Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Greensburg
If your gate drags on the latch side every spring or the hinges have seized up after a Greensburg winter, the problem is usually in the post, not the panel. We weld on site, reset posts the right way, and keep your gate swinging true through the freeze-thaw cycles that make this corner of Westmoreland County rough on iron and steel. Gatewood Fence & Gate has been owner-operated since 2001, and every job carries our 90-Day Done Right Promise in writing. Call (877) 610-2993 and you’ll get a live person, any hour of the day.
Why Gatewood Fence & Gate Is Greensburg’s Preferred Gate Parts & Welding Company
The name on the shop is Hal Gatewood’s, and the shop is down the road, not across the country. When you call about a sagging gate on a lot near Lynch Field or a seized hinge on a Victorian-era iron gate off Maple Avenue, you’re talking to someone who knows exactly what Greensburg’s elevation and weather do to metal. We have been at this since 2001, and our address and license number are published for anyone to look up. You can drive to the shop and look us in the eye.
We answer every call with a live person, 24/7. Not a voicemail, not a chatbot, not a call center three states away. When a gate fails on a Friday evening and you can’t get your car out of the driveway, you need a real answer. Greensburg homeowners tell us the same thing: the national outfits quote one number on the phone and a different one at the door. We won’t. The price we quote is the price you pay, and it’s agreed before any work starts.
Our crew welds on site, so your gate never leaves your driveway. We repair what other companies want to replace, and we stand behind it with a 90-Day Done Right Promise, stamped in writing on every job. If it’s not done right, one call brings us back. No runaround.
We also offer a free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Those offers are standing. You don’t have to haggle for them.
Our Gate Parts & Welding Services in Greensburg
Hinge Replacement
On Greensburg’s older Victorian and early-20th century homes, we frequently see ornamental iron gates with hinges that have rust-jacked their barrels. Ice melt seeps in, freezes, expands, and the hinge seizes while the operator strains against it. We cut off the old hinge, weld on a heavier plate, and set the gate so it swings clean without binding. A gate sags in the hinge post, not in the middle, and that’s where we start.
Post Replacement
This is the single most common repair we handle in the 15601, 15605, and 15606 ZIP codes. Greensburg sits at roughly 1,050 feet in the Chestnut Ridge foothills, which means heavier snowfall and more freeze-thaw cycles than the Pittsburgh valley floor 30 miles west. Posts set in shallow or non-reinforced concrete footings heave on the downhill side first. The gate that closed perfectly in summer drags or binds every spring. We reset posts on helical piers, not simple concrete repours, so they stay put through the long shoulder season that defines this area.
Rail Repair
Heavy tubular-steel rails on older Greensburg gates crack at the weld points when frost heave twists the frame. Fix the panel without the post and you’ll fix it twice. We cut out the cracked section, weld in new steel, and straighten the frame before it goes back on its hinges. The repair holds because we address the post movement that caused the crack in the first place.
Custom Welding
Some fixes aren’t in a catalog. A farm gate with a broken rack and pinion, a latch that doesn’t match any modern pattern, a hinge that has to be built from scratch to match a 1920s iron gate. We fabricate and weld on site, in your driveway, using the right steel for the job. If you want a custom gate built or a vintage gate restored rather than replaced, Hal will look at it and tell you straight what it needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greensburg
We’re certified to service nine major gate brands, and we keep parts on the truck for the ones Greensburg homeowners actually run: Viking, Ghost Controls, DoorKing, and Elite among them. That matters when a swing gate operator fails on a cold morning and you need it running the same day. Our Gate Parts & Welding team welds on site, so we’re not hauling your gate to a shop and leaving you without driveway access for a week. If we have the part, we fix it on the spot. If we need to order it, we tell you exactly when it will arrive and what it will cost before we touch anything.
Common Gate Parts & Welding Problems We See in Greensburg Homes
- Downhill-side post heave. Swing gates on sloped lots drag or bind every spring because the downhill post has leaned out of plumb. It’s often misdiagnosed as hinge wear. It’s not. It’s frost heave in shallow footings, and the fix is a helical pier reset.
- Rust-jacked hinge barrels on Victorian-era iron gates. Ice melt gets into the hinge barrel, freezes, expands, and seizes the joint. The gate is frozen in place while the operator strains and burns out. We replace the hinges and free the gate before the motor cooks itself.
