.
Custom Welding
Rotted cedar bottom rails and cracked pickets don’t need to mean a whole new gate. We weld custom steel reinforcement plates, corner brackets, and internal frames directly onto your existing gate to restore strength and square. For a 1970s cedar gate on a ranch home off 124th Ave NE, a welded steel frame inside the existing panels can add another ten or fifteen years of life. Custom welding in Kingsgate generally runs $180-$380 depending on the amount of steel and weld time needed.
Hinge Replacement
Original galvanized hinges from the 1980s and 1990s have taken four decades of Kingsgate’s October-through-April wet season. They seize, they corrode, and they snap. We replace them with weld-on or bolt-on hinges sized for the gate’s real weight, not the weight it had when it was installed. Hinge replacement in Kingsgate runs $90-$160 per hinge including labor, and we won’t sell you hinges if the post itself is moving.
Rail Repair
Cedar bottom rails soak up ground moisture and rot first at the post connection, which is exactly where the load sits. We splice in new pressure-treated or cedar rails, weld steel splice plates across the joint when the gate needs added rigidity, and seal the end grain so the repair doesn’t become a repeat problem in two wet seasons. Rail repair work in Kingsgate typically runs $140-$260 depending on rail length and the condition of the pickets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kingsgate
We service and install parts for nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite, so when a Kingsgate customer calls with a gate motor or opener problem, we’re not learning the manufacturer on the fly. We stock common rollers, hinges, latches, and weld tabs for those systems in our shop, which means less waiting on a parts shipment when your gate is stuck open. If you’ve got a Ghost Controls opener on a side gate that won’t trip or a Viking arm on a sloped driveway gate that’s binding, call us. We know these systems by the part, and we fix them in Kingsgate without a return trip for forgotten hardware.
For the full picture on parts sourcing, welding service, and repair philosophy, see our Gate Parts & Welding hub page.
Common Gate Parts & Welding Problems We See in Kingsgate Homes
- Downhill hinge posts leaning out of plumb. Kingsgate’s subdivisions were built on the rolling hills of northwest Kirkland, and the lower post on any gate set across that grade takes constant soil pressure and water drainage. Hardware-only fixes wear out within months because the underlying post is moving. We re-plumb and re-set the post before we touch the hinges.
- Rotted cedar bottom rails and post bases. Kingsgate gets 37 to 50 inches of rain a year with a wet season that runs from October through April. Those original cedar gates from the 1970s through early 1990s have had ground-line moisture on them for 30 to 50 years, and the wood eventually lets go. We rebuild rails and rework post bases instead of band-aiding them.
- Corroded galvanized hardware past function. Original hinges and latches on Kingsgate’s original cedar gates are zinc-coated steel that has been through decades of Pacific Northwest humidity and rain. They rust into place, snap under load, or wallow out their screw holes. Weld-on replacement tabs are the durable fix.
- Gates sags returning after a hardware swap. A gate sags in the hinge post, not in the middle, and if the post moves, the gate moves. That’s why a cheap hinge replacement on a Kingsgate slope lasts a season and fails. We fix the post first and the hinges second.
Pricing for Gate Parts & Welding in Kingsgate, WA
Here’s what Kingsgate homeowners should expect to pay, based on the work we’ve done throughout the 98034 zip code:
- Post replacement (dig, set, concrete, re-hang): $280-$420 per post
- Custom welding (steel reinforcement plates, corner brackets, splice repairs): $180-$380
- Hinge replacement including labor: $90-$160 per hinge
- Rail repair with splice and sealing: $140-$260
- Gate rollers, latch, and lock replacement for automatic and manual gates: $75-$220 depending on hardware
Every price is quoted and agreed in writing before any work starts. You’ll know the number when Hal looks at the gate, and that’s the number on the invoice. We don’t find a reason to charge more once the work begins. Kingsgate customers also get $40 off any repair over $200, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. There’s no trip charge anywhere in the county. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Kingsgate
If you’re just outside the Kingsgate boundary, you’re still in our service area. Our Gate Parts & Welding crew works regularly in Inglewood-Finn Hill, Kirkland, Kenmore, and Bothell, covering the same sloped terrain and wet-season gate failures we see in Kingsgate. Same phone, same pricing, same promise.
Serving Kingsgate, WA - Our Local Coverage Area
We’re based in the Kingsgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kingsgate
Welding alone will not fix it unless the post is already plumb and solid. On Kingsgate’s graded lots, the downhill post sits in the path of runoff and shifting soil, so it slowly leans and takes the gate with it. The permanent fix is removing the old footing, re-setting the post in new concrete, and only then welding any cracked rails or hinge tabs. If a welder skips the post and only patches the gate, the sag comes back. Call (877) 610-2993 and we’ll check the post first, then quote the weld work based on what’s actually needed.
In most Kingsgate cases, yes. If the steel post is still structurally sound despite surface rust, we grind it clean, weld on new hinge tabs sized for the gate’s weight, and bolt the new hinges in place. Replacing the whole gate is rarely the right call for a hinge problem. We’ll tell you honestly if the post itself is too far gone, and we’ll give you a written price before any welding starts.
We remove the rotted section at the base, set a new pressure-treated post or steel sleeve depending on the gate’s construction, pour fresh concrete with proper drainage, and brace it plumb while the concrete takes initial set. Then we re-hang the gate and adjust the latch. On Kingsgate cedar gates that have sat in wet ground for 30 to 50 years, this is the fix that stops the chronic sag. The job usually takes one visit, and the gate stays square through the next wet season.
That’s one of the most durable repairs we do in Kingsgate. We weld a steel perimeter frame or corner reinforcement inside the existing cedar panel, which keeps the pickets aligned and transfers load to the hinges instead of the soft wood rails. It keeps the original look of your gate while stopping the twisting and drooping that Kingsgate’s wet season accelerates. A framed repair typically costs less than a new cedar gate and outlasts it.
Usually it’s a misalignment caused by a shifting post or a warped gate panel, not the photocell itself. When the post leans on a Kingsgate slope, the gate swings on a slightly different arc and breaks the safety beam. We check the post alignment first, then the gate access control arms and limit switches. If the post is moving, the fix is a post replacement or a welded reinforcement, not a new operator. Call (877) 610-2993 and describe what you’re seeing, and Hal can usually tell you over the phone whether you need parts, welding, or a post reset.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kingsgate since 2001.