Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Jeffersonville
Gate parts and welding in Jeffersonville almost always start with the same hidden problem: the hinge post, not the panel. We come out to homes from 47130 to 47144, look at the footing first, and fix the gate where it stands instead of hauling it off. Hal Gatewood has been doing this since 2001, and he still answers the phone himself. If your gate binds at the latch or the post leans after a flood crest, call (877) 610-2993 and we’ll be out to look.
Why Gatewood Fence & Gate Is Jeffersonville’s Preferred Gate Parts & Welding Company
Jeffersonville property owners keep our number for one reason: we weld on site and we stand behind the work in writing. Hal’s name is on the shop, his license number is published, and the 90-Day Done Right Promise is stamped on every invoice. Not buried in fine print. If it’s not done right, one call brings him back.
We know the tight sites here. Shared driveways off Riverside Drive, alley-loaded lots near Spring Street, pedestrian gates squeezed between brick walls where a swing gate will not fit. We have cut out rusted hinges, welded new post sleeves, and reinstalled latch hardware without closing a right-of-way to either neighbor. That’s the kind of work you learn from doing it in Jeffersonville, not from a franchise playbook.
When you call, a live person answers. Not a voicemail, not a call center three states away. And the person who shows up is background-checked, uniformed, and works for Hal directly. That matters to the homeowners between 50 and 70 who have already been burned by a national outfit that quoted one price on the phone and charged another at the door. Our price is quoted and agreed before any work starts. No surprises at the end.
Key Takeaways:
- On-site welding keeps your gate in your driveway during the repair
- 90-Day Done Right Promise in writing on every job
- Live person answers 24/7, including nights and weekends
- No trip charge inside Jeffersonville, no charge to come look
- Seniors and veterans get a permanent 10% discount
Our Gate Parts & Welding Services in Jeffersonville
Most gate failures in Jeffersonville are parts-and-welding problems, not full replacements. Here’s what we actually do, in order of how often we see it here.
Hinge Replacement
In the 47130 ZIP, flood-saturated clay heaves hinge posts out of plumb and the gate binds at the latch before the panel ever sags. We cut out the old hinge, weld in a new one at the correct angle, and realign the gate to swing true. On ornamental wrought iron gates along Spring Street, we match the existing weld pattern so the repair does not look like a patch.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In Jeffersonville’s clay-heavy lower elevations, freeze-thaw cycling works post footings loose every winter. We dig out the old footing, set a new post in concrete, and weld the gate back to it. If the post is only slightly out of plumb, we can often weld a new footing sleeve and pull the post back square without replacing the whole thing.
Rail Repair
Rails on sliding gates take the most abuse here because flood debris from the Ohio River bends and cracks them. We straighten bent rails, weld cracked sections, and replace rack-and-pinion track when silt has packed it beyond adjustment. Fix the panel without the post and you’ll fix it twice. We fix the rail and the track together so the gate rolls clean the first time.
Custom Welding
Some Jeffersonville gates cannot be repaired with stock parts. We do custom welding for ornamental ironwork, mid-century steel gates, and pedestrian gates with curved tops or decorative scrollwork. We weld on site, in your driveway, so you can watch the work happen. Hal carries a portable welder on the truck and has fabricated repair pieces for gates nobody makes replacement parts for anymore.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jeffersonville
We stock or can quickly source parts for the gate motors and openers Jeffersonville homeowners actually have: FAAC, BFT, Linear, and Viking among them. We also carry common hinge types, weld-on post brackets, roller assemblies, and latch hardware for manual gates. If you have a LiftMaster-compatible latch or a Mighty Mule opener, we service those too. No need to wait weeks for a distributor to ship. Call (877) 610-2993, tell us the brand and model, and we’ll bring what we need.
Common Gate Parts & Welding Problems We See in Jeffersonville Homes
- Flood-heaved hinge posts. After the Ohio River crests above roughly 23 feet at the Louisville gauge, the clay soil in lower Jeffersonville loses its grip on post footings. Posts cant, gates bind, and latches stop lining up. We see this in the Spring Street and Riverside Drive corridor every flood season.
- Rust through at the hinge weld. River-valley humidity rusts bare steel hinges and weld joints on ornamental gates along Spring Street within a single season. The decorative work survives, but the weld that holds the hinge to the post fails first.
- Silt-packed slide gate track. Restricted working space in shared rights of way forces slide gates, but rack-and-pinion tracks get packed with silt after every Ohio River crest. The gate still works the first week, then jams. You can clear the track, but without welding in a debris guard, it will jam again after the next flood.
