Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hurricane
Gate parts and welding in Hurricane, WV usually means one of three things: a hinge post that has drifted with the clay, a bottom rail rusted through from standing water, or an opener from the mid-2000s that still runs but will not stop where it should. We fix all three, and we fix them in your driveway rather than hauling the gate to a shop. Hal Gatewood has been welding and rebuilding gates since 2001, and when you call (877) 610-2993, you talk to a person who knows Hurricane’s soil and what it does to a gate post. Not a voicemail. Not a call center.
If your gate sags on the latch side, scrapes the ground, or will not hold a weld, call us. We will look at it, tell you what it needs, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Hurricane’s Preferred Gate Parts & Welding Company
Hurricane sits on the old Teays Valley lake bed. That is not a geology lesson; it is the reason half the gate repairs here are not hinge swaps but post work. The clay under Putnam County swells in spring, shrinks in August, and heaves every hard freeze. A post that was plumb when set can be out by an inch and a half within three seasons. We know that because we reset those posts every year, all over Hurricane, from the older neighborhoods off Midland Trail to the newer subdivisions along Hurricane Creek Road.
Our shop does not swap parts and hope. Hal’s name is on the business, his address is published, and his Gate Parts & Welding crew answers the phone around the clock. When a Hurricane customer calls about a sagging gate on Teays Valley Road, we are not reading a script. We are picturing the soil under the hinge side and asking the right questions before we ever roll a truck. That is the difference between a company that wants your job and one that will stand behind it for 90 days in writing.
We carry parts for the brands most common across Hurricane’s housing stock, so we typically arrive with what the job needs instead of running back to a supplier. And if we cannot fix it on the first visit, we tell you that up front, before you spend anything.
Our Gate Parts & Welding Services in Hurricane
Hinge Replacement
Most hinge replacements in Hurricane are not actually hinge failures. The hinge is fine. The post it is bolted to has rotated or sunk a few degrees. We still replace the hinge when it is worn or cracked, but we check the post first because a new hinge on a heaving post is money wasted. On standard residential gates in Hurricane, a hinge replacement with post realignment typically runs $180 to $340 depending on gate weight and how far the post has moved.
Post Replacement
This is the repair we do more than any other on Gate Parts & Welding in Hurricane service calls. The old Teays clay does not just drain poorly; it moves. A post set 3 feet deep with a bag of quick-set will not hold plumb through two winters. We pull the old post, dig below the frost line, set the new post in compacted gravel and concrete, and weld or bolt the gate back true. For a typical residential swing gate post in Hurricane, budget $280 to $520 installed, with heavier farm-gate posts running more.
Rail Repair
Bottom rails on steel and aluminum gates in Hurricane rust from the ground up. The 44 inches of rain this area gets each year pools around the gate base, and freeze-thaw cycles open tiny cracks in the coating. Once water gets in, it works. We cut out the bad section, weld in new steel or aluminum matched to the gate, and reinforce the bottom rail so water has fewer places to sit. Most rail repairs on a standard driveway gate run $160 to $380, less than replacing a gate that could have had another decade in it.
Custom Welding
Sometimes the gate is not worth saving, and sometimes it is not worth replacing. When a Hurricane property has an odd opening, a custom ornamental panel, or an old farm gate with sentimental value, we weld on site. We have built reinforcement gussets, extended gate leaves, modified farm gates for solar operators, and repaired cracks that other shops said meant “new gate.” Custom welding work in Hurricane is quoted by the job, not by the hour, and you get the number before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurricane
We work on Viking, Ghost Controls, DoorKing, and Elite openers regularly across Hurricane, and we keep common hinge, roller, and bracket stock on the truck. Mid-2000s homes around Hurricane were often built with LiftMaster and Linear swing operators, and we still source parts for many of those discontinued units. If we cannot get a control board anymore, we will tell you plainly and price a replacement that works with your existing gate rather than selling you a full system you do not need.
Common Gate Parts & Welding Problems We See in Hurricane Homes
- Hinge posts drifting out of plumb: The Teays Valley clay under Hurricane swells after rain and heaves during freezes. A post that was dead level in October can bind the gate by March. We reset it properly, below the frost line, instead of shimming the hinge and pretending that fixes anything.
