Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Gresham
Gate parts and welding in Gresham comes down to one thing: matching the fix to what the wind and rain actually do to a gate out here. We’re talking about hinge posts that heave out of plumb, wooden frames that rack in the first strong Gorge blow, and welds that crack open after a hard freeze. Hal Gatewood has been fixing those exact problems since 2001, and he does the welding on site, in your driveway, so the gate stays where it belongs. If you’re in 97030 or 97080 and your gate is binding, sagging, or just plain done, call (877) 610-2993 and a live person picks up. Day or night.
Why Gatewood Fence & Gate Is Gresham’s Preferred Gate Parts & Welding Company
We’re not a dispatch board with a rotating cast. Hal’s name is on the shop, his address is published, and the crew that shows up is background-checked and uniformed. Gresham homeowners tell us the same thing: they already tried the phone quote from a big outfit and got burned at the door. That doesn’t happen here. The price we quote is the price you pay, agreed before any work starts. And every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We answer the phone around the clock. Not a voicemail, not a chatbot, not a call center three states away. When a gate drops in the middle of the night and your driveway won’t close, the person who answers actually knows what a hinge post is.
Our Gate Parts & Welding Services in Gresham
Hinge Replacement
On a Gresham acreage gate, the hinge is where the whole problem starts. Wind off the Gorge racks the frame back and forth until hinge screws wallow out their holes and the leaf starts to drag. We don’t just swap hardware. We check the post behind the hinge, because in Gresham that post is usually the real culprit. If it’s sound, we weld or bolt on heavier hinges and re-hang the gate square. If it’s not sound, you get an honest answer before we touch a hinge.
Post Replacement
This is the job Gresham needs more than almost anywhere else in the metro. Your gate post sits in soil that gets soaked by Cascade foothill rainfall, then heaves through freeze/thaw cycles all winter. The post leans. The gate sags. Tightening hinges just moves the problem around. We dig out the old footing, set a new post in concrete below frost line, and re-hang the gate so it swings like it did when it was new. On 97080 acreage properties, this often means re-plumbing a post that’s drifted inches out of vertical over twenty years.
Rail Repair
Wooden gate frames in Gresham don’t die fast, they die slow. Moisture gets into the rail ends, the wood softens, and the next windstorm finishes the job. We cut out the rotted section, weld or bolt in new rails, and match the existing frame so the gate looks right from the street. On wide farm gates, we’ll add a welded steel brace across the back to stop the next racking cycle before it starts.
Custom Welding
Some gates shouldn’t be patched, they should be built for this climate. We do custom welding on site, in your driveway. Steel frames, angle bracing, gate stops, latch plates, whatever the gate actually needs. Hal welds it himself. If a previous repair left booger welds or a crooked patch plate, he gets genuinely annoyed, and he’ll tell you what he’d do differently. Then he does it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gresham
We’re certified to service nine major gate brands, and around Gresham we see a lot of DoorKing, Linear, and Viking operators on the older acreage properties. Ghost Controls shows up on newer solar installs where running mains power to the gate just doesn’t make sense. We keep common parts for all of them on the truck, so when we diagnose a bad limit switch or a worn gear, the fix usually happens the same visit. If you’ve got an opener we don’t stock parts for, we tell you on the phone before you pay a dime.
Common Gate Parts & Welding Problems We See in Gresham Homes
- Wind-racked wooden frames. East-facing acreage entrances take the first hit of Gorge wind, and hinge screws pull loose every season until the frame is braced or the post is replaced. We see this constantly on Orient Drive and the semi-rural stretches of 97080.
- Posts rotted at ground level. Cascade foothill rain keeps the soil wet longer than anywhere west of here. The post looks fine from six feet up, but at ground level it’s soft enough to push a screwdriver through. That’s why sag correction in Gresham usually means post replacement first.
- Hard-freeze hardware seizures. When Gresham gets a hard freeze, iron hinges and latches bind. Cheap welds crack. Come late winter, we get calls for gates that won’t latch or won’t swing at all, and the cause traces back to that freeze cycle.
- Operator strain from shifted posts. An automatic opener will burn itself out trying to push a gate that’s binding because the post moved. The motor isn’t the problem. The post is. We fix the post first, then recalibrate the operator.
Pricing for Gate Parts & Welding in Gresham, OR
A hinge replacement on a standard single swing gate in Gresham typically runs $180 to $340, depending on the size of the gate and whether the post behind it needs work. Post replacement is the bigger job: $450 to $900 for a single gate post dug out, re-footed in concrete, and re-hung, with wide acreage gates running higher. Custom welding jobs start around $150 for a small bracket or brace and go up from there based on steel and time. Rail repair usually lands between $200 and $500. Every price is quoted and agreed before any work starts. We don’t show up with a lowball and hand you a different number at the end.
And the offers are standing, not haggled: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate and we’ll give you a number you can count on.
We Also Serve Cities Near Gresham
Our Gate Parts & Welding crew works all over east Multnomah County. If you’re in Troutdale, Fairview, Damascus, or Happy Valley, the same crew, same pricing, and same 90-Day Done Right Promise apply. We’re based out of the Portland metro and schedule Gresham work every week. Call and ask when we’re in your area next.
Serving Gresham, OR - Our Local Coverage Area
We’re based in the Gresham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Gresham
Because the post isn’t leaning from loose hinges, it’s leaning from the ground underneath it. Gresham gets more rain than Portland, and the soil goes through wet/dry and freeze/thaw cycles all winter. The footing shifts, the post lists, and tightening the hinge just pulls the gate further out of square. The fix is to dig out the old footing and re-set the post below frost line. Call (877) 610-2993 and we’ll tell you if your post actually needs it.
Yes. We install solar-equipped operators on 97080 acreage properties all the time, usually with Ghost Controls or LiftMaster hardware. The panel size depends on gate weight, cycles per day, and winter sun exposure. We’ll size it honestly so it works in a rainy Gresham winter, not just a sunny July. Estimates are free.
The post moves. Gorge wind racks the frame, Cascade foothill rain soaks the post footing, and freeze cycles shift it a little more each year. The gate sags because the post leans, and the only permanent fix is re-plumbing the post and often adding a welded brace to stop the racking. We see this pattern on nearly every older Gresham acreage gate we’re called to.
Yes, and if it doesn’t have working photo eyes and a reversing mechanism, don’t wait. A gate that can’t detect a person, a child, or a dog is dangerous. We service and install entrapment protection on every automatic operator we touch. If you’re not sure whether yours is up to current safety standards, call (877) 610-2993 and we’ll check it.
You re-plumb the posts first and brace the frame second. On wide gates, the span is long enough that a quarter-inch of post movement becomes a two-inch sag at the latch. We set posts in deeper footings below frost line and weld steel bracing across the frame so the gate moves as one unit instead of twisting. That’s the difference between a gate that lasts and one we see again in two years.
If your gate is binding, sagging, or dropping in Gresham, call (877) 610-2993 now. You’ll get a real person on the phone, a straight answer, and a free estimate with a price that doesn’t move after we arrive.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gresham and east Multnomah County since 2001.