Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Greenwood
If you’re searching for gate parts and welding in Greenwood, here’s the straight answer: hinge replacement typically runs $145-$320, post replacement with concrete work runs $380-$750, and custom on-site welding runs $95-$185 per hour depending on material and access. Most repairs in Greenwood are done the same week, not the same month. We’re Hal Gatewood’s crew, and we’ve been fixing gates in Johnson County since 2001. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Greenwood isn’t a town where you can swap a hinge and call it done. In a lot of neighborhoods along US-31 and I-65, the HOA has a say in what hardware goes on your gate. A black hinge isn’t interchangeable with a bronze one, not when the board is looking at photos. We know that because we’ve been through the approval process more times than we can count. This is local work, and it needs a local shop.
Why Gatewood Fence & Gate Is Greenwood’s Preferred Gate Parts & Welding Company
We’re not a franchise and we don’t run a call center. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone who wants to look it up. That matters in Greenwood, where a gate repair often involves a management company, a board member, and a homeowner who all want to know who showed up. The person who shows up is background-checked, uniformed, and works for the man whose name is on the invoice.
Greenwood homeowners call us because we answer the phone 24 hours a day, 7 days a week. Not a recording. A person. When your driveway gate won’t close after an ice storm at 9 p.m., you don’t want a chatbot. You want someone who knows what a frozen latch on an aluminum gate sounds like. That’s us.
We also stand behind the work with the 90-Day Done Right Promise, in writing, on every job. If something isn’t right, one call brings us back. No runaround, no fine print. Greenwood customers have been relying on that promise for years.
Our Gate Parts & Welding team works throughout Greenwood, from the neighborhoods off County Line Road to the subdivisions south of Smith Valley Road and everything between. We stock common hinge sizes, roller assemblies, and latch hardware locally, so most parts replacements don’t wait on a shipment.
Our Gate Parts & Welding Services in Greenwood
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. In Greenwood, hinge failures hit two ways: the hinge itself wears out from years of freeze-thaw cycling and ice loading, or the post it’s lagged into starts moving in Johnson County clay. We replace hinges with matching finish and weight rating, and we check the post while we’re at it. A new hinge on a moving post fixes nothing. Typical hinge replacement in Greenwood runs $145-$320 including hardware and labor.
Post Replacement
Johnson County’s clay-heavy soil is hard on gate posts. Shallow-set posts with poor backfill heave and tilt through every freeze-thaw cycle, and by the third or fourth cycle the gate binds. We dig out the old post, set the new one deeper with proper concrete and gravel drainage, and weld the hinge fixture where needed. In Greenwood’s HOA subdivisions, we document the original post material, finish, and placement before we start so the replacement matches. Post replacement with concrete work typically runs $380-$750 depending on post size and access.
Rail Repair
Rails on ornamental aluminum and iron gates fail at the welds, especially where the pickets meet the bottom rail. Ice storms load those joints with extra weight, and years of freeze-thaw flexing cracks them. We cut out the damaged section, weld in a matching rail segment, and refinish to match the existing powder coat. If the rail is bowed beyond repair, we fabricate a replacement on site. Rail repair for Greenwood gates typically runs $175-$420 depending on length and damage.
Custom Welding
Not every gate part comes off a shelf. When a spear-top picket is missing, a hinge bracket is obsolete, or a gate needs a custom opening for a new operator arm, we weld it in the driveway. We don’t haul your gate to a shop three counties over. The work happens at your Greenwood home, where you can watch it happen. Custom welding runs $95-$185 per hour plus materials, and you’ll get a written quote before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenwood
We’re certified to service nine major gate brands, and in Greenwood we see a lot of Linear and Viking operators on older subdivided lots, Ghost Controls on newer DIY-installed gates, and DoorKing on the neighborhood entry systems along the busier corridors. We keep common parts for these brands in stock, which means shorter waits when an operator board fails or a limit switch gives out. If your Greenwood gate runs one of these brands and it’s acting up, we can usually diagnose it in one visit.
Common Gate Parts & Welding Problems We See in Greenwood Homes
- Heaved hinge posts from Johnson County clay: Freeze-thaw cycling pushes shallow-set posts up and over, binding swing gates and stressing hinge welds. We set posts deeper with proper drainage so they stop moving.
