Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Gladstone
Gate repair in Gladstone usually comes down to one of two things: a post footing that failed below grade, or hardware that’s been on the gate since Lyndon Johnson was in office. We handle both. Gatewood Fence & Gate has been fixing gates since 2001, and we do the work in your driveway, not in some shop across town. Hal Gatewood answers the phone himself, and when a Gladstone gate is sagging into the mud after a wet winter, he’ll be the one who drives out to look at it. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Gladstone’s Preferred Gate Parts & Welding Company
Gladstone is a specific kind of place. The lots near the Clackamas River sit low and wet. The postwar houses have original gates that are now sixty and seventy years old. And the people who live here have been burned by companies that quote one price on the phone and show up with a different number on the invoice. That’s not how we work.
Hal has been owner-operated since 2001, and his name is on the shop and on every invoice. That means the person who quotes your gate repair in Gladstone is the same person who stands behind it. No dispatch queue, no call center three states away. Just a local operator who knows what Gladstone’s saturated soils do to a hinge post, and who fixes the post rather than slapping a new hinge on a failing footing.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. And dispatch is coordinated from our Portland metro office, so a crew can reach 97027 quickly when a gate is down or a post has let go.
Our Gate Parts & Welding Services in Gladstone
Hinge Replacement
Most hinge failures in Gladstone aren’t hinge failures at all. They’re footing failures that present as hinge trouble. A gate sags in the hinge post, not in the middle, and that’s where we start. We replace worn hinges with heavier gauge hardware, but only after confirming the post itself is still holding below grade. In low-lying parts of Gladstone, that confirmation means digging down past the rot line and seeing what’s actually left.
Post Replacement
This is the big one for Gladstone. Wood posts set in chronically saturated flood-zone soil rot from the ground up, often while looking perfectly sound above grade. We pull the old post, excavate the saturated hole, and set a new pressure-treated post in a deeper concrete footing. Done right, it outlasts what was there before. Done the shortcut way, your gate sags again in two seasons. We won’t do it the shortcut way.
Rail Repair
Mid-century Gladstone fences and gates were built with whatever lumber was cheap in 1962. Rails split, fasteners rust out, and gate frames rack out of square. We repair or replace rails, square the frame, and rehang the gate so it swings true. If the frame is too far gone, we’ll tell you that honestly and build a replacement rather than patch something that won’t hold.
Custom Welding
For steel gates, we weld on site. That means your gate stays in your driveway while we repair the frame, rebuild a broken hinge mount, or fabricate a bracket. No hauling it off to a shop you’ve never seen. Hal has been welding since he started this business, and the fix is done to match the gate, not just close enough to pass.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gladstone
We service the operators and hardware on most Gladstone gates, including Linear, Viking, and Ghost Controls swing gate operators, plus DoorKing slide gate systems. When a control board fails on an older operator, we stock the parts to fix it rather than telling you to buy a whole new unit. That’s a repair-first approach, and it’s how we’ve done it for 29 years.
Common Gate Parts & Welding Problems We See in Gladstone Homes
- Post footing failure below the frost line. Gladstone’s low-lying lots hold groundwater for months, and that water sits right at the base of your hinge posts. The post looks fine above ground, but it’s gone below. This is the single most common gate failure we see in 97027.
- Rust on slide gate hardware near the river. Rack and pinion hardware on slide gates corrodes fast in riverside yards where standing water sits after rain. Operators strain, then fail, because the gate can’t move freely anymore.
- Sixty-year-old hinges still on original mid-century gates. Gladstone’s 1950s and 1960s housing stock came with wooden swing gates that are now decades past their serviceable lifespan. Hinge pins wear egg-shaped, mounting screws strip, and the gate drags.
- Obsolete operators with no modern safety features. Many older Gladstone gates were hung before entrapment safety requirements existed. We retrofit photocells and edges onto legacy systems when possible, and tell you straight when replacement is the cheaper answer.
Pricing for Gate Parts & Welding in Gladstone, OR
Here’s what gate work in Gladstone typically runs. Hinge replacement on a wooden swing gate: $180 to $420, depending on post condition and hinge weight. Full post replacement with concrete footing: $450 to $900 per post. Custom welding on a steel gate frame: $200 to $600 for a typical bracket or frame repair. Rail repair and re-squaring: $250 to $550. If the post is rotting below grade, you’re not paying for a hinge swap; you’re paying for a footing rebuild, and that’s the honest range. Every price is quoted and agreed before any work starts. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Call (877) 610-2993 for a figure on your specific gate.
We Also Serve Cities Near Gladstone
From our metro office we serve Gladstone and the surrounding communities: Jennings Lodge, Oatfield, Oak Grove, and West Linn. If you’re in one of those areas and your gate is sagging, binding, or just not closing right, call (877) 610-2993. For a full look at what we do, see our Gate Parts & Welding service page, and for details on serving your area specifically, visit Gate Parts & Welding in Gladstone.
Serving Gladstone, OR - Our Local Coverage Area
We’re based in the Gladstone area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Gladstone
Because Gladstone’s low-lying, flood-adjacent soils stay saturated from October through May, and that water rots wooden posts from the base up. The visible portion of your post stays dry and looks fine. The part buried in wet clay doesn’t. We excavate the footing to see what’s actually left, and in most Gladstone cases, the answer is “not enough.” Replacement is the fix. Call (877) 610-2993 for an inspection.
In most cases, yes. We retrofit safety photocells and reverse edges onto legacy swing gate operators from brands like Linear and Ghost Controls. The gate frame and post still need to be structurally sound, but the operator and safety hardware can be brought up to current entrapment standards without replacing the whole gate. If the control board is obsolete, we’ll tell you whether a new board is worth it or replacement is the cheaper call. Estimates are free.
Gladstone sits at the confluence of the Clackamas and Willamette Rivers. Riverside yards hold standing water after heavy rain events, and that moisture sits on exposed slide gate hardware for weeks. Oregon City’s higher-elevation neighborhoods drain better. In Gladstone, we recommend upgrading to galvanized or stainless hardware on any slide gate near the river. The upfront cost is modest compared to replacing rusted rack and pinion every few years.
Push on the post near ground level. If it moves independently of the rest of the fence, or if the gate suddenly dropped an inch or more after a wet season, the footing has likely failed below grade. That’s a full post replacement with a new concrete footing. We’ll confirm it before we dig, and the price is agreed before any work starts. Call (877) 610-2993 and we’ll come look.
In Gladstone, the failure is almost always below grade. Saturated flood-zone soil rots the post footing, so we excavate, set a deeper concrete footing with a new pressure-treated post, and rehang the gate. At higher elevations, sag is usually a hinge or bracket issue. Gladstone’s repair profile is post-first. That’s what makes local experience matter here.
Call Gatewood Fence & Gate for Gate Parts & Welding in Gladstone
If your gate is sagging, rusted, or just not closing like it used to, call (877) 610-2993. A live person answers, 24/7. We’ll quote the work before anything starts, stand behind it with the 90-Day Done Right Promise, and fix the gate right there in your Gladstone driveway. Free estimates. No trip charge inside the county. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Hal will be there himself, or you can drive to the shop and look him in the eye.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gladstone since 2001.