Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Henderson
Gate parts and welding in Henderson usually means one of three things: a hinge or post that’s failing, a panel or rail that needs repair, or a custom fabrication job no off-the-shelf part will solve. Most Henderson work we do runs $220 to $480 for hinge replacement, $600 to $1,400 for a rebuilt post, and $350 to $900 for rail repair or welding, with custom fabrication quoted after we see the gate. The catch in Henderson is that the HOA file often dictates the spec, not the homeowner. If you’re in Green Valley, Anthem, Seven Hills, or Inspirada and your gate is sagging, binding, or noisy, call (877) 610-2993 and we’ll get you a straight answer, not a sales pitch.
Why Gatewood Fence & Gate Is Henderson’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and the name is still on the door, the invoices, and the work. We’re not a franchise operation with a rotating cast of techs; the crew that shows up to your Henderson home is background-checked, uniformed, and answerable to Hal directly. When a Henderson customer calls with a problem we’ve seen on a hundred other gates in their exact neighborhood, we already know what to bring and what to expect before we pull into the driveway.
Henderson has kept us busy for years because the housing stock here wears differently than Las Vegas. The masonry pilasters on 1990s tract homes in Green Valley, the heavier custom gates up in Seven Hills and Lake Las Vegas, the HOA-mandated panel matches, the caliche dust in every track July through September. We know these streets because we work them every week. That local knowledge means we quote honestly the first time, show up in the window we promised, and stand behind the job with a written 90-Day Done Right Promise. If it’s not done right, one call brings us back. No runaround.
Our Gate Parts & Welding Services in Henderson
Hinge Replacement
Hinges on Henderson swing gates take a beating, and the failure is rarely the hinge barrel itself. It’s the anchor point. In most Henderson communities built between 1990 and 2015, hinge plates are lagged into hollow block pilasters that crack after 20 to 30 years of thermal cycling. Replacing the hinge means addressing the block too, or you’ll be back in the same spot next season. A typical hinge replacement in Henderson runs $220 to $480 per hinge, including reinforcing the block and re-aligning the gate to hang true.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. Henderson’s clay soil and summer heat wreak havoc on plumb posts, especially slide gates whose weight sits on a single post. We dig out the old footing, pour a new one sized for the gate’s actual weight, and set the replacement post before reinstalling hardware. $600 to $1,400 is the honest range depending on gate weight, access, and whether the post is an ornamental column or a standard steel tube.
Rail Repair
Top and bottom rails on Henderson’s wrought iron swing gates take the brunt of wind load, especially during monsoon gusts and the dry northern winds that funnel down from McCullough Range. Cracks at the picket joints, rusted-through bottom rails holding water after rare heavy storms. We cut out the bad section, weld in new steel, and match the finish. $350 to $900 covers most residential rail repairs in Henderson, with powder coat color match included where the HOA requires it.
Custom Welding
Henderson has a lot of custom iron and steel gates, particularly in Seven Hills, Lake Las Vegas, and the elevated lots around Anthem. When a gate breaks that was fabricated for that specific driveway in 1997, you can’t swap in a stock panel and walk away. We weld on site, at your house, whether it’s a cracked decorative scroll, a gate that needs to be widened for a golf cart, or a custom reinforcement plate for a failing post. Custom welding quotes in Henderson start around $350 and go up from there based on materials and time, always quoted and agreed before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Henderson
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, which covers most of what Henderson’s HOAs specified back when these communities were built. When you’ve got a 1998 Viking swing operator that needs a board or a DoorKing slide operator that’s finally quit, we can usually get the part locally or from our regular suppliers within a day or two. The operator brand matters less than you’d think. What matters more is whether the hardware around it is actually failing, which is the part most out-of-town outfits miss.
Common Gate Parts & Welding Problems We See in Henderson Homes
- Hinge posts anchored in hollow block pilasters. These crack and spall after two or three decades of Henderson’s heat cycling, causing sag that shimming won’t fix. The correction is a rebuilt post, not a bigger hinge.
- Monsoon dust packing into slide tracks and photocell housings. Fine caliche particulate accumulates every July through September, triggering phantom reversals. Homeowners bring us in thinking the operator is dead when the real fix is a thorough track and sensor cleaning.