- Rack and pinion failures on long driveways. Greensburg’s rural edges have long drives with wide farm gates. An underpowered operator fighting snow load and wind chews up rack and pinion teeth. We weld in new rack sections and match the operator to the gate span, not the other way around.
- Loop detector ghosts after the ground thaws. Your loop detector works, but the gate still creeps or reverses after the frost leaves the ground. That’s usually post heave shifting the gate’s geometry just enough to confuse the limit settings. We reset the posts, re-level the gate, and the detector behaves again.
Pricing for Gate Parts & Welding in Greensburg, PA
Here’s what you should expect to pay in Greensburg, straight up. Hinge replacement on a standard residential gate typically runs $225 to $450, depending on the weight of the gate and whether we need to weld new plates. A single post reset starts around $350 and goes up from there if we’re using a helical pier, which we recommend on Greensburg’s sloped lots. Rail repair and welding work usually lands between $180 and $500, depending on how much steel we’re replacing. A full custom weld job, like a new farm gate frame or a rack and pinion rebuild, runs $600 to $1,800.
Those are real numbers for this market, not phone estimates that change at the door. The price we quote is the price you pay, and it’s agreed before any work starts. No trip charge inside the county. Call (877) 610-2993 for an exact quote on your gate. Estimates are free.
We Also Serve Cities Near Greensburg
We work throughout Westmoreland County and into the surrounding communities, including Jeannette, Murrysville, Monroeville, and White Oak. If you’re outside Greensburg proper, call (877) 610-2993 and we’ll tell you straight whether we can get to you without a trip charge. Most of these towns are a short drive, and we schedule around your day, not ours.
Serving Greensburg, PA - Our Local Coverage Area
We’re based in the Greensburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greensburg
Your downhill hinge post has likely heaved out of plumb over the winter. Greensburg sits at roughly 1,050 feet elevation in the Chestnut Ridge foothills, so we get more freeze-thaw cycles than the Pittsburgh valley floor, and shallow concrete footings heave on the downhill side first. The gate that latched cleanly in October drags in April because the post has moved, not because the hinges wore out. We reset the post on a helical pier and the drag goes away for good. Call (877) 610-2993 and we’ll confirm it on site. Show you the lean, show you the fix, and quote it before we start.
Yes. We weld new rack sections onto wide farm gates regularly, and we match the pinion and operator to the actual span and weight of the gate. Solar power doesn’t change the welding, but it does change the operator spec. An underpowered solar operator on a wide gate chews up rack teeth fast, especially in snow load. We’ll check the operator’s output against the gate’s span and tell you if the motor needs to be upsized. Call (877) 610-2993 for a free estimate.
We carry common hinge plates, post sleeves, and weld stock on the truck, including parts for LiftMaster and FAAC operators. Victorian-era iron gates usually need a custom hinge plate fabricated and welded on site, because the original hinge patterns don’t match anything modern. We weld in your driveway, so the fix happens the same visit. Call (877) 610-2993 and we’ll tell you over the phone what we’re bringing.
Almost always, yes. When the ground thaws and the downhill post settles or moves, the gate’s geometry shifts just enough to confuse the limit settings, even though the loop detector is reading fine. The gate creeps, reverses, or stops short. We level the gate, reset the post if it’s moved, and re-set the limits. The detector quits acting up. Call (877) 610-2993 and we’ll walk through what you’re seeing before we ever roll a truck.
Yes, we install solar panels to run DoorKing operators on long driveways where running utility power isn’t practical. The key is matching the panel array and battery bank to the gate’s weight, span, and use frequency. A gate that cycles 20 times a day in a Greensburg winter needs more reserve capacity than a gate that cycles five times. We’ll spec it right the first time. Call (877) 610-2993 for a free estimate, and we’ll come out and measure.
Call Gatewood Fence & Gate for Gate Parts & Welding in Greensburg
When your gate binds on the downhill side every spring or the hinges won’t take another winter, call (877) 610-2993. You’ll talk to a live person. We’ll come to Greensburg, look at the gate, and quote you a price before any work starts. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Free estimates, no trip charge inside the county, and a 90-Day Done Right Promise in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greensburg since 2001.