Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Glenarden
Gate parts and welding in Glenarden usually means one thing: a hinge post that has tilted out of plumb, a latch that no longer lines up, or a rusted base about to snap. Most repairs run $180-$650, and we’ll come out, diagnose it in your driveway, and weld it on site so the gate never leaves your yard. Call (877) 610-2993 and you’ll get Hal or someone from his crew, not a voicemail.
We work throughout 20785 every week, from the ranch houses near the municipal center to the townhome clusters off Martin Luther King Jr. Highway. If your gate is sagging, dragging, or stuck open, we’ll tell you honestly whether it needs a hinge, a new post, or a weld repair, and we’ll quote the price before any work starts.
Why Gatewood Fence & Gate Is Glenarden’s Preferred Gate Parts & Welding Company
We’ve been owner-operated since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That’s not a slogan. It means when something isn’t right, you call and the person who answers is the same person who can make it right. Our Gate Parts & Welding team has repaired and rebuilt gates in Glenarden long enough to know which ranch fences were built in the 1960s, which townhome gates run on DoorKing or Viking operators, and which management companies want permit paperwork before they’ll approve a single weld.
Every job carries our 90-Day Done Right Promise in writing. If the hinge pulls loose or the weld cracks within 90 days, we come back and fix it. No runaround. And because Glenarden is an incorporated city inside Prince George’s County, we handle the dual-jurisdiction permit question upfront, not as an afterthought that leaves you with unpermitted work and a title headache when you sell.
Our Gate Parts & Welding Services in Glenarden
Hinge Replacement
Most swing gates in Glenarden’s older ranch neighborhoods were hung on galvanized strap hinges in the 1960s and 70s. After 50 years of Prince George’s County clay soil heaving each winter, those hinge pins wear oval and the gate drops. We cut off the old hinges, weld new barrel or strap hinges at true plumb, and re-hang the gate so the latch actually catches. Hinge replacement in Glenarden typically runs $180-$320 per hinge set, depending on gate weight and whether we need to rebuild the mounting surface first.
Post Replacement
When a gate post tilts or snaps at the footing, the hinge is rarely the real problem. The post is. We dig out the old concrete collar, reset a new galvanized or powder-coated post below frost depth, and weld the hinge tabs in place once the footing has cured. In Glenarden, where clay soil keeps moving with every freeze-thaw cycle, we set post footings deeper than code minimums because we know what happens if we don’t. Post replacement with welding runs $350-$650 for a single swing gate post.
Rail Repair
Chain-link gate frames in Glenarden’s older sections crack at the rail welds, especially where the top rail meets the hinge stile. Summer humidity under tree shade accelerates the rust, and a cracked rail turns into a gate that flexes and drags. We weld the crack, add a reinforcement gusset where the frame needs it, and re-coat the repair so it doesn’t rust through again next season. Typical rail repair runs $150-$280 per joint.
Custom Welding
Some gates need more than a part swapped. A custom welded bracket for a Ghost Controls opener, a reinforced hinge plate for a heavy steel gate, a new latch striker that matches a 1970s frame nobody manufactures anymore. We weld on site in your driveway, which means your gate stays where it is and you watch the repair happen. Custom welding in Glenarden runs $90-$150 per hour plus materials, and we’ll give you a written number before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glenarden
We service and weld repair hardware from Linear, Viking, Ghost Controls, and DoorKing, among others. If you have a Linear opener on a slide gate in a newer Glenarden townhome cluster or a Viking swing operator on a ranch gate off Ardwick-Ardmore Road, we stock the common replacement parts and can weld mounting brackets on the spot. No mailing your gate off, no waiting two weeks for a factory part that the operator doesn’t actually need.
Common Gate Parts & Welding Problems We See in Glenarden Homes
- Hinge posts tilting out of plumb. Prince George’s County’s expansive clay soils heave every winter, and decade after decade that pressure pushes gate posts off vertical. The latch stops lining up, and the gate starts dragging on the latch side. We reset the post and weld the hinges back at true plumb.
- Rust at the base of galvanized posts. The older tree-shaded blocks in Glenarden hold moisture against the post base, and galvanized chain-link posts from the 1960s rust through right at the concrete collar. The post snaps, and the whole gate drops. We cut the post at the footing, sleeve or replace it, and weld the frame back together.