- Original 1990s operators hitting end of life simultaneously. LiftMaster, Linear, and Eagle units installed during the Green Valley and Anthem build-out are failing in the same window. HOA approval and matching specs usually slow the process, so plan a few weeks ahead when you can.
- Custom ornamental iron that no stock part matches. Picket spacing, scroll patterns, powder coat colors. Henderson HOAs hold the line on appearance, which means custom fabrication is often the only path, not the upsell path.
Pricing for Gate Parts & Welding in Henderson, NV
Henderson gates run a little higher than bare-bones Las Vegas repairs because the materials and the standards are different. A hinge replacement on a standard 30-inch wrought iron swing gate runs $220 to $480; a heavy custom gate with ornamental work can push past $600. Post replacement runs $600 to $1,400 depending on gate weight and footing access. Rail repair lands at $350 to $900. Custom fabrication work starts around $350 for small welds and goes up based on design and steel. The HOA factor adds cost in one specific way: matching a discontinued powder coat color or replicating decades-old picket spacing often involves a custom order and a second trip. We’ll tell you that on the first visit, not after the panel is off. Every quote is written, agreed, and signed before any work begins. Call (877) 610-2993 for a free estimate on your Henderson gate.
We Also Serve Cities Near Henderson
Our service area covers Henderson and the surrounding communities, including Boulder City, Whitney, Paradise, and Enterprise. If your gate needs attention and you’re anywhere in the southeast Las Vegas Valley, our Gate Parts & Welding crew can get to you. We schedule routing around Gate Parts & Welding in Henderson calls every week, so your appointment fits into a route we’re already running.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Henderson
Because the HOA’s architectural guidelines specify the exact powder coat color, picket spacing, and profile that were approved when your community was built, and those specs are often no longer standard stock. In Green Valley ZIPs like 89014 and 89015, we routinely see covenants that demand matching a color that hasn’t been stocked in 20 years. That means a custom fabrication order and a second trip to install it. We handle the whole process, including the paperwork your HOA wants to see before work starts. Call (877) 610-2993 and we’ll walk through what your specific community requires.
Usually not. In Henderson, the more common culprit is caliche dust from monsoon storms packing into the track and blocking the safety photocells, which triggers phantom reversals. We check and clean the track and sensors before we condemn an operator, because swapping a good board for a bad diagnostic is a waste of your money. If the operator is actually failing, we’ll show you the specific component and quote the repair before anything is ordered. Call (877) 610-2993 for a diagnostic that starts with the cheap possibilities.
It depends on your community. Many Henderson HOAs treat a post replacement as a structural modification that requires architectural review, especially when the post is a masonry pilaster or an ornamental column. If the post is a like-for-like steel replacement with no visible change, most HOAs consider it maintenance and don’t require a filing. We’ll tell you honestly which category you’re in, and if you need approval, we’ll help with the documentation. Call (877) 610-2993 and we’ll sort it out before we dig.
Yes. We do it on a regular basis for Lake Las Vegas, Seven Hills, and the custom home communities around Anthem. We take measurements and reference photos on the first visit, then fabricate the replacement section or full panel in our shop to match the original scroll work, picket profile, and finish. The result won’t look like a patch; it’ll look like the gate you had in 2003. Call (877) 610-2993 for a free measure and quote.
Usually, yes. A gate sags in the hinge post, not in the middle. If your panel is straight but the latch side is dragging, the post has moved or the footing has failed. Shimming the hinges is a temporary fix that masks the problem and makes the rebound worse. In Henderson’s clay soil, the fix is to pull the old footing, pour a new one to proper depth, and set the post plumb again. We’ll tell you if the post is truly done or if there’s a cheaper correction that will hold. Call (877) 610-2993 and we’ll look at it before you spend a dollar.
Call Gatewood Fence & Gate for Gate Parts & Welding in Henderson
If your Henderson gate is failing, sagging, or just noisy, call (877) 610-2993. A live person answers, not a voicemail. We’ll talk through what you’re seeing, give you a straight range over the phone, and book a time that fits your schedule. Written quotes before any work starts, the 90-Day Done Right Promise in writing, and Hal’s name on the shop. You can drive down and look us in the eye, or we’ll come to you. Either way, you’ll get the gate fixed right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Henderson since 2001.