Gate Parts & Welding in Goodlettsville - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Goodlettsville

Gate parts and welding in Goodlettsville usually means one of three things: a hinge post that’s tilted out of plumb, a hinge strap that’s torn loose from years of clay-soil movement, or a rack and pinion that stripped during the last ice storm. We fix all three on site, usually the same day you call. Hal Gatewood has been welding and repairing gates since 2001, and the clay along Two Mile Pike, Long Hollow Pike, and the I-65 corridor behaves the same way every year. If you need a hinge replacement, post reset, rail repair, or custom welding in Goodlettsville, call (877) 610-2993 and you’ll get a live person, not voicemail.

Call (877) 610-2993

Key Takeaways:

• We weld on site in Goodlettsville so your gate stays in your driveway, not hauled to a shop.
• Every job carries the 90-Day Done Right Promise in writing, signed by Hal Gatewood.
• We answer the phone 24/7 with a live person, and there’s no trip charge inside the county.
• Post replacements, hinge replacements, rail repair, and custom welding are quoted before work starts, never after.

Why Gatewood Fence & Gate Is Goodlettsville’s Preferred Gate Parts & Welding Company

Goodlettsville sits at an odd boundary. Part of the city is in Davidson County, part in Sumner County, and a single street can flip jurisdictions mid-block. That matters when you’re setting a gate post or running power to an operator, because what’s allowed on one side of the road may need a permit on the other. We deal with that patchwork every week, which means we know who to call and what to confirm before we start digging or welding. A lot of gate companies don’t. We do.

Our Gate Parts & Welding crew has pulled up to gates in Goodlettsville that other companies said needed to be scrapped, and we’ve welded them back square in an afternoon. The reason is simple: we repair what’s there before we start quoting replacements. On a farm entrance off Long Hollow Pike, we arrived to find a 16-foot tube-steel swing gate hanging off its hinge post. The post had twisted in the Nashville Basin clay and the bottom hinge strap had torn loose. We reset the post in a deeper concrete footing, welded a new heavy-duty hinge assembly onto it, and rehung the gate with a Ghost Controls solar opener. The gate swings level now, and the keypad works off-grid. That’s the work we do in Goodlettsville on a regular basis.

You’ll get the same person on the phone at 3 a.m. that you’d meet at the property. Hal Gatewood’s name is on the shop and on every invoice. The address is published, the license number is published, and if something isn’t right within 90 days, one phone call brings him back.

Our Gate Parts & Welding Services in Goodlettsville

Hinge Replacement

Hinges take the full weight of the gate plus every bit of post shift the clay soil delivers. On older ranch properties near Dickerson Pike and Main Street, we routinely find original manual wood or chain-link gates where the hinge pin has worn oval, or the strap has started pulling away from the wood. A hinge replacement in Goodlettsville typically runs $220 to $480 per hinge depending on gate weight and whether the post needs reinforcement first. We weld the new hinge in place rather than relying on lag bolts that will loosen again in two seasons.

Post Replacement

Clay soil along Two Mile Pike heaves and tilts posts out of plumb faster than anywhere else we work. A sagging gate is almost never a problem with the gate itself; it’s the post leaning. We dig out the old post, set a new one in a deeper footing than the original, and often weld a saddle or brace so the hinge point stays true. A post replacement in Goodlettsville generally costs $450 to $900 depending on depth, concrete, and whether we’re also moving electric or solar wiring. We always confirm which county governs the property before we set a new post, because one side of the road may need a permit and the other side won’t.

Rail Repair

Tube-steel rails crack at the weld points when the gate sags against a stuck latch or when an operator pushes against a misaligned track. We see this on HOA community gates along the I-65 growth corridor, especially after freeze-thaw cycles have done their work. Rail repair in Goodlettsville typically runs $180 to $400, including grinding out the old weld and re-welding with new gusset plates where needed. If the rail is rusted through beyond a clean weld, we’ll tell you that before we cut anything.

Custom Welding

Not every gate problem has an off-the-shelf fix. For acreage entrances and farm gates off Long Hollow Pike or Two Mile Pike, we fabricate brackets, extend gate leaves, build drop-bar receivers, and weld opener mounting plates onto posts that were never designed for automation. Custom welding in Goodlettsville runs $90 to $140 per hour, or we can quote the whole job as a fixed price after we see the gate. That’s a written quote agreed to before the welder fires up.

Trusted Brands We Service in Goodlettsville

We’re certified to service nine major gate brands, and in Goodlettsville the ones we work with most are FAAC, BFT, Linear, and Viking. That’s because those four show up constantly on HOA swing-arm systems and older estate gates along the I-65 corridor. We keep common hinge assemblies, rack sections, and opener brackets stocked for Goodlettsville calls, which means we aren’t waiting on a parts truck from Nashville. If a hinge weld fails on a Thursday, you shouldn’t still be waiting on Saturday.

Common Gate Parts & Welding Problems We See in Goodlettsville Homes

• Clay soil heaving hinge posts out of plumb. The Nashville Basin clay along Two Mile Pike expands and contracts with seasonal moisture swings, and it slowly shoves posts sideways. A gate that dragged the ground in June may bind at the latch by February. Post reset work fixes this at the root.
• Ice storms stripping HOA slide-gate racks. After a Goodlettsville ice storm, slide gates along the I-65 corridor sit coated in glaze ice. When the operator tries to move a frozen gate, the pinion chews teeth off the rack, and the motor overloads the next morning. A single weather event can keep us busy for a week just on rack and pinion replacements.
• Retrofitted openers cracking thin-wall steel posts. Many 2000s-era subdivisions installed operators on posts the original fence contractor set for a manual gate. Add automation, and the torque cracks the post at the weld. We see this constantly in HOA communities. The fix is a heavier post or a welded reinforcement plate, not another operator.
• Solar battery trays corroding after winter freeze-thaw. On long-driveway gates off Long Hollow Pike where grid power isn’t practical, the solar battery tray traps moisture. Freeze-thaw cycles corrode the contacts, and the gate opens on a random schedule. We clean or replace the tray and re-weld any mounting hardware that’s weakened.

Pricing for Gate Parts & Welding in Goodlettsville, TN

We Also Serve Cities Near Goodlettsville

Our gate parts and welding crews cover Goodlettsville plus Millersville, Hendersonville, Greenbrier, and White House. If you’re just north of the county line or heading out toward the acreage side of Sumner County, we’ll be out there with the same no-trip-charge policy and the same 90-Day Done Right Promise.

FAQs - Gate Parts & Welding in Goodlettsville