- Ice-storm damage to latches and hinges: Greenwood sits in Indiana’s ice-storm belt, and freezing rain loads every exposed piece of hardware. Gates left partially open during a storm take the worst of it, and that’s when latch striker bars bend and hinge pins shear.
- HOA mismatched hardware rejections: A bronze hinge on a black gate can fail board inspection, forcing a second trip and another fee. We photograph and catalog existing hardware before touching anything so the replacement matches the CC&R spec.
- Rail weld fatigue on aging ornamental gates: Greenwood’s housing boom from the late 1990s through the 2000s put thousands of ornamental aluminum gates in the ground. Those welds are now reaching the end of their fatigue life, often within the same year across an entire subdivision.
Pricing for Gate Parts & Welding in Greenwood, IN
Here’s what you can expect to pay for gate parts and welding in Greenwood. Hinge replacement runs $145-$320. Post replacement with concrete work runs $380-$750. Rail repair runs $175-$420. Custom welding runs $95-$185 per hour plus materials. Latch and lock replacement runs $90-$210. Gate roller replacement runs $80-$160 per roller. These are Greenwood market numbers, not national averages. The price is quoted and agreed before any work starts, and it doesn’t change at the door. We offer a free estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll put numbers on paper.
| Service | Typical Range |
|---|---|
| Hinge Replacement | $145 - $320 |
| Post Replacement (with concrete) | $380 - $750 |
| Rail Repair | $175 - $420 |
| Custom Welding (per hour) | $95 - $185 |
| Latch & Lock Replacement | $90 - $210 |
| Gate Roller Replacement | $80 - $160 per roller |
We Also Serve Cities Near Greenwood
We run crews from Greenwood into the surrounding Johnson County communities every week. If you’re in New Whiteland, Beech Grove, Bargersville, or Franklin, the same crew, the same pricing, and the same 90-Day Done Right Promise apply. You’re close enough that the trip doesn’t cost you a thing inside the county.
Serving Greenwood, IN - Our Local Coverage Area
We’re based in the Greenwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greenwood
Yes, in many Greenwood HOA subdivisions governed by CC&Rs, any change to visible hardware finish or style requires board approval, even something as small as a hinge. If your original hinges are black powder coat and the replacement is bronze, the board can reject it and you’ll pay for a second trip. We photograph and catalog existing hardware before any work begins, submit the documentation to your management company if needed, and only install matching-spec parts. Call (877) 610-2993 and we’ll tell you what your specific HOA requires.
The clay-heavy soils across Johnson County expand and contract so dramatically through freeze-thaw cycles that shallow-set posts get pushed out of plumb within two or three winters. If the post was set in the 1990s or 2000s with minimal concrete and no gravel drainage, it’s almost guaranteed to move. We dig out the old footing, set the post deeper with proper drainage, and re-hang the gate. Post replacement in Greenwood runs $380-$750. Call (877) 610-2993 for a free estimate.
Yes. We weld replacement spear-top pickets on site to match the original spacing, height, and finish. We photographed and cataloged a sagging ornamental aluminum gate in a Greenwood HOA off County Line Road where the hinge post had heaved, welded a reinforced footing to match the original black powder coat and spear-top spacing, and submitted photos to the management company before final inspection. The board approved it the same day. Custom welding runs $95-$185 per hour plus materials. Call (877) 610-2993 to get a written quote.
After an ice storm in Greenwood, it’s usually one of three things: a frozen latch that won’t seat, a photo-eye or safety edge caked with ice that keeps tripping, or an operator limit switch that slipped when the gate iced over mid-cycle. We check all three in one visit, and we don’t guess. If a part needs replacing, we tell you the exact price before we touch it. Call (877) 610-2993 and we’ll be out the same day if it’s urgent.
We handle the paperwork. We photograph the existing hardware before work, document the replacement spec, and submit the documentation to your management company or board contact before final inspection. If the CC&Rs require a specific finish or style, we match it. We’ve done this enough times in Greenwood’s HOA subdivisions that we know what boards ask for, and we send it before they ask. Call (877) 610-2993 and we’ll coordinate the whole thing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greenwood since 2001.
Need someone who will actually show up and fix it right? Call (877) 610-2993 for a free estimate. We answer around the clock, and the name on the shop is the name on the work.