- HOA townhome gates losing photo-eye calibration. When a gate operator in a townhome cluster fails entrapment protection, the gate reverses or refuses to close. The management company won’t approve a repair without a permit, and sometimes the fix is a welded bracket holding the photo-eye out of alignment. We handle the weld and the operator adjustment.
- Weld fatigue on slide gate racks. Newer Glenarden communities with slide gates see the rack welds fatigue over time, especially when the gate rollers wear and the gate drags. We re-weld the rack, replace the rollers, and re-track the gate so it doesn’t happen again next year.
Pricing for Gate Parts & Welding in Glenarden, MD
Here’s what you can expect to pay for gate parts and welding in Glenarden’s market. Hinge replacement runs $180-$320 per hinge set. Post replacement with welded hinge tabs runs $350-$650. Rail repairs run $150-$280 per joint. Custom welding runs $90-$150 per hour plus materials. These are the numbers we quote before we start, and they don’t change at the door. You also get $40 off any repair over $200, a free second opinion on any written estimate from another company, and no trip charge inside the county. Seniors and veterans get a permanent 10% discount on every job. Call (877) 610-2993 for a free, written estimate.
| Service | Typical Glenarden Price |
|---|---|
| Hinge replacement (per set) | $180 - $320 |
| Post replacement with welding | $350 - $650 |
| Rail repair (per joint) | $150 - $280 |
| Custom welding | $90 - $150 per hour + materials |
We Also Serve Cities Near Glenarden
Our gate parts and welding service covers Glenarden and the surrounding communities, including Summerfield, Lanham, Landover, and Walker Mill. If you’re in a neighboring town and your gate is sagging or stuck, call us. The permit rules are different in unincorporated areas, and we’ll walk you through exactly what applies to your property.
Serving Glenarden, MD - Our Local Coverage Area
We’re based in the Glenarden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Glenarden
Yes, in most cases you need both. Glenarden is an incorporated city inside Prince George’s County, which means a gate post replacement that involves digging and resetting a footing can require county building review plus a check under Glenarden’s own municipal ordinances. We handle that paperwork from the start, including the permit walk-through with the city inspector, so you don’t close on a home sale three years later and find a title cloud. Call (877) 610-2993 and we’ll confirm exactly what your specific job needs.
Yes. We provide the repair drawings, material specs, and finish details that HOA management companies in Glenarden ask for before approving gate work. That includes the gate style, height, finish, and any welded bracket or post replacement details. We’ll submit it, adjust it if the architectural committee asks, and schedule the work once the approval comes through. Call (877) 610-2993 for a free estimate and we’ll start the approval package.
The hinges might be fine. The post is probably the problem. Glenarden sits on expansive Prince George’s County clay that heaves with freeze-thaw cycles, and after 50 or 60 winters the hinge post tilts out of plumb. The gate sags, the latch misses, and no amount of hinge tightening fixes it because the post is moving underground. We reset the post below frost depth and weld the hinge tabs at true plumb, which fixes the sag for good. Estimates are free, so call (877) 610-2993 and we’ll tell you exactly what’s moving.
Yes, if the operator is still in good shape. We re-weld or replace the rack, rebuild the roller brackets if they have worn, and true the track so the gate moves smoothly. If the operator is working, we don’t touch it. That’s the repair-first approach: fix what’s broken, don’t swap what isn’t. Call (877) 610-2993 and we’ll come look before you replace anything.
It can be either one. Sometimes the photo-eye bracket has been hit by a vehicle or nudged by the gate itself, and the fix is a welded bracket replacement. Sometimes the photo-eye itself is fine and the operator needs calibration. We’ll diagnose both in one trip. You don’t pay for two appointments to figure out what one visit answers. Call (877) 610-2993 for a free estimate, and we’ll tell you what’s actually wrong.
If your gate in Glenarden is sagging, rusted through, or stuck open, call (877) 610-2993. Hal Gatewood or someone from his crew will answer. We’ll give you a free estimate, do the weld on site, and stand behind it with our 90-Day Done Right Promise. No voicemail, no runaround, no surprise invoice at the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glenarden since 2001.