Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kings Point
If you’re searching for gate parts and welding in Kings Point, here’s what you need to know up front: most hinge replacements run $180-$400, post replacements run $350-$900 depending on depth and concrete work, and custom welding jobs typically start around $150 for minor rail repairs and reach $600-$1,200 for structural rebuilds. We’re Gatewood Fence & Gate, and we’ve been welding and repairing gates in South Florida since 2001. Hal Gatewood’s name is on the shop, and the person who shows up in Kings Point will be someone who has worked on gates exactly like yours. Call (877) 610-2993 and a live person answers, day or night.
Kings Point isn’t like Delray Beach or Boynton Beach. Every gate in the 33484 ZIP sits under the master HOA and its layered condo associations. That changes how parts get approved, how repairs get scheduled, and who has to sign off before a single weld goes down. We know that process, and we work with the property managers who run it.
Why Gatewood Fence & Gate Is the Name Kings Point Property Managers Keep On File
The relationship matters more in Kings Point than anywhere else we work. A single gate-repair vendor who earns approval from the Kings Point master association gains access to ongoing maintenance work across thousands of units. But that approval doesn’t come from a website or a coupon. It comes from showing up, documenting the work, and standing behind it. Our Gate Parts & Welding crew works directly with on-site management offices. We provide photographs, material specs, and clear written quotes before any board votes. That’s not bureaucracy to us. It’s how the community protects itself.
Our team has handled hinge replacements, custom welding, and opener swaps throughout Kings Point’s villa clusters and condo sections. We answer the phone with a real person 24 hours a day, seven days a week. No voicemail, no call queue, no middleman. And every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. Hal Gatewood has been running this company since 2001, and his address and license number are published for anyone to check. That’s the old accountability, and it’s the only kind that works around here.
Our Gate Parts & Welding Services in Kings Point
Hinge Replacement
Hinge replacement in Kings Point almost always comes with a board or management company involved. The 1970s and 1980s build-out means hundreds of gates were installed with the same hinge hardware, and that hardware is now failing in the same places. A sagging swing gate at a villa off Kings Point Drive isn’t just a hinge issue, it’s a safety issue and a liability issue for the association. We weld on site, so the gate stays where it belongs while we cut out the rusted hinge and mount a new one with the correct spacing and penetration. Expect $180-$400 per hinge depending on post condition and whether we need to reinforce the mounting plate.
Post Replacement
In Kings Point, post replacement usually means dealing with steel posts set in concrete that’s been absorbing Palm Beach County humidity for 40 years. The post rusts at the soil line, the gate leans, and the whole rail system pulls out of alignment. We dig out the old footing, set the new post with proper depth and kicker bracing where needed, and weld the hinges back into a square, plumb position. Most post replacements in Kings Point run $350-$900. The range reflects whether we’re pulling a single gate post or a double post that carries the operator arm too. A gate sags in the hinge post, not in the middle, and that’s where we start.
Rail Repair
Welded steel rails on Kings Point gates take a beating from salt-heavy air, especially near the lakes and low-lying drainage areas. We regularly see bottom rails where the weld at the hinge stile has rusted through, leaving the gate panel to twist under its own weight. Fix the panel without the post and you’ll fix it twice. Our rail repairs typically run $150-$450, and we do the welding in your driveway, not in a shop across the county. Hal will look at the whole gate before he torches anything, because a twisted rail usually means something upstream moved first.
Custom Welding
Custom welding is where we earn our keep in Kings Point. When a 1980s-era gate has a cracked upright or a missing picket that no catalog part will match, we fabricate it. We’ve built replacement sections, reinforced failing frame corners, added operator mounting plates, and modified gates to accept modern UL 325 entrapment protection hardware without replacing the whole leaf. Custom welding jobs in Kings Point start around $150 and can reach $1,200 for substantial structural work. You get a quote before the first arc strikes, and the price is agreed before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kings Point
The original equipment across Kings Point’s entry systems and cluster gates skews heavily toward FAAC, Viking, and DoorKing, with some Ghost Controls and Elite units retrofitted in the past decade. We’re certified to service all of those brands, which matters when a board wants to upgrade an operator rather than replace it. More importantly, we know which parts cross-reference with obsolete hardware. If a Viking arm from 1983 is no longer manufactured, we can usually source a functional equivalent or fabricate an adapter rather than condemning the whole gate. That repair-first approach keeps association budgets intact and keeps gates closing on schedule.
Common Gate Parts & Welding Problems We See in Kings Point
- End-of-life swing-arm operators from the 1970s and 1980s build-out. Entire sections of Kings Point were bulk-installed with the same operator hardware, and that hardware is now reaching simultaneous failure. Instead of one board member fielding a single repair quote, property managers are batch-replacing obsolete parts across dozens of cluster entries at once.
