Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Heath
Gate Installation - Heath projects usually start with one of three things: a hinge that has seized from lake air, a post that has shifted in saturated ground, or a custom weld job on an ornamental estate gate. We handle all three from the first call to the final weld. Hal Gatewood has run Gatewood Fence & Gate since 2001, and he still shows up to look at the gate himself. If you need someone out to a property in Heath today, call (877) 610-2993 and a live person answers, any hour.
Our full Gate Parts & Welding team works on Heath properties every week. We know which subdivisions have the heavy wrought-iron swing gates, which HOA entrances run loop detectors with older keypads, and which lakeside lots eat hinges faster than anywhere else in Rockwall County. That local familiarity means we show up with the right steel, the right welding gear, and a realistic answer instead of a guess.
Why Gatewood Fence & Gate Is Heath’s Preferred Gate Parts & Welding Company
Most gate companies in the DFW metro want to unbolt your damaged gate, haul it to a shop, and bolt on a new section. We don’t work that way. Hal welds on site in your driveway, which means you watch the repair happen and you know exactly what got fixed. The 90-Day Done Right Promise is written on every invoice. If the repair doesn’t hold, one call brings him back, no runaround.
Heath homeowners tell us the same thing over and over: they want a real person who answers the phone and a company whose name they can verify. Hal Gatewood’s name is on the shop. The address is published. The license number is public record. You can also drive to the shop and look him in the eye before you ever sign anything. That is the oldest accountability there is, and it still works.
We serve Heath with live-answer phone service 24 hours a day, 7 days a week. No voicemail tree, no call center three states away. When you call about a sagging gate on Smirl Drive or a dead operator in a gated community off Horizon Road, the person who picks up knows the area. We can typically schedule a Heath call within one business day, and storm-season emergency calls get priority routing.
Our Gate Parts & Welding Services in Heath
Hinge Replacement
Hinge replacement on Heath gates is the single most common job we do, and the lake is the reason. The salt-laden breeze off Lake Ray Hubbard settles on ferrous hinge barrels and pins, and within a year or two the grease is gone and the steel is pitting. A typical hinge replacement on a standard residential swing gate in Heath runs $180-$320 per hinge, including labor and on-site welding. On heavy ornamental gates with custom strap hinges, figure $350-$600 per hinge because the old hinge plates often need to be cut off and new ones welded on true.
Post Replacement
Post replacement in Heath is a different animal than inland DFW work. The lakefront clay holds water through spring and early summer, and a fence post set in 2010 may have spent fifteen years sitting in a hole that never fully dried. We dig out the old footing, reset a new galvanized or powder-coated steel post below frost line, and weld the gate back square. A standard residential post replacement in Heath runs $450-$900 per post. If the post carries a heavy automated gate and the footing needs to be oversized, expect $900-$1,400.
Rail Repair
Wind load from spring squalls is the quiet killer of welded gate rails. When a solid infill gate catches a 60 mph gust off open water, the rail takes stress it was never designed for, and cracks start at the weld. We repair rails by grinding out the cracked weld, straightening the member, and re-welding with proper penetration. Rail repair in Heath typically costs $150-$400 per cracked joint, depending on whether the gate needs to come off its hinges for jigging.
Custom Welding
Heath has more custom ornamental iron per mile than nearly any small city in Rockwall County. When a scroll breaks, a picket snaps at the base, or a homeowner wants a matching section built for a new driveway, we weld it on site to match the existing profile. Custom welding in Heath starts around $120 for a simple picket repair and runs $500-$1,800+ for an ornamental scroll or finial rebuild that has to match an existing estate pattern. Hal will tell you honestly whether a piece can be repaired or whether fabricating new is cheaper than chasing rust.
Gate Rollers
Slide gates on Heath’s larger estate lots roll on steel or nylon wheels inside a track, and lake humidity finds every bearing. When a roller seizes, the gate jerks and eventually stalls. We replace rollers and adjust the track so the gate moves cleanly. Roller replacement in Heath generally runs $95-$225 per roller, and we always check the rack and pinion while we’re under the gate.
Latch & Lock
A gate latch that won’t engage is a security problem, not a nuisance. On Heath properties with automated gates, a failed latch also confuses the operator’s travel limits and can burn out a motor. We replace mechanical latches, magnetic locks, and strike plates on residential and HOA gates. Basic latch replacement runs $85-$200. A magnetic lock on an access-controlled community gate runs $300-$650 with wiring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Heath
Heath Gate Motor & Opener systems come in a mix of brands, and we service all the major ones you’ll find in local subdivisions and on lakeside estates. That includes Viking, Ghost Controls, DoorKing, Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common parts stocked for Heath calls: hinge plates, roller sets, backup batteries, photocells, and limit switches. That means fewer second trips and a faster fix when your operator is down and the gate won’t open.
