Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Gunbarrel
Gate welding and hinge replacement in Gunbarrel typically runs $185-$480 for repairs and $900-$3,200 for full post-and-frame rebuilds, with most weld jobs quoted and completed the same week. We work on the gates that were installed when Gunbarrel was built out in the 1960s through 1980s, which means we see the same rust-through, wind-shear, and sag problems on nearly every call. If your gate is leaning, scraping, or hanging by one hinge, call us at (877) 610-2993 and describe what you’re seeing. Hal Gatewood’s crew will show up in the window we give you, and you’ll know the price before any metal gets cut.
Why Gatewood Fence & Gate Is Gunbarrel’s Preferred Gate Parts & Welding Company
Most of the gate work we do in Gunbarrel happens on HOA-governed properties, which means two approval tracks before we even strike an arc. Boulder County Community Planning & Permitting has jurisdiction here because Gunbarrel is unincorporated county land, not Boulder city. On top of that, many condo and townhome associations require their architectural committee to sign off on any gate material or style change. We’ve walked that path hundreds of times, and we know which forms to pull and which HOA boards want a site visit before they approve. Out-of-area crews routinely skip one track or the other, and the homeowner finds out at project closeout.
Hal Gatewood has been owner-operated since 2001, and his name is on the shop and every invoice. Calls are answered by a live person 24/7, not a voicemail tree. The 90-Day Done Right Promise is stamped in writing on every job: if something isn’t right, one call brings us back, no runaround. For Gunbarrel homeowners who’ve been quoted one price and charged another at the door, that’s the difference that matters.
Our Gate Parts & Welding team carries common hinge straps, post caps, heavy barrel hinges, and weld-in gate frame stock on the truck, so a sag correction or hinge re-weld at a Gunbarrel condo entrance doesn’t wait on a parts order. When you call about a gate dragging on the concrete at the entrance to your complex, we show up ready to cut, jig, and weld, not to write an estimate and leave.
Our Gate Parts & Welding Services in Gunbarrel
Hinge Replacement
Gunbarrel’s exposure to chinook wind gusts, regularly 60-80 mph in winter and spring, means hinge welds take a beating that sheltered lots never see. A wide swing gate acts like a sail, and every gust torques the hinge strap until the weld fatigues and cracks. We remove the damaged hinge, grind the post clean, and weld a new strap in place while the gate stays in your driveway. If the post has rotated or the gate has sagged, we address that before the new hinge goes on. Fix the panel without the post and you’ll fix it twice.
Post Replacement
In Gunbarrel, the bigger problem is rarely the gate panel; it’s what’s holding it up. Original 1960s-1980s ornamental metal gates at shared HOA entrances have hinge posts rusted through at the base from decades of snowmelt and irrigation overspray sitting against the steel. A sag correction on a 45-year-old gate often reveals a post that’s paper-thin below grade. We saw this at an HOA complex in Gunbarrel’s core recently: a 1980s ornamental swing gate had sheared its lower hinge weld during a spring gust, and the post itself was rotten with rust. Our crew removed the gate, jigged the hinge post for plumb, re-welded the hinge strap, and set the post in a new concrete footing. The HOA had already cleared the work through their architectural committee and Boulder County permitting, so there was no stop-work surprise.
Rail Repair
When a wind gust racks a wide farm-style swing gate, the rails bend and the pickets stay straight, which pulls the gate out of square and binds it against the latch post. We straighten or section-replace bent rails on ornamental and tubular steel gates across Gunbarrel, then re-weld pickets and re-square the frame. On gates that have been racked more than once, we often add a diagonal tension rod or a mid-rail brace so the next chinook doesn’t do the same damage again.
Custom Welding
Not every Gunbarrel gate needs a part from a catalog. We weld custom hinge plates, receiver brackets for gate operators, gate stops, and latch keeps on site. For older community entrances with odd post spacing or 40-year-old gate frames that predate modern operator mounting patterns, custom fabrication beats a stack of adapters every time. We weld in the driveway, not in a shop two counties away, so you see the fit and finish while it’s happening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gunbarrel
We’re certified to service nine major gate brands, and in Gunbarrel we most often see Viking, Ghost Controls, and FAAC operators on residential and HOA entrances. DoorKing and LiftMaster show up on higher-traffic community gates. We don’t swap brands just to move inventory. If your existing operator works and the frame is sound, we repair and re-weld what’s there, replace only what’s failed, and give you a 90-Day Done Right Promise on the whole job. For Gunbarrel customers who need a new operator on an older gate, we match the part to the gate’s weight and span rather than selling whatever’s on the truck.
Common Gate Parts & Welding Problems We See in Gunbarrel Homes
- Hinge welds sheared by chinook winds. The flat, open Boulder Valley floor leaves Gunbarrel fully exposed to downslope gusts. Wide swing gates catch that wind and twist until the lower hinge weld cracks. The gate suddenly drops and scrapes the concrete approach.
