Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Jollyville
Gate hinge replacement in Jollyville typically runs $150-$385 depending on whether the post is still sound, and most jobs are finished the same day we start. If your gate sags, binds, or won’t latch, the problem is usually in the hinge post or the hardware, not the panel itself. We’ve been fixing gates in the 78729 ZIP since before the Parmer Lane corridor filled in, and we answer the phone at (877) 610-2993 with a live person, any hour.
Jollyville is our kind of town. Unincorporated, mostly 1980s ranch homes, a few newer HOA subdivisions along the edges. That split matters when you’re dealing with gate parts and welding, because a cedar swing gate from 1987 fails differently than an aluminum automated gate from 2019. We plan for both. Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice we hand you.
Why Gatewood Fence & Gate Is Jollyville’s Preferred Gate Parts & Welding Company
We’re not a call center routing a contractor from three counties away. We’re a locally owned, owner-operated shop with a published address and license number anyone can look up. When you call about a sagging gate in the Oak Forest subdivision or a seized slide roller along Anderson Mill Road, the person who shows up is part of our crew, background-checked and uniformed, and Hal stands behind the work personally.
Our Gate Parts & Welding work in Jollyville comes with the 90-Day Done Right Promise in writing. If it’s not done right, one phone call brings us back, no runaround. That’s not an “up to” guarantee or fine print. It’s how we’ve kept a strong local reputation in a community where people talk at the hardware store and remember who actually showed up.
And we show up fast. Jollyville sits right at the Travis-Williamson County line, and our crews serve the area locally, with scheduling coordinated from our Austin office. For a hinge or post failure that’s let the gate hang into the driveway, we can usually get someone out the same day. We also offer a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Jollyville
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. On Jollyville’s 1980s-era ranch homes, we regularly find the original galvanized hinges rusted through or the lag bolts stripped out of cedar that’s been baking in Texas sun for 35 years. We replace the hinge, and when the post is soft, we address that too. Fix the hinge without the post and you’ll fix it twice.
Post Replacement
The clay-to-limestone transitional soil in Jollyville moves with Central Texas drought-and-deluge cycles. That movement torques wooden gate posts out of plumb and seizes the rollers on slide gates. We dig out the rotted post, set a new pressure-treated or galvanized steel post in proper footings, and remount the gate so it swings true. This is the most common repair we do on homes built between 1983 and 1995.
Rail Repair
When a wooden gate’s horizontal rail splits or pulls away from the pickets, the whole panel starts to droop. We repair or replace the rail, re-secure the pickets, and often reinforce the corner joints with steel brackets or a welded frame. On Jollyville gates that face west toward the Balcones Escarpment, UV damage hits the finish hard, so we match stain and paint to the original subdivision standard where an HOA is involved.
Custom Welding
We weld on site, which means your gate stays in your driveway. Whether it’s a cracked wrought-iron frame, a broken latch plate, or a decorative steel gate that needs custom fabrication to match your HOA’s architectural specs, Hal and his crew can handle it. No hauling the gate off to a shop. You get to watch the work happen where the gate hangs, and you know exactly what you’re paying for before the first weld is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jollyville
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. For Jollyville homeowners, that means we show up with the right parts on the truck instead of ordering and rescheduling. Whether you have a Viking slide gate operator, a Ghost Controls swing arm, or a DoorKing keypad entry on an HOA gate, we stock the common replacement parts and can weld or machine the less common ones. The faster we can source a part, the less time your gate is left unsecured.
Common Gate Parts & Welding Problems We See in Jollyville Homes
- Rotted hinge posts on 1980s ranch gates. The panel looks mostly fine, but the post has rotted below ground or at the hinge line. Sag correction alone fixes the panel twice; the post must be replaced. We see this constantly in Jollyville’s original cedar gate stock from the mid-1980s.
- Clay-to-limestone soil shifting post footings. After a drought year followed by heavy spring rain, the ground under Jollyville moves. Posts lean, swing gates start scraping the driveway, and slide gate rollers bind. A new post with a deeper, properly backfilled footing solves the movement problem.
