Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Jeffersontown
Gate parts and welding in Jeffersontown means dealing with two very different animals: aging 1970s and 80s ornamental iron driveway gates in the residential neighborhoods, and high-cycle commercial slide gates running multiple shifts out in Bluegrass Commerce Park. We handle both, and we do most of the welding on site, right in your driveway or loading dock. Hal Gatewood has been fixing gates since 2001, and when you call (877) 610-2993, a live person answers. Not a recording, not a queue. A person who knows gates.
Jeffersontown’s freeze-thaw cycles are rough on steel. Posts heave, hinges seize, welds crack. We see it every spring. The good news is most of it can be fixed without ripping out the whole gate. That’s what we do: find the actual failure, fix it, stand behind it in writing. The 90-Day Done Right Promise means if it isn’t right, we come back and make it right. No fine print, no runaround.
Why Gatewood Fence & Gate Is Jeffersontown’s Preferred Gate Parts & Welding Company
We’re the company that repairs what others replace. Around Jeffersontown, a lot of gate work gets quoted as “full replacement” because it’s easier than diagnosing a hinge post or a worn roller. That isn’t how we work. Hal will tell you to fix the panel without the post and you’ll fix it twice. So we start at the post, at the hinge, at the actual point of failure. On-site welding means your gate stays in your driveway. We don’t haul it off to a shop somewhere. Hal’s name is on the shop and on every invoice, published address and license number anyone can look up. You can drive to the shop and look him in the eye.
Jeffersontown customers call us because the person who shows up is the person who stands behind the work. Background-checked, uniformed crew. Certified to service nine major gate brands. And when you call, 24/7, a live person answers. We’ve built our reputation in this part of Jefferson County one gate at a time. Our Gate Parts & Welding team handles everything from a rusted hinge weld to a full commercial operator swap.
Our Gate Parts & Welding Services in Jeffersontown
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. Jeffersontown’s ornamental iron gates from the 70s and 80s were built with lightweight barrel hinges that simply were not made for 40 years of Ohio Valley humidity. We cut out the old hinge welds, match or upgrade the hinge, and weld the new ones square so the gate swings true. A typical hinge replacement in Jeffersontown runs $180 to $420 depending on gate weight, access, and whether the post needs to be re-set at the same time. If the post has heaved, doing hinges without fixing the post is throwing money away.
Post Replacement
Concrete footings in Jeffersontown freeze and thaw all winter. Water gets into the tiniest crack, freezes, expands, and pushes the post out of plumb. By spring, the gate drags on the ground or won’t latch. We dig out the old footing, re-set the post in new concrete, and weld the hinges back square. Post replacement in Jeffersontown typically runs $350 to $800 per post depending on depth, gate size, and the condition of the surrounding concrete work. It’s the most common structural repair we do in the residential neighborhoods off Billtown Road and Taylorsville Road.
Rail Repair
Rust attacks rail seams and hinge welds first. A broken rail on a double swing gate means the gate flexes, the latch stops lining up, and every closing cycle works the break wider. We cut out the rusted section, weld in new steel, and grind it smooth so the repair disappears under primer and paint. Rail repairs in Jeffersontown usually run $150 to $400 depending on rail length and how much bad steel has to come out. If we catch it before the rail fails completely, the fix is straightforward.
Custom Welding
Some gates deserve to keep their original character. Bent pickets, cracked scrollwork, a broken latch tab, a custom mounting plate for a new opener: that’s all weld work you can’t just order from a catalog. We weld on site in Jeffersontown, repairing what’s there rather than replacing the entire gate. Custom welding jobs start around $140 for a simple repair and run up from there based on time and materials. You’ll know the price before the welder fires up, because we quote every job before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jeffersontown
We’re certified to service nine major gate brands, and around Jeffersontown we see a lot of Linear and Viking residential operators plus DoorKing commercial slide-gate systems out in the industrial parks. Older Ghost Controls boards cross our bench regularly too, especially on the 2000s-era aluminum gates in the newer planned communities. We stock common parts locally for these brands, which means faster turnaround when a control board dies or a limit switch fails. If your operator’s brand isn’t listed here, call anyway. If it opens and closes, we’ve likely worked on it.
Common Gate Parts & Welding Problems We See in Jeffersontown Homes
- Heaved hinge posts from freeze-thaw cycles. Jeffersontown sits squarely in the Ohio Valley’s ice-storm corridor, and every winter the concrete around gate posts takes abuse. Water seeps in, freezes, expands, and the post leans. We re-set and re-weld these posts every spring across the 40299 zip code.
- Rusted hinge welds and panel seams on 30-50 year old iron gates. Decades of Ohio Valley humidity get under old paint and into the weld metal itself. The gate looks fine until a seam splits, and then it doesn’t close at all. Cut-out and re-weld is the fix.
- Ice-load damage on ornamental iron swing gates. A single freezing-rain event can seize hinges solid. Then someone hits the opener and the operator burns itself out fighting ice-loaded tracks. We see bent operator brackets and snapped hinge pins after every major ice storm.
