Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Jonesborough
Gate parts and welding in Jonesborough usually come down to two things: a post that has moved, or a hinge that has finally given out after 150 years. Most jobs run $180-$640 depending on whether we’re re-setting a post, forging a period hinge, or welding a cracked rail. If your gate is binding, dragging, or refusing to latch, call (877) 610-2993 and Hal will put eyes on it. We serve all of ZIP 37659, from the brick sidewalks downtown to the gravel driveways on the county line, and we quote the price before any work starts, not after.
Why Gatewood Fence & Gate Is Jonesborough’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name goes on every invoice. That matters in a town like Jonesborough, where word travels down Main Street faster than a rumor at the Storytelling Festival. When we re-hang a wrought-iron gate on a Cherokee Street Victorian, the neighbor across the street watches the whole job from the porch. We know that. We also know the Jonesborough inspection and repair work here isn’t a quick bolt swap. It’s period hardware, custom welding, and posts that need to survive freeze-thaw cycles in clay soil.
Our crews don’t work on commission and we don’t push replacement when a repair will hold. The person who answers the phone at 2 a.m. is a real person, and the person who shows up in the driveway is the one who will stand behind the work under the 90-Day Done Right Promise, in writing, every time. Scheduling for Jonesborough jobs is coordinated from the Memphis office, but the crew serving you works locally and knows the roads.
Our Gate Parts & Welding Services in Jonesborough
Hinge Replacement
In the historic district, hinge replacement often means matching what’s already there rather than grabbing a universal bracket off the truck. We regularly source or hand-forge strap hinges compatible with original 1800s hardware so the fix doesn’t trigger a red flag with the Jonesborough Historic Zoning Commission. On newer ranch gates off Highway 81, it’s a faster job: remove the old hinge, weld or bolt the new one, and re-hang square.
Post Replacement
Most sagging gates in Jonesborough don’t have a bent panel. They have a post that froze and heaved out of plumb. Clay-heavy soil around ZIP 37659 holds water through winter, and every freeze cycle pushes the post a little further out of square. We excavate the old footing, pour a deeper base with drainage gravel, and set a reinforced post, then re-hang the gate so it actually clears the latch. Fix the post first, or you’ll fix the gate twice.
Rail Repair
Wrought-iron rails crack at the welds, especially on gates that have carried decades of swing and slam. We weld on site in the driveway, grinding back to bare metal, running a proper bead, and matching the finish so the repair doesn’t advertise itself. For old hand-forged iron in the downtown core, we match the existing joinery rather than layering modern weld over historic work.
Custom Welding
When a part simply doesn’t exist, we fabricate it. That’s common here: a hinge strap from 1850, a latch catch that no supplier has carried since before anyone reading this was born, a brace for a 16-foot farm gate. Our Gate Parts & Welding work includes on-site fabrication so your gate stays in the driveway and we can test-fit the piece against the actual opening, not a catalog drawing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jonesborough
We stock parts for FAAC, BFT, and Linear operators, which show up on a lot of solar-powered farm gate setups across the rural side of Jonesborough. When a control board fails or a keypad goes dead on a long driveway gate, waiting a week for a part isn’t a good answer. We keep common items in the truck and can order the rest fast. If you’ve got an opener from a brand not listed, call us anyway. Hal has probably worked on it.
Common Gate Parts & Welding Problems We See in Jonesborough Homes
- Post heaving from freeze-thaw cycles. Clay soil around Jonesborough absorbs water all winter. Every freeze pushes the post, and by March the gate drags or the latch won’t catch. This is the single most common call we run from January through April.
- Broken strap hinges on historic gates. Original hand-forged hinges on 1800s wrought-iron gates crack at the pivot after enough decades. Off-the-shelf replacement hinges don’t match the historic hardware and can trigger Historic Zoning Commission review. We source period-compatible parts or fabricate them.
