Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Horn Lake
If your gate drags the driveway every fall or the hinges have been loose since the last ice storm, you’re not alone. A large share of gates in Horn Lake were installed during the 1990s and 2000s subdivision boom, and those builder-grade posts and hinges are failing all at once in DeSoto County clay. Gatewood Fence & Gate handles Gate Installation - Horn Lake, hinge replacement, post replacement, rail repair, and custom welding across Horn Lake, including all of 38637, and we do the welding on site so your gate stays in your driveway. Call Hal at (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Horn Lake’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001 and he still runs the shop himself. The name is on the shop, and the shop is down the road. That is the oldest accountability there is. Horn Lake homeowners call us because they want to see the same face at the hardware store that showed up to fix their gate, and because Hal’s crew welds on site instead of hauling your gate off to some shop across the county line. Every job, including a simple hinge replacement or a cracked rail weld, carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We coordinate scheduling from our Memphis office and run crews into Horn Lake regularly, so response time is measured in hours for most repair calls, not days. And because we live in the same Mid-South climate and know the same subdivisions, we already know what’s wrong with your gate before we pull into the driveway. Horn Lake specifically, with its clay-heavy soil and 1990s-era post footings, has a signature failure pattern that we see week after week.
Our Gate Parts & Welding Services in Horn Lake
This is the work that keeps Horn Lake gates opening and closing cleanly. We focus on repair before replacement, which means we fix the post, the hinge, or the rail that actually failed rather than selling you a whole new gate assembly. Here’s what that looks like on the ground:
Hinge Replacement
Horn Lake’s 1990s-era ornamental iron gates usually have two welded barrel hinges at the post. After two decades of freeze-thaw cycling and clay heave, those hinges bind, sag, or crack at the weld. We cut the old hinge off, grind the post clean, weld a new hinge in place, and re-hang the gate with proper clearance. A typical hinge replacement in Horn Lake runs $180 to $420 depending on gate weight and whether the post itself needs work. Fix the hinge without checking the post and you’ll fix it twice.
Post Replacement
This is the signature Horn Lake job. In the Dorsett Woods subdivision, an original ornamental swing gate from the late 1990s had dragged the brick-paver driveway by fall after years of ice-storm cycles. Our crew found the hinge post wobbling in a 24-inch footing that never accounted for clay heave, extracted it, augered a deeper post footing, welded new LiftMaster-compatible hinge brackets, and re-hung the gate with sag correction. It clears by three inches now and holds alignment through freeze-thaw. Post replacement in Horn Lake typically runs $350 to $900, depending on depth, concrete work, and whether the gate leaf needs straightening at the same time.
Rail Repair
Weld fatigue from Memphis-area ice loading cracks ornamental iron at the hinge post and along the top rail, and the humid summers rust the bottom rail where it meets the latch. We cut out the cracked section, fishplate or sleeve the rail with matched steel, and weld it in place with the gate still hanging. A cracked rail repair in Horn Lake runs $150 to $350 per section. In some cases, after multiple seasonal cracks on a 30-year-old gate, replacing the entire leaf is the cheaper answer, and we’ll tell you that plainly instead of patching you along.
Custom Welding
Some Horn Lake gates were built with non-standard geometry, and off-the-shelf parts simply don’t fit. Custom welding covers everything from reinforcing a sagging gate leaf to fabricating a new latch plate, extending a gate to close a gap, or adding a section when a fence line shifts. Hal welds on site, in your driveway, and rate for custom welding in Horn Lake starts at $125 per hour plus materials, with a clear written quote before any arc is struck. The price you approve is the price you pay. No adjustments at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Horn Lake
We’re certified to service nine major gate brands, and in Horn Lake we see a steady stream of Horn Lake Gate Motor & Opener units from FAAC, BFT, and Linear that were installed in the early 2000s. Those original control boards die quietly, often after an ice storm browns the board. We keep common parts for FAAC and Linear operators on the truck when we’re headed to a Horn Lake job from our Memphis office, which means fewer second trips and faster repairs. For BFT units with dead boards, we can usually source the replacement within a day or two and install it on the same trip across the state line. If you’re not sure what brand your operator is, call (877) 610-2993 and describe the cover plate. Hal can usually identify it over the phone.
Common Gate Parts & Welding Problems We See in Horn Lake Homes
- Builder-grade hinge posts set shallow to dodge DeSoto clay. A gate that clears in May gouges the driveway by October. Re-hanging without a deeper post footing fails within one season, which is why we check the post first on every Horn Lake hinge job.
- 1990s control boards and loop detectors that run until an ice storm browns the board. Then the part can’t be sourced and the gate sits manually shoved for months. We can often retrofit a modern, UL 325-compliant board onto an older operator at a fraction of full replacement cost.