- Bottom rail and hinge weld corrosion: Standing water from Hurricane’s 44-inch annual rainfall plus repeated freeze-thaw cycles eats steel from the bottom up. By the time you hear it grind, the rust has usually been working a few years. We cut and weld rather than replacing whole gates.
- Mid-2000s opener failures: Homes built during Hurricane’s big growth stretch from the late 1980s through the 2000s commonly have automatic openers whose limit switches and circuit boards fail while the mechanical drive still turns. We repair and source replacement control parts where they exist, and we level with you when they do not.
- Latch-side sag on wide farm gates: Long rural gates on acreage around Hurricane Creek and the surrounding county carry more weight than a standard driveway gate. When the hinge post leans even a few degrees, a 16-foot gate drops hard on the latch side. Fixing the post and a bottom-rail gusset together solves it permanently.
Pricing for Gate Parts & Welding in Hurricane, WV
Gate parts and welding in Hurricane run $160 to $520 for most repairs, depending on the job. A hinge replacement with realignment usually lands between $180 and $340. Post replacement and resetting runs $280 to $520 for a standard residential gate. Rail repair is $160 to $380. Custom welding is quoted per job. What changes the number is gate weight, post depth, access, and whether we are repairing one component or correcting years of drift and rust at once. Every quote is written, explained, and agreed to before we start, and you will not see a second invoice at the door.
Key Takeaways
- Hurricane’s clay soil heaves posts out of plumb; post work is the most common repair here.
- Most hinge failures are post failures in disguise. We fix both.
- We weld on site and repair before recommending replacement.
- Written, upfront pricing agreed before work begins.
- 90-Day Done Right Promise, in writing, on every job.
We Also Serve Cities Near Hurricane
If your property is a few minutes east or west of Hurricane, we cover the whole stretch along I-64 and down toward the river. That includes Teays Valley, Nitro, Saint Albans, and Cross Lanes. Same local crew, same upfront pricing, same 90-Day Done Right Promise.
Serving Hurricane, WV - Our Local Coverage Area
We’re based in the Hurricane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hurricane
Your post is moving because the Teays Valley clay under Hurricane swells when it holds spring rain and the gate’s hinge post was set too shallow. A post set less than 3 feet deep, or one set in loose native clay without proper drainage, will heave a little every season. The fix is pulling the post, digging a footing below the frost line, and setting it in compacted, well-drained material. Call (877) 610-2993 for an exact quote; the estimate is free.
Usually yes, for now. Many mid-2000s LiftMaster residential swing-gate openers around Hurricane still have limit switches, capacitors, and control parts we can source. When the control board is discontinued and gone from supply channels, we tell you that directly and price a modern opener matched to your existing gate. Call (877) 610-2993 and describe what the opener is doing; we will know in the first call whether parts are still available.
We check the panel angle, clean the cells, test the battery bank under load, and clear the track of debris and ice dams that stall the gate. Long slide tracks on Hurricane acreage collect leaves and silt from fall rains, and a low battery in freezing weather mimics a dead motor. Call (877) 610-2993 and we will pull the readings and tell you exactly which component is failing before you replace anything.
If the gate was installed after the UL 325 standard took effect and the safety edges and photo eyes are working, it is safe by design. The concern in Hurricane is older mid-2000s installations where the safety edges were never replaced after weathering, or where the opener is still running on a failing control board. We test the entrapment protections on every automatic gate we touch and will not send you away with a gate that closes on unknown force. Call (877) 610-2993 to schedule the check with your next repair; we flag safety issues as part of the site visit.
If the posts are still plumb and the panel is straight, a hinge replacement is usually enough, and that runs $180 to $340 in Hurricane. If the post has shifted, the panel has twisted, or the bottom rail is cracked, welding comes into the picture. The quick test is whether the gap between the gate and the post at the hinge side is the same top to bottom. If it is not, the problem is the post, not the hinge. Call (877) 610-2993 and we will tell you over the phone what you are probably dealing with.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hurricane since 2001.