- Legacy commercial operators running past their rated cycles. Out in Bluegrass Commerce Park, original LiftMaster and Elite slide-gate operators from the late 90s are running multi-shift duty cycles they were never rated for. Motors burn out, rack and pinion gears strip, and the gate finally stops. Proactive replacement beats emergency repair every time.
Pricing for Gate Parts & Welding in Jeffersontown, KY
Here’s what Jeffersontown property owners should expect to pay, based on the work we do most often in this market:
- Hinge replacement: $180 to $420
- Post re-setting or replacement: $350 to $800 per post
- Rail repair or splice weld: $150 to $400
- Custom welding (brackets, patch, scrollwork): $140 and up
- Gate roller replacement: $120 to $300 per roller, depending on weight
- Full operator replacement on a commercial slide gate: $1,800 to $4,500 installed, depending on brand and safety upgrades
Every price is quoted and agreed before any work starts. No trip charge inside Jefferson County. And standing offers from Gate Parts & Welding in Jeffersontown that don’t require haggling: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. You’ll talk to a person, and you’ll get a straight answer on what the job should cost.
We Also Serve Cities Near Jeffersontown
If you’re just outside Jeffersontown, we’re already in your neighborhood regularly. We serve Fern Creek, Douglass Hills, Middletown, and Highview with the same on-site welding and repair-first approach. Call us at (877) 610-2993 and we’ll get you scheduled.
Serving Jeffersontown, KY - Our Local Coverage Area
We’re based in the Jeffersontown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Jeffersontown
The post is heaving from freeze-thaw cycles, and the gate is following it. Jeffersontown’s winters push concrete footings out of plumb a little more every year, and a gate that sags every spring almost always has a hinge post leaning out of level. Fix the panel without the post and you’ll fix it twice. We re-set the post footing, weld the hinges back square to the new post position, and the sag is gone. A re-set with hinge re-welding in Jeffersontown typically runs $350 to $700, and that’s the fix, not a band-aid. Call (877) 610-2993 for a free look at your post.
Most ice-storm damage can be welded. A snapped rail, a cracked picket, a broken hinge pin mount: these are all cut-out and re-weld jobs, and we do them on site in Jeffersontown so your gate never leaves the driveway. What can’t always be saved is a gate that was already rusted thin before the ice hit. If the surrounding metal is paper-thin, a patch weld won’t hold, and that’s when we’ll tell you straight that replacement is the cheaper long-term answer. We’ll show you the metal thickness, put a caliper on it right in front of you. Call (877) 610-2993 and we’ll give you an honest read.
No, not if you’re running multiple shifts through that gate. Those late-90s LiftMaster and Elite slide-gate operators out in Bluegrass Commerce Park were rated for a certain number of cycles per day, and the warehouses and distribution centers along Blankenbaker Lane routinely exceed that by two or three times. By now, the motor, the drive gear, and the limit assembly are all past their service life. Every repair buys you a few months, but the next failure usually takes out a rack and pinion gear too. A new operator rated for your actual cycle demand, installed and commissioned with current UL 325 safety edges, runs $1,800 to $4,500. It’s cheaper than three more emergency repair calls. Call (877) 610-2993 and we’ll evaluate your cycle history, not just the broken part.
Yes. If the gate has an operator on it, UL 325 entrapment protection applies, and that means photo-eyes or an equivalent non-contact sensor. A lot of Jeffersontown gates installed in the 80s and 90s never had them, or had the original safety edges disconnected by someone who didn’t know better. That’s a serious liability, and it’s a dangerous gate. We recently repaired a 30-year-old ornamental iron swing gate in a 1980s split-level subdivision off Taylorsville Road where the hinge post had heaved out of plumb after repeated freeze-thaw cycles. Our crew cut the old hinge welds, re-set the post footing with new concrete, welded on heavier-duty ball-bearing hinges, and added a safety photocell to bring the aging FAAC operator up to UL 325 entrapment standards, restoring smooth swing without replacing the entire gate. The photo-eye is not optional work; it’s the difference between a gate that’s legal and a gate that’s an accident waiting. We won’t service an operator without addressing entrapment protection. Call (877) 610-2993 if your older gate never had photo-eyes installed.
Because paint doesn’t stop weld-metal corrosion once it’s started, and Jeffersontown’s Ohio Valley humidity keeps the rust active year-round. The original 30-50 year old barrel hinges on ornamental iron gates rust from the inside out where the pin seats, and surface paint never touches that. When we replace hinges, we weld in heavier-duty ball-bearing hinges, usually sealed or greaseable, and we treat the weld zone with a rust-inhibiting primer before any finish coat. It’s a parts-quality issue as much as a weather issue. Hinge replacement with sealed bearings runs $180 to $420 in Jeffersontown. Call (877) 610-2993 and we’ll show you the difference between a barrel hinge and a bearing hinge side by side.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Jeffersontown and Jefferson County with on-site welding and gate repair since 2001.