- Rot at the bottom rail on wood gates. East and south of downtown, in the 1970s-to-2000s subdivisions, wood privacy gates rot fast at ground level. The Ohio River valley’s persistent ground moisture shortens the life of wood rails and hinge bolts. We weld in steel reinforcement brackets that buy years of extra life.
Pricing for Gate Parts & Welding in Jeffersonville, IN
Here’s what gate parts and welding actually cost in Jeffersonville, based on the jobs we do most often.
- Hinge replacement: $95-$220 per hinge, including welding and alignment. Ornamental iron hinges on Spring Street homes run higher because we match the existing weld pattern.
- Post replacement: $350-$750 for a standard post reset in clay soil, including concrete and site cleanup. Deeper footings for flood-prone lots run toward the higher end.
- Rail repair or straightening: $150-$400, depending on the length and whether we need to weld in a new section or replace rack-and-pinion track.
- Custom welding: $140-$500 for most repair fabrications, quoted after we see the gate. We quote and agree on price before any work starts.
Those are honest numbers for Jeffersonville’s market. The floodplain conditions here add labor because post footings sit in water-saturated clay, and that means deeper excavation and more concrete. You get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from any other company. Call (877) 610-2993 for a straight price.
We Also Serve Cities Near Jeffersonville
Our gate parts and welding service covers the communities around Jeffersonville too. We work in Oak Park, Clarksville, New Albany, and Sellersburg for homeowners who need the same on-site repair and the same 90-Day Done Right Promise. If you’re in one of those towns, the person on the phone still picks up live. Learn more about our Gate Parts & Welding service and call us at (877) 610-2993.
Serving Jeffersonville, IN - Our Local Coverage Area
We’re based in the Jeffersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Jeffersonville
We do the work from the side of the post that does not block vehicle access from either neighbor. First we excavate around the footing, then we weld a steel sleeve to brace the post and pull it back to plumb before pouring new concrete. The driveway stays passable the whole time. On a shared driveway off Riverside Drive, we replaced a canted hinge post on a wrought iron pedestrian gate after a 24-foot crest left the original footing heaved out of the clay. We cut out the rusted hinge, welded in a new post footing sleeve, and reinstalled a LiftMaster-compatible latch so both neighbors could keep using the right-of-way without swinging the gate into the alley. Call (877) 610-2993 and we’ll take a look at your specific right-of-way.
No, we almost never replace the whole gate when the hinge post rusts through. The post is the failure point, not the gate panel. We cut out the rusted section of post, weld in a new steel stub at the correct height, and reattach the existing gate. The ornamental ironwork on Spring Street homes is usually worth saving, and the existing panels were built better than anything you would buy today. Replacing the whole gate is almost never necessary.
Yes, we can add a new rack and pinion track to an existing slide gate. We weld on a new track, realign the drive gear, and add a debris guard so silt cannot pack the track after the next Ohio River crest. This is common in Jeffersonville’s flood-zone parcels where a swing gate will not fit and the slide gate takes the brunt of flood debris. Call (877) 610-2993 for a free measure and a written price.
The quickest permanent fix is to reset the hinge post with a deeper concrete footing and a welded post sleeve, rather than just shimming the hinges. Shims buy weeks. A deeper footing in Jeffersonville’s clay buys years. We can usually have a post reset same day, but we will give you a real time window when you call and we’ll be inside it.
Yes, we handle both the physical gate and the operator. After an Ohio River flood, we check the hinge posts, weld joints, and latch hardware first, then test the opener to see if water got into the motor or limit switches. If the operator is salvageable, we repair it. If it was submerged, we will quote a replacement honestly and set it up with proper water protection. One call covers the whole job. Call (877) 610-2993.
Call Hal Gatewood for Gate Parts & Welding in Jeffersonville
Your gate is broken and you need a name you can verify, not a quote that changes at the door. Hal Gatewood has been fixing gates since 2001, his address is published, his license number is public, and he will hand you his cell number. You can drive to the shop and look him in the eye. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Call (877) 610-2993 for a free estimate on any gate parts, welding, or post repair in Jeffersonville. A live person answers around the clock. No trip charge inside the county, and every quote is agreed before any work starts. If it is not done right, the 90-Day Done Right Promise means one call brings Hal back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Jeffersonville and surrounding communities since 2001.