Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Grosse Pointe Park
Gate parts and welding in Grosse Pointe Park usually means one of two things: a hinge or post that’s finally given out after decades of Lake St. Clair humidity, or an operator that predates modern safety code and is now throwing faults. We handle both, and we do it on site, in your driveway, without hauling a century-old iron gate off to some shop across town. If your gate is sagging, seized, rusted through at a weld line, or the operator won’t close, call us at (877) 610-2993 and Hal or his crew will come look at it, quote the job before any work starts, and usually have it fixed same day.
We work in Grosse Pointe Park often enough to know the streets, the soil, and what 1930s ironwork looks like when it fails. That matters here more than almost anywhere else in Wayne County, because the gates on Windmill Pointe Drive and the surrounding blocks weren’t picked out of a catalog. They were fabricated by Detroit ironworks when those brick estates went up, and they don’t take kindly to off-the-shelf fixes.
Why Gatewood Fence & Gate Is Grosse Pointe Park’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and the name is still on the shop and every invoice. That’s a different kind of accountability than you get from a national outfit. When we quote a gate repair in Grosse Pointe Park, the difference won’t surprise you at the door. We write the number down before work begins, and that’s the number.
Our Gate Parts & Welding team has a strong local reputation among Grosse Pointe Park homeowners for one reason above all: we repair what others want to replace. A national chain will look at a frost-heaved pilaster on Windmill Pointe and tell you the whole gate needs to come out. We’ll cut out the cracked mortar, tuck-point the column, sleeve the hinge post, and re-hang the original ironwork so it disappears back into the brick the way it’s sat since 1938.
Every job carries the 90-Day Done Right Promise in writing. Not “up to” 90 days, not “in most cases.” If it’s not done right, Hal comes back and makes it right. One call. No runaround. And when you call, a live person answers. Not a voicemail, not a call center three states away. That matters when your gate is stuck open at 10 p.m. and the dog is eyeing the street.
Our Gate Parts & Welding Services in Grosse Pointe Park
Hinge Replacement
Hinges on the older wrought iron gates around Grosse Pointe Park fail in a particular way: the top hinge tears loose from a brick pilaster that’s been heaving with the freeze-thaw cycle all winter. By spring, the gate sags a few inches and binds against the latch post. We replace the hinge, sleeve the post if the bolt holes are wallowed out, and re-anchor everything into sound masonry. In Grosse Pointe Park, hinge work is rarely just a hinge.
Post Replacement
Gate posts in the clay-rich lakeside soil near Windmill Pointe Drive sit in ground that swells and heaves every spring. A post that was plumb in November can be leaning by March, and the gate with it. We pull the old post, address the footing, and set the new one so it stays. When the post was anchored in an original 1930s brick column, we rebuild and tuck-point the masonry too so the repair matches the rest of the estate rather than looking bolted on.
Rail Repair
Wrought iron bottom rails on 1920s gates rust through at the weld line, especially within about a half mile of the lake where sustained humidity works on the metal all year. The rail looks fine until winter ice loads it and it snaps. We cut out the rotted section, weld in a matched piece, and grind it smooth. If the rail is too far gone, we reproduce it rather than telling you to swap the entire gate for an aluminum panel.
Custom Welding
Most of our Grosse Pointe Park work involves some form of on-site welding. A broken scroll, a cracked stile, a gate leaf that needs to be lengthened or re-pitched, an operator bracket for a retrofit, a custom latch strike plate. We weld in the driveway with mobile equipment, which means your gate never leaves your property and you can watch the repair happen. Hal got into this trade fixing things with a welder, and 24 years later that’s still where he starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grosse Pointe Park
We service FAAC, BFT, Linear, and Viking gate operators, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts in the truck when we head to Grosse Pointe Park so we’re not making you wait on a parts order from somewhere in Texas. For older Viking and BFT boards that are discontinued, we have a network of suppliers who rebuild, so a dead 1990s operator doesn’t automatically mean a $3,000 replacement you didn’t plan for.
Common Gate Parts & Welding Problems We See in Grosse Pointe Park Homes
- Hinge posts heaving in spring: The clay soil along Windmill Pointe Drive and the lakefront swells with freeze-thaw cycles, and a hinge post that moves an inch is enough to make the gate sag and bind. This is the most common seasonal call we get in Grosse Pointe Park, and it’s almost always fixable without replacing the gate.
- Bottom rail rust-through: Lake St. Clair humidity sits on the lower weld line of 1920s-era wrought iron rails and eats through them over decades. The rail can look intact from the street and snap under the first heavy ice load of winter.
