Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kaufman
Gate parts and welding in Kaufman usually means one of two things: a hinge post that has moved, or a weld that finally let go after years of Blackland Prairie clay working against it. We fix both, right where the gate stands. Hal Gatewood has been welding and repairing gates since 2001, and our crew knows what Kaufman’s soil does to steel and concrete. If your gate drags, binds, or won’t latch, call (877) 610-2993 and a live person answers. Not a voicemail, not a call queue. A person who can tell you when we’ll be there.
Why Gatewood Fence & Gate Is Kaufman’s Preferred Gate Parts & Welding Company
We’re not a franchise rolling through with a logo on a rented van. Gatewood Fence & Gate is locally owned and owner-operated, and Hal’s name is on the shop and on every invoice. Kaufman homeowners call us because they want the person who shows up to be the same person they talked to on the phone, and because our Gate Parts & Welding work comes with the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
Our crew works Kaufman regularly, from the older county-seat homes near the downtown square to the ranch acreage off CR 4055 and the newer subdivisions on 1 to 5 acre lots along the US-175 corridor. We answer calls 24/7, and we show up when we say we will. Background-checked, uniformed, and driving a truck with the shop’s name on the door. The oldest accountability there is: you’ll see us at the hardware store.
Our Gate Parts & Welding Services in Kaufman
We repair what other companies want to replace. A sagging gate is rarely a “whole new gate” problem. It’s usually a hinge tab, a post, a roller, or a weld. Here’s what we do most in Kaufman.
Hinge Replacement
Hinges on Kaufman gates fail in a pattern. The post leans, the hinge binds, and the gate starts dragging. We cut off the old hinge tabs, weld new ones at the correct angle, and set the gate so it swings clean. If the post is the problem, we deal with that too, not just the hinge.
Post Replacement
This is the big one in Kaufman. Houston Black clay shrinks in summer drought, and a post set in a shallow footing will lean 2 to 3 inches out of square by August. We dig it out, set a new post deeper and wider than the old one, and brace it in concrete that resists seasonal movement. You don’t fix the panel without the post. You’ll fix it twice. We start with the post.
Rail Repair
Rails on swing gates take a beating, especially on long ranch-style gates along gravel driveways. A cracked rail or a snapped weld means the gate flexes and the latch misses. We weld the rail on site, reinforce the weak point, and get the gate square again. The gate stays in your driveway the whole time.
Custom Welding
Some gates weren’t built for the life they live. We do custom fabrication and on-site welding for Kaufman properties: reinforcing weak frames, building brackets, extending gates, adding receiver hitches for slide gate operators, and repairing rusted or broken steel. If another shop said replace it, bring us the gate and let Hal look at it first. He’s been fixing gates since 2001 and gets genuinely annoyed when he finds sloppy work somebody left behind.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kaufman
We’re certified to service nine major gate brands, and on Kaufman jobs we work most often with FAAC, BFT, Linear, and Viking operators, along with LiftMaster and Mighty Mule. We keep common parts on the truck so a repair doesn’t turn into two trips. If your operator is grinding, stopping mid-cycle, or tripping the safety photocell for no obvious reason, we can diagnose it on site and usually fix it the same visit. Your gate operator is only as good as the gate it’s bolted to, so we check the welds, hinges, and track while we’re there.
Common Gate Parts & Welding Problems We See in Kaufman Homes
- Slide gates binding on shared driveways. When the clay heaves under the track, a slide gate’s rack and pinion gets thrown out of alignment just enough to trip the safety photocell and stop the gate mid-cycle. We see this constantly on Kaufman properties where two homes share one driveway. The fix is usually re-leveling the track and re-aligning the rack, not replacing the operator.
- Hinge posts racking 2 to 3 inches by late summer. A post that plumb-checks fine in March can be visibly leaning by August, because the black clay shrinks away from the footing during drought. The gate drags, the latch misses the strike plate, and the whole thing looks broken. It’s not the hinge. It’s the footing. We replace the post and set it deeper so the seasonal cycle stops winning.
- Gate operators failing in winter ice. North Texas ice storms bring brief hard freezes, and Kaufman operators that weren’t rated for those conditions grind gears or blow fuses during a thaw. We check the operator’s rating against local conditions and recommend units that can handle a Kaufman winter. Not every operator can.