- Low-voltage issues on solar gate operators. Long rural driveways in ZIP 37659 often run solar-powered operators because mains power isn’t practical. Winter’s short days and cloud cover starve the batteries, leading to gates that open halfway or keypads that read dead.
- Cracked rails at weld points. Older iron and steel gates crack where sections were joined decades ago. Repeated swing stress and temperature cycling finish the job. A good weld and a matching finish restores the rail without replacing the gate.
Pricing for Gate Parts & Welding in Jonesborough, TN
Here are real numbers for Jonesborough work. Hinge replacement typically runs $180-$320 per hinge depending on whether we’re matching historic hardware or installing a modern heavy-duty hinge. Post replacement ranges $380-$640 per post, which includes excavation, new concrete with drainage, and re-hanging the gate. Rail repair welding starts around $150 for a simple crack and climbs if we’re matching old ironwork or rebuilding a rotted section. Custom welding is quoted per project, usually $95-$180 per fabrication hour plus material. The price is agreed before we start, not after. Call (877) 610-2993 for a free estimate, and if you’ve got a written quote from another company, we’ll give you a free second opinion on it.
We Also Serve Cities Near Jonesborough
We run jobs to Erwin, Church Hill, Greeneville, and Morristown regularly. If you live outside Jonesborough proper but still in the surrounding county, call (877) 610-2993 and we’ll tell you when we can be there. No trip charge inside the county, and the free estimate stands wherever we roll the truck.
Serving Jonesborough, TN - Our Local Coverage Area
We’re based in the Jonesborough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Jonesborough
Not for a repair that matches the existing hardware. Welding a broken hinge back together or replacing it with a period-compatible part is considered routine maintenance. Where you’d need review is if you changed the gate’s design, swapped in modern hardware that alters the appearance, or made structural changes to the gate or posts. If your property sits in the historic district, we can help you figure out whether your repair falls under the Commission’s review before we start. Call (877) 610-2993 and ask about your specific gate.
Because the post has moved, not the panel. Jonesborough’s clay-heavy soil holds water and heaves with every freeze-thaw cycle. Over a few winters, the hinge post rocks out of plumb and the whole gate tilts with it. The fix is excavating the post, pouring a deeper footing with drainage, and re-hanging the gate square. Straightening the panel without re-setting the post means you’ll be calling again in a year. We fix the post first.
Yes, in most cases we can weld a new rack section onto the existing slide gate without replacing the whole operator. We grind back the worn section, weld a matched rack piece, and align it so the gate travels smooth. This almost always costs less than a new opener. Call (877) 610-2993 with the gate’s brand and we’ll tell you whether it’s a repair or a replacement before we schedule anything.
We can, but we’d advise against it. A modern hinge will hold, but it won’t match the gate’s original hardware, and on a property in Jonesborough’s historic district that can trigger Historic Zoning Commission review. We source period-compatible strap hinges from specialty suppliers, or Hal fabricates a match when a supplier doesn’t exist. The result looks like the gate’s original hardware and keeps you clear of the Commission. That’s why we don’t treat Jonesborough like everywhere else.
The biggest factors are post depth, drainage, and gate weight balance. In Jonesborough soil, a farm gate post needs to go below the frost line with a gravel bed under the concrete so water doesn’t sit against the footing. We also fabricate hinge-post bases and gussets that spread the load and reduce the pull on the post when the gate swings. If the gate is heavy, we’ll check the operator’s force settings and safety edges at the same time so the whole system isn’t fighting itself. Call (877) 610-2993 and we’ll come look at your exact setup.
Call Gatewood Fence & Gate for Gate Parts & Welding in Jonesborough
If your gate is sagging, cracked, or refusing to latch, call us before you push a repair out another season. We’ll give you a straight answer, an honest range, and a date we’ll show up. Phones are answered by a live person 24/7 at (877) 610-2993, and estimates are free. The name is on the shop, and the work carries the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Jonesborough since 2001.