- Obsolete operator faults: Many Grosse Pointe Park gates still run on 1990s-era operators that predate UL 325 entrapment standards. Aged photo-eyes and missing edge sensors throw faults exactly when homeowners start the gate remotely on freezing mornings.
- Cracked hinge bosses in masonry columns: Original gates were often hung from pins set into brick pilasters. Frost heave cracks the mortar around the hinge pin, and the whole gate starts to lean. Fixing just the hinge without addressing the column means you’ll be calling us again next spring.
Pricing for Gate Parts & Welding in Grosse Pointe Park, MI
| Service | Typical Price in Grosse Pointe Park |
|---|---|
| Hinge replacement (single hinge, no post work) | $180 - $340 |
| Hinge replacement with post sleeving | $300 - $520 |
| Post replacement (including footing work) | $450 - $900 |
| Rail weld repair (cut out rusted section, weld matched piece) | $220 - $480 |
| Custom welding (brackets, scrollwork, crack repair) | $150 - $600 depending on scope |
| Full pilaster rebuild with tuck-pointing and hinge re-anchor | $700 - $1,400 |
A hinge swap on a gate in Grosse Pointe Park typically runs $180 to $340. A post replacement with concrete work lands between $450 and $900 depending on soil conditions and whether masonry needs rebuilding. Custom welding work is priced at an hourly shop rate plus material, and Hal walks the job with you before any cutting starts. Estimates are free, and we’ll honor the quote in writing. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number you can plan around.
We Also Serve Cities Near Grosse Pointe Park
We work up and down the lakefront and the inland suburbs. If you’re in Grosse Pointe, Harper Woods, Grosse Pointe Farms, or Grosse Pointe Woods, we’re already in the neighborhood. You can see all the details on our Grosse Pointe Park service page. Same crew, same phone, same approach: fix the gate you have before we ever talk about replacing it.
Serving Grosse Pointe Park, MI - Our Local Coverage Area
We’re based in the Grosse Pointe Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Grosse Pointe Park
Yes, and that’s the default on almost every job we do in Grosse Pointe Park. We match the ironwork, from the scroll profile to the finish, so the repair reads as original. We’ve tuck-pointed pilasters, sleeved hinge posts with custom steel plate, and re-hung 1930s swing gates so the only way you’d know work was done is that the gate finally closes square again. Call (877) 610-2993 and Hal can look at photos or come out to assess what’s needed.
It can be. Loop detector faults on older operators in Grosse Pointe Park are often caused by the detection loop wire in the driveway cracking as the clay soil shifts through freeze-thaw cycles near the lake. The loop breaks continuity and the board throws a fault even though the gate itself is fine. We can test the loop, splice or replace the wire, and often keep your old operator running rather than selling you a new one. Call (877) 610-2993 for a free diagnostic look.
The clay-heavy soils along Windmill Pointe Drive heave a lot through winter freeze-thaw cycles, and the hinge post moves with it. A post that shifts just an inch changes the gate’s swing arc enough to cause visible sag and binding at the latch. The fix is re-anchoring or replacing the post, not just adjusting the hinges, and doing it once properly. Call (877) 610-2993 and we’ll tell you exactly what’s moving and what it’ll cost to hold it still.
No. UL 325 entrapment protection requirements apply regardless of the gate’s age, and that’s true everywhere including Grosse Pointe Park. An original 1930s gate with a modern operator still needs functioning photo-eyes and contact edges. The good news is we can retrofit safety sensors onto old iron gates without changing their look, so you keep the century-old gate and meet current code. Call (877) 610-2993 for an honest evaluation of what your setup needs.
Sometimes yes, sometimes no. If the brick column is sound and only the steel post inside is cracked, we can sleeve or replace the post and leave the masonry alone. If the brick itself is cracked from frost heave, the honest answer is that the column needs to be rebuilt or the same failure will recur. We’ve done both on Grosse Pointe Park driveways, and we’ll tell you which one applies before any work begins. Call (877) 610-2993 for a look and a straight answer.
Call Gatewood Fence & Gate for Gate Parts & Welding in Grosse Pointe Park
If your gate sags, binds, won’t close, or the operator is throwing faults it didn’t throw last year, call us at (877) 610-2993. A live person answers, day or night. We’ll schedule a time, show up when we say we will, give you a written quote before any work starts, and stand behind the job with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grosse Pointe Park since 2001.