- Gravel driveway rollers wearing unevenly. Kaufman’s caliche and gravel driveways chew up standard gate rollers fast. A worn roller puts stress on the hinge welds and the operator. We stock heavier rollers built for gravel, and we inspect the whole gate when we swap one out. A new roller on a bent bracket is money wasted.
On a ranch driveway off County Road 4055 in Kaufman, our crew found a heavy tube-steel swing gate sagging so badly it dragged a groove into the caliche. The hinge post had leaned after the clay dried and contracted, so we cut and re-welded the hinge tabs, replaced the post with a deeper concrete footing, and added a sag correction kit so the gate operator could keep working through the next wet-dry cycle. That’s the kind of job we do regularly in Kaufman.
Pricing for Gate Parts & Welding in Kaufman, TX
Kaufman gate repair pricing stays honest because we quote the price before we touch your gate. A typical hinge replacement in Kaufman runs $165 to $285, depending on the gate’s weight and whether we’re welding new tabs or adjusting existing ones. Post replacement, which usually means digging out the old footing and setting a new post in concrete, runs $340 to $650 for a standard swing gate post. Custom welding work is quoted by the job, but most small fabrication repairs on Kaufman gates land between $180 and $400. Rail repair runs $150 to $320. You get the price before work starts, and it doesn’t change at the door. We also knock $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Estimates are free.
We Also Serve Cities Near Kaufman
Our crews work throughout Kaufman County and the surrounding area. If you’re in Terrell, Forney, Seagoville, or Balch Springs, we handle gate parts and welding there too, with the same on-site repair approach and the same written 90-Day Done Right Promise. Call (877) 610-2993 and we’ll tell you when we can be there.
Serving Kaufman, TX - Our Local Coverage Area
We’re based in the Kaufman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kaufman
The sag isn’t in the hinges. It’s in the post. Kaufman sits on Blackland Prairie Houston Black clay, which shrinks away from gate post footings during summer drought. The post leans 2 to 3 inches out of square, and the gate sags with it. Tightening hinges won’t stop it because the post is the thing moving. The fix is a post replacement with a deeper, wider concrete footing that resists the seasonal shrink-swell cycle. Call (877) 610-2993 and we’ll come look at the post, not just the hinges.
Yes. We do this regularly on Kaufman’s shared driveway properties, where a swing gate won’t fit and two homes share one slide gate. We level the track, re-align the rack and pinion, and do the welding in sections so the gate can be moved and cleared if the neighbor needs through. We coordinate with both households before we start, and on most slide gate track jobs we’re done the same day. Call (877) 610-2993 and we’ll schedule around the driveway’s use.
Usually not. When Kaufman’s clay heaves under the track in dry summer conditions, a slide gate’s rack and pinion gets thrown out of alignment. The safety photocell reads the resistance and stops the gate mid-cycle. Your operator is doing its job. The gate underneath it is out of level. We re-level the track, re-align the rack, and the operator runs clean again. If the operator was damaged by running against the bind, we service that too. Call (877) 610-2993 for a free estimate.
Yes, in most cases. Standard steel rollers wear unevenly on Kaufman’s caliche and gravel driveways, and a worn roller puts stress on the hinge welds and the operator. We stock heavier rollers built for gravel surfaces and install them with the right brackets. If your gate shudders, squeals, or leaves flat spots on the rollers, it’s time to swap them before the gate frame takes damage. Call (877) 610-2993 and we’ll bring the right parts for your driveway.
Yes. We brace the gate in place, cut out the old hinge post, set a new one deeper in concrete, and weld the hinge tabs back where they belong. The gate never has to leave your property. This is the most common Kaufman repair for ranch-style gates on gravel driveways, because the post fails before the gate does. Call (877) 610-2993 for a quote, and we’ll tell you exactly what’s involved before any work starts.
Call Gatewood Fence & Gate for Gate Parts & Welding in Kaufman
If your gate is dragging, binding, leaning, or won’t stay latched, call (877) 610-2993. A live person answers, day or night. We’ll set a time, show up in a truck with Hal’s name on it, quote the price before we start, and fix the gate in your driveway instead of hauling it off. The 90-Day Done Right Promise is in writing on every job. When the name is on the shop and the shop is down the road, that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kaufman and the surrounding area since 2001.