- Lightning-damaged control boards and loop detectors. Afternoon thunderstorms in Palm Beach County bring frequent lightning strikes, and many of Kings Point’s small cluster-entry panels lack the surge protection they need. When a strike hits, the circuit board fries. We replace boards, add surge suppression, and get the gate back in service the same day when parts are on hand.
- Rust at welded steel joints. Kings Point’s humidity and proximity to lakes and drainage areas means welded steel rails, hinge posts, and rack-and-pinion teeth corrode faster than in drier inland communities. We cut out the cancer and weld in fresh steel, often without removing the gate from its hinges.
- UL 325 entrapment protection errors on retrofitted gates. Older Kings Point gates were never designed for modern safety-edge and photo-eye technology. When an association adds that hardware, the wiring and mounting points often fail. We fabricate proper brackets, run the wiring through sealed conduit, and test the full entrapment circuit before we call the job done.
Pricing for Gate Parts & Welding in Kings Point, FL
Here are real numbers for the Kings Point market, not national averages that mean nothing in a 55+ gated community with 40-year-old gates.
- Hinge replacement: $180-$400 per hinge, depending on post condition and reinforcement needs
- Post replacement: $350-$900, based on footing size, depth, and whether the operator arm mounts to the same post
- Rail repair and custom welding: $150-$450 for typical rail work; $600-$1,200 for structural rebuilds and fabrication
- Operator board replacement and surge protection: $250-$700 depending on brand and board availability
What affects your price is straightforward: how much steel needs to be replaced, how deep the footing runs, and whether the association requires written documentation, photos, and a formal quote before approval. We provide all of that at no charge. Our price is quoted and agreed before any work starts. Every job includes the 90-Day Done Right Promise in writing. Senior and veteran discounts apply at 10%, and we offer $40 off any repair over $200 plus no trip charge inside the county.
We Also Serve Cities Near Kings Point
Our crews work throughout Palm Beach County’s western corridor. If you’re outside the Kings Point gates, we also serve Kings Point neighbors in Delray Beach, Boynton Beach, Boca Raton, and Boca Del Mar. Same crew, same promise, same live person on the phone at (877) 610-2993.
Serving Kings Point, FL - Our Local Coverage Area
We’re based in the Kings Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kings Point
The Kings Point master association and your condo board must approve any gate work before we touch it. That means photographs of the damage, a written scope of work, material specifications, and often a board vote. We handle that paperwork for you and deliver it to the on-site management office directly. Call (877) 610-2993 and we’ll walk the approval path with you from the first inspection.
Because the original 1970s and 1980s installations used similar-grade steel posts set directly into concrete without drainage planning. Four decades of Palm Beach County humidity and rain wicks moisture down to the post base, where it rusts from the inside out. The middle of the gate rarely fails first. The hinge post gives way, the gate leans, and everything after that is a symptom. We replace posts with properly drained footings and seal the weld points.
Yes, in most cases. Many Kings Point cluster gates came with FAAC or Viking operators that are now obsolete. We’re certified across DoorKing, Elite, Ghost Controls, and other brands, so we can swap in a modern operator with proper UL 325 entrapment protection while keeping the existing gate leaf. The association gets an upgrade without paying for a whole new gate. We’ll provide the specs for board approval.
It means the gate’s safety system detected a fault in one of the required entrapment-protection devices, usually a photo eye, an edge sensor, or the contact reversal circuit. On older Kings Point gates, this often happens when a retrofit sensor is wired into a panel that wasn’t designed for it. We diagnose the fault, replace the failed component, and test the full circuit so the gate meets current safety standards. Leaving it in error isn’t safe, and the association’s liability is real.
Start with a documented inspection and a written quote that names the exact parts, materials, and timeline. That’s what boards need to move. Call (877) 610-2993 and we’ll schedule the inspection, prepare the quote, and hand it to your property manager. Most villa hinge repairs in Kings Point get approved within a few days once the paperwork is in front of the right person. We’ll coordinate directly with the office so you don’t have to chase it.
Contact Gatewood Fence & Gate in Kings Point
If your gate needs hinge work, post replacement, welding, or parts, call us at (877) 610-2993. You’ll get a live person, a straight answer, and an honest price. Hal Gatewood has been doing this since 2001, and his name is on the shop. He’ll stand behind the 90-Day Done Right Promise on every job in Kings Point, and he’ll show up when he says he will. Reach out today for a free estimate, and you can drive to the shop and look him in the eye if you’d rather.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kings Point and South Florida since 2001.