Certified across nine major brands, we can diagnose a Ghost Controls arm operator on a lake-view estate and swap a DoorKing loop detector at a gated Heath HOA entrance without calling in a specialist. That capability matters here, because many Heath communities combine ornamental ironwork with Gate Access Control in Heath systems that generic fence crews won’t touch.
Common Gate Parts & Welding Problems We See in Heath Homes
- Seized hinges on lakeside lots. The salt-laden breeze off Lake Ray Hubbard oxidizes ferrous gate hardware up to twice as fast as gates five miles inland in Rockwall. We replace hinge pins and barrels on exposed lakeside properties almost annually.
- Leaning posts after spring storms. Wind load bends solid infill gate frames and pulls hinge posts out of plumb, especially on elevated lots with soft clay soils. By the time a latch stops engaging, the post has usually been moving for months.
- Dead backup batteries after power cuts. Thunderstorm outages hit Heath, and many gate operators run on battery backup. The problem is that lake-air humidity sulfates those batteries early, so when the power drops, the gate stays locked with no manual release available.
- Jerky slide gates with phantom obstructions. Humidity corrodes the safety photocell housings and rack teeth on slide gates, which makes the operator think something is in the way. The gate stops halfway and refuses to move until the photocell or rack is replaced.
Pricing for Gate Parts & Welding in Heath, TX
Here’s what you should expect to pay for gate work in Heath. Hinge replacement runs $180-$600 per hinge depending on gate weight and whether it’s a simple strap hinge or a custom ornamental hinge. Post replacement runs $450-$1,400 per post. Rail repair runs $150-$400 per joint. Roller replacement runs $95-$225 per roller. Latch and lock work runs $85-$650. Custom welding starts around $120 and goes up based on fabrication time.
Every price is quoted and agreed before we touch the gate. What Hal tells you on the phone or in the driveway is what you pay, period. The free estimate is exactly that: free, written, and good for the job as described. We also give $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and get an exact number for your gate.
We Also Serve Cities Near Heath
Our Gate Parts & Welding in Heath service area extends to the communities around Lake Ray Hubbard and into eastern Rockwall County. If you’re in Rockwall, Fate, Royse City, or Rowlett and have a gate that needs welding or new parts, the same live-answer phone line, same upfront pricing, and same 90-Day Done Right Promise apply. We run calls through those cities every week.
Serving Heath, TX - Our Local Coverage Area
We’re based in the Heath area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Heath
Heath sits directly on the eastern shore of Lake Ray Hubbard, and the breeze coming off the water carries salt and moisture that settles on exposed gate hardware. That microclimate corrodes hinge barrels and pins roughly twice as fast as gates only five miles inland in Rockwall. The fix is bronze or sealed-bearing hinges that resist the oxidation, and we stock those for Heath jobs. Call (877) 610-2993 and we’ll tell you whether your current hinges can be rebuilt or need replacement.
Yes. A solid infill gate on an elevated Heath lot acts like a sail during spring squalls, and a 60 mph gust off open water can bow a rail or pull a post out of plumb before the operator’s wind-load rating has anything to say about it. We repair and reinforce storm-damaged gates every spring. If yours is bent, call and get a free estimate before the metal work-hardens and gets harder to straighten.
Every automated gate has a manual release, usually a keyed lock or lever on the operator housing. If the battery is dead, that release lets you push the gate by hand until power returns. The important part is to test the manual release during good weather; a release that has never been cycled will be stiff or seized exactly when you need it. If your operator’s release won’t budge, call (877) 610-2993 and we’ll free it up or replace the release mechanism.
The most common cause on Heath slide gates is a corroded rack and pinion set or a dirty, pitted safety photocell housing. Humidity from the lake leaves rust on rack teeth, and the operator reads the resistance as an obstruction and stops. We replace the rack sections and adjust the photocells, which usually eliminates the jerk-and-stop behavior entirely. A slide gate rack repair in Heath runs $150-$400 per section.
If the post is leaning, the footing has shifted, and welding the gate to compensate won’t last; the post has to be reset. We excavate the old footing, repour with proper drainage so water stops pooling at the base, and reset the post below frost line before re-hanging the gate. A new post reset in Heath’s saturated lakefront clay runs $450-$900. The gate itself usually only needs welding if the movement cracked a rail or hinge plate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Heath since 2001.