- Rusted-through hinge posts on original 1960s-1980s gates. Snowmelt and irrigation overspray sit against post bases season after season. The post looks fine above ground and is nearly gone below it. That’s why sag corrections here so often include post replacement.
- Racked frames on wide farm-style and acreage gates. Long, heavy gates on open lots flex under repeated wind load. Rails bend, pickets stay straight, and the gate binds against the latch post. Diagonal bracing or mid-rail reinforcement is often the permanent fix.
- Undersized solar operators on rural entrances. Grid power isn’t always available at Gunbarrel acreage entrances, and a solar kit sized for a suburban driveway gate stalls mid-travel on a 14-foot farm gate. The panel and battery bank have to match the gate’s weight and daily cycle count.
Pricing for Gate Parts & Welding in Gunbarrel, CO
A hinge replacement on a standard swing gate in Gunbarrel typically runs $185-$340 per hinge, including grinding, weld prep, and welding. A full post replacement with new concrete footing runs $450-$900 per post depending on depth and whether we’re setting steel or wood. Rail repair and frame straightening runs $220-$480. Custom welding for operator brackets, gate stops, or latch keeps is $95-$180 per fabrication. A full rebuild of a 12-foot ornamental swing gate, including both posts, hinges, and re-welded frame, runs $1,800-$3,200 at Gunbarrel HOA properties. The price is quoted and agreed before any work starts, and we offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Gunbarrel
While this page focuses on gate parts and welding for Gunbarrel, our crews work regularly in Boulder, Louisville, Lafayette, and Erie. If you’re a few minutes outside the 80301 ZIP and need a gate that’s been sagging since the last wind event, Gate Parts & Welding in Gunbarrel covers the surrounding communities too. Call us and we’ll tell you straight whether your job is in our normal route or needs scheduling.
Serving Gunbarrel, CO - Our Local Coverage Area
We’re based in the Gunbarrel area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Gunbarrel
Re-welding a hinge strap onto an existing post is general maintenance and doesn’t require a Boulder County permit. Replacing the post, however, means new concrete and a structural change to the gate, and that typically falls under Boulder County Community Planning & Permitting. Many Gunbarrel HOAs also require architectural committee sign-off before post work starts. We handle both tracks and tell you upfront which applies to your job. Call (877) 610-2993 and we’ll tell you what your specific gate needs before anything gets scheduled.
That’s a sheared hinge weld, and it’s the most common call we get after a spring chinook event in Gunbarrel. The gate acts as a wind sail, and decades of repeated gust loading fatigue the steel until the weld fails without warning. The lower hinge usually goes first because it carries the gate’s weight. We can usually re-weld the hinge same week and check the post for hidden rust while we’re there. Call (877) 610-2993 and describe the gate; we’ll give you a realistic repair window before we even arrive.
Solar is the right call for most rural Gunbarrel entrances, but the panel and battery bank have to be sized to the gate’s weight, width, and daily cycle count. A 10-foot lightweight residential gate and a 16-foot heavy farm gate need very different systems. We install solar operators from Viking, Ghost Controls, and FAAC, and we size the array for Gunbarrel’s winter sun angle and the wind load on the gate itself. An undersized solar kit is the number one reason rural gate openers stall mid-travel. Call (877) 610-2993 and we’ll spec it correctly the first time.
If the post is plumb and the surrounding steel is sound, we replace only the hinge and re-weld it in place. If the post has rotated or rusted at the base, which is common on 40-year-old Gunbarrel gates, a hinge-only fix will sag again within a season. Show me the gate closing on its own and I’ll show you where it’s failing. We’ll tell you honestly whether you need a hinge only or a hinge plus post work, and the price is agreed before we start. Call (877) 610-2993 and we’ll schedule a look.
Gunbarrel is unincorporated Boulder County, so gate and fence repairs fall under county permitting rules, not Boulder municipal code. Boulder city has its own review process; Gunbarrel goes through Boulder County Community Planning & Permitting. Many Gunbarrel properties also have an HOA architectural review layer, so a job that seems straightforward can have two approval tracks. We know which applies because we work Gunbarrel entrances every week. A crew that mostly works inside Boulder city limits can miss that distinction and stall your job at closeout. Call (877) 610-2993 and we’ll tell you exactly which track your gate needs.
Call Gatewood Fence & Gate for Gate Parts & Welding in Gunbarrel
If your gate is sagging, dragging, or hanging by a single hinge, call (877) 610-2993. Hal Gatewood or one of his crew will answer, ask what you’re seeing, and give you a straight answer about what it’ll take to fix. The estimate is free, the price is set before work starts, and every job carries the 90-Day Done Right Promise in writing. We’re happy to give you a free second opinion on any written estimate you’ve already received, and there’s no trip charge inside the county. For Gunbarrel gates specifically, we know which county forms and HOA approvals your job needs so there are no surprises at the end.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gunbarrel since 2001.