- HOA architectural mismatches after a repair. Jollyville’s newer subdivision edges along the Parmer Lane corridor have HOA-controlled entry systems with strict look standards. A replaced hinge post that changes the gate’s height or finish can trigger a violation notice. We match materials and finish to the original spec so the gate clears review without a redesign.
- Worn latch and lock hardware. On 30-to-40-year-old gates, the latch may still work, but the strike plate has hogged out and the lock no longer seats. We carry replacement latch hardware and can weld custom strike plates for gates that predate standard sizes.
Pricing for Gate Parts & Welding in Jollyville, TX
Here’s what you can expect for parts and welding work in Jollyville’s market. Hinge replacement runs $150-$385 for most single swing gates, depending on hinge size and whether the post needs reinforcing. Post replacement typically runs $285-$650, including new footings and remounting the gate. Rail repair lands between $120-$300. Custom welding work is quoted by the job, but a typical cracked-frame repair or latch-plate weld runs $95-$250. A full custom steel gate fabrication generally starts around $1,200 and goes up with size, finish, and automation.
Every price is quoted and agreed before any work starts. You’ll know the number before we touch the gate. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve gotten from another company. Seniors and veterans get 10% off, permanently. Call (877) 610-2993 for an exact quote, and we’ll come measure for free.
We Also Serve Cities Near Jollyville
If you’re in Anderson Mill, Brushy Creek, Cedar Park, or Wells Branch, you’re still in our service area. Jollyville is the heart of our local route, and we run jobs across the surrounding communities same week. The same pricing, the same 90-Day Done Right Promise, and the same live person on the phone.
Serving Jollyville, TX - Our Local Coverage Area
We’re based in the Jollyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Jollyville
In most cases, a simple hinge or post replacement on private residential property does not require a permit, but Jollyville sits at the Travis-Williamson County boundary, so the answer depends on which county your parcel falls in. Because Jollyville is an unincorporated CDP, we regularly help homeowners determine whether a Travis County permit, a Williamson County permit, or no permit applies to their fence or gate project. We handle this every week, and we will tell you straight which county, if any, has jurisdiction before the work starts. Call (877) 610-2993 and we’ll help you sort it out.
Yes, if we know the standards before we fabricate. The HOA-controlled subdivisions in Jollyville, especially the newer ones along Parmer Lane, typically require prior architectural approval for gate style, height, finish, and sometimes even the type of operator. We weld to your HOA’s documented spec and can provide photos, material lists, and finish samples for your management company’s review. Bring us the guidelines and we’ll build the gate to pass the first time.
If your automatic gate doesn’t reverse when something blocks its path, or if it never had photocells installed, it needs a safety retrofit. This is more than convenience; it’s a safety requirement for any automated gate, and it becomes urgent if kids or pets are anywhere near the driveway. We service Viking, Ghost Controls, DoorKing, and Elite operators, and we can add or replace photocells, safety edges, and control boards on any of them. Call (877) 610-2993 for a free safety assessment.
Almost always, yes. A sagging gate is usually a hinge post problem, not a panel problem. We replace the rotted post, install new hardware, and reset the gate to swing true. Replacing the whole gate when only the post has failed is the kind of work we get called in to correct. Unless the panel itself is rotted through or structurally cracked, we’ll save the gate and fix the foundation.
The hinge post. Homes built between 1983 and 1995 in Jollyville’s original subdivisions almost all used cedar posts set directly in the ground. After 30 to 40 years of Central Texas heat, UV, and the drought-and-deluge soil cycle, those posts rot at or below ground level, and the gate starts dragging. We replaced a warped cedar swing gate and rotted hinge post on a 1987 ranch in the Oak Forest subdivision after the homeowner’s management company flagged it as an architectural violation. New galvanized post footings, a LiftMaster keypad entry, and a stain match to the original cedar got it through HOA review without a redesign. That’s the repair, done right the first time.
If your gate is sagging, stuck, or failing an HOA inspection, call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. We’ll come to your place in Jollyville, look at the gate, and give you a written price before any work starts. Hal Gatewood’s name is on the shop and on every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Jollyville since 2001.