- Weld fatigue from ice loading plus summer rust. Horn Lake sits in the Mid-South humid subtropical zone. Ice storms snap ornamental iron at the hinge post, and the long humid summers rust the rail and latch so the gate binds and the keypad entry won’t register a closing cycle.
- Photoelectric eyes and safety edges aging out. Many Horn Lake gates installed before 2000 lack the entrapment protection that UL 325 now requires. If your gate reverses unexpectedly or won’t auto-close, the loop detector or safety circuit has usually failed, not the motor.
Pricing for Gate Parts & Welding in Horn Lake, MS
Straight numbers, because you deserve to know before you call. Hinge replacement in Horn Lake runs $180 to $420. Post replacement runs $350 to $900 depending on footing depth and concrete work. Rail repair runs $150 to $350 per cracked section. Custom welding starts at $125 per hour plus materials. A full post reset with hinge replacement and sag correction on a typical 1990s ornamental gate in Horn Lake lands between $500 and $1,100. The price is quoted and agreed in writing before any work starts. There is no trip charge inside the county, and we offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number before we ever leave the office.
We Also Serve Cities Near Horn Lake
Our crews work across DeSoto County and into neighboring areas. When we’re not welding in Horn Lake, we’re running hinge and post jobs in Southaven, Hernando, and Olive Branch. If your gate is failing and you’re in any of those areas, we can usually schedule within the same week. For everything from a cracked rail to a full Gate Parts & Welding job, one call to (877) 610-2993 gets Hal on the line.
Serving Horn Lake, MS - Our Local Coverage Area
We’re based in the Horn Lake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Horn Lake
DeSoto County’s expansive clay swells when wet and shrinks when dry, and most 1990s-era Horn Lake gate posts were set in 24-inch footings that never accounted for that movement. The post heaves up and out of plumb through freeze-thaw cycles each winter, so the gate leaf drops and drags. Re-hanging the gate without resetting the post deeper just means you’ll fix it again next season. The permanent repair is extracting the post, augering a deeper footing below the active clay zone, and re-setting it in concrete with the gate re-hung to proper clearance. Call (877) 610-2993 and we’ll tell you what your specific post needs after we look at it.
In most Horn Lake cases, yes. A 1990s ornamental gate usually has a sound steel frame and hinges that can be salvaged or replaced. What it lacks is the safety circuit: photoelectric eyes, a reversing edge, and a compliant control board. We can retrofit a modern, UL 325-compliant board and safety sensors onto many older FAAC, BFT, and Linear operators for roughly $350 to $650 in parts and labor. Full replacement of gate and operator together typically runs $2,500 to $5,500 in Horn Lake. If the steel is cracked in multiple places and the post footings are shot, replacement is the smarter money, and we’ll tell you that straight. Call (877) 610-2993 for an honest assessment.
Horn Lake sits in the same ice-storm corridor as Southaven, so the failure mode is similar: ice loads the top rail and the gate leaf flexes at the hinge post, cracking the weld over time. The difference in Horn Lake is what’s underneath. Southaven is built on a more stable loess ridge, while Horn Lake subdivisions sit directly on expansive clay varves that heave seasonally. So an ice-storm crack that would be a simple weld repair in Southaven often becomes a post reset plus weld repair in Horn Lake because the post shifted in the same storm cycle. That combination is why our Gate Parts & Welding team checks the footing on every Horn Lake weld call.
Usually yes, or the loop detector needs recalibration. If your gate opens on command but sits open until you press the button again, the closing loop or the auto-close safety circuit has failed. A failed Gate Access Control in Horn Lake loop detector typically costs $180 to $300 to replace, and we can often do it without replacing the operator. Sometimes the issue is a misaligned photoelectric eye instead, and that’s a $90 to $150 fix. We’ll diagnose it on site before we quote anything. Call (877) 610-2993 to schedule a look.
If the crack is isolated to one section of the rail and the rest of the gate is straight, welding is the better call. A single rail section welded and reinforced in Horn Lake runs $150 to $350. If the gate has three or more crack sites, visible rust through the bottom rail, and the hinge post is leaning, then replacing the leaf typically costs $800 to $1,800 and will last decades longer than repeated patching. We’ll show you the gate, point out every crack, and give you both numbers before you decide. Hal would rather you spend the right amount once than the wrong amount three times.
Your gate is the first line of security for your driveway and your backyard. When it fails, you need it fixed now. Gatewood Fence & Gate has been locally owned and owner-operated since 2001, with a published address, a license number you can look up, and Hal’s name on every invoice. A live person answers (877) 610-2993 around the clock, and the 90-Day Done Right Promise is stamped in writing on your estimate. If it’s not done right, Hal comes back and makes it right. Call today and get a free estimate before you’re stuck shoving a gate by hand for another month.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Horn Lake since 2001.