Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Franklin Park
Gate parts and welding in Franklin Park usually comes down to one thing: the hinge post has moved, and the gate installation no longer lines up. In this part of the North Hills, that’s not a rare problem. Clay-heavy soil, steep driveways, and 30 to 40 freeze-thaw cycles every winter push concrete footings out of plumb, and an ornamental gate that weighed perfectly when it was installed starts binding at the latch. We fix it on site, in your driveway, with a welder and a plumb bob rather than a sales pitch for a new gate. Hal Gatewood has been doing that since 2001, and the shop’s phone is answered by a real person any hour you call. Reach us at (877) 610-2993.
Why Gatewood Fence & Gate Is Franklin Park’s Preferred Gate Parts & Welding Company
Franklin Park is not the kind of place where you gamble on a gate repair. The homes off Wexford Run Road, Rochester Road, and Brandt School Road are custom estates with long, sloped driveways and heavy ornamental gates. Homeowners here don’t call the cheapest ad in the mailer. They ask a neighbor who fixed their gate and whether the person showed up on time. We get a lot of those calls.
Hal Gatewood’s name is on the shop and on every invoice. He is the person who answers the phone. His address is published, his license number is public record, and he’s been at this since 2001. When a Franklin Park customer calls about a sagging swing gate, the person who shows up is carrying shim stock and a welder, because he already knows the frost heave cycle is the likely culprit. That’s not something a call center three states away can diagnose from a script.
Every job we do in Franklin Park carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no arguing about the warranty. That promise matters on a gate repair where a post moved six months after you thought it was fixed. It matters because Franklin Park winters are hard on concrete and steel.
Our Gate Parts & Welding Services in Franklin Park
Hinge Replacement
On a heavy estate gate in Franklin Park, the hinge is the component that takes every pound of the gate’s weight every time it swings. When frost heave tilts the post, the hinge gets torqued out of line, and the gate starts dragging. We replace hinges on ornamental iron, aluminum, and tubular steel gates, welding the new hinge in place rather than bolting it and hoping for the best. A bolted hinge on a 400-pound gate is a temporary repair in this climate.
Post Replacement
This is the repair we plan for on nearly every parts-and-welding call in Franklin Park. The concrete footing under a gate post sits in clay soil that swells and contracts with every freeze-thaw cycle. Over three to five winters, the post leans downhill, and the gate sags with it. We cut the old post out, set a new one with a deeper footing, and re-weld the hinge mounts. Then we check the gate with a level until it’s plumb and the latch catches clean. Fixing the panel without fixing the post means fixing it twice.
Rail Repair
Bent or cracked rails on sloped driveways are common in Franklin Park because the gate flexes as the posts shift. A lower rail that’s been dragging on asphalt for a season will crack at the weld joint. We straighten what can be straightened, cut out and replace what can’t, and weld the repair in place on site. You keep your original gate. You don’t tear out a matched pair of custom panels because one rail failed.
Custom Welding
When a gate can’t be bought off a shelf, we weld it. That includes custom ornamental panels to match existing estate gates, extension sections for driveway widening, heavy-duty stops for swing gates, and reinforced mounting plates for operator arms. We weld aluminum, iron, and steel in your driveway, not in some shop across town. The gate stays where it belongs while we work on it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Park
Most automated gates in Franklin Park run on gate motors and openers from FAAC, BFT, Linear, or Viking. We service all of them, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. When we carry parts to a Franklin Park job, we bring what’s likely to fail given the local conditions: replacement hinges, operator arms, keypad wire, and shim stock. We don’t order parts after we see the job and then charge you for a second trip. We show up with the truck stocked so the repair happens in one visit.
Common Gate Parts & Welding Problems We See in Franklin Park Homes
- Downhill sag on sloped driveways. Frost heave tilts the leading hinge post, and the gate settles toward the low side. In Franklin Park this typically happens over three to five winters, and the fix is post re-plumbing, not a new gate.
- Ice damage to low-voltage wiring. Ice storms hit the North Hills harder than the city proper because of the elevation. When water freezes inside conduit at the hinge post junction, it can shear the wires feeding keypads and operator arms.
- Cracked welds at rail joints. A gate that flexes every time the post shifts will eventually crack at the weld. We see this most often on ornamental iron gates that were welded years ago and have been fighting a moving post every season.
- Worn rollers and hinges on curved approaches. A curved driveway puts lateral pressure on the gate every cycle. Combined with asphalt that has shifted, the rollers and hinges wear unevenly, and the gate starts to grind instead of glide.
Pricing for Gate Parts & Welding in Franklin Park, PA
Here’s what our Franklin Park customers can expect, stated straight. A hinge replacement on a typical ornamental gate runs $180 to $340 per hinge, including welding and alignment. Post replacement with a deeper concrete footing runs $500 to $1,100 per post, depending on whether the old footing has to be broken out by hand. Rail repair, including straightening and re-welding, runs $220 to $480. Custom welding work is quoted by the job after we look at the gate, but simple welded repairs start around $150. Every price is quoted and agreed before any work starts. You will not get a larger invoice than the number we discussed. There is no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you a real number before he puts the welder in the truck.
We Also Serve Cities Near Franklin Park
From the shop’s base coordinating local crews, we cover the whole North Hills. That includes Franklin Park itself, plus Franklin Park neighbors in West View, Allison Park, Bellevue, and Glenshaw. If your gate is sagging or a weld cracked, call and ask for Hal. He can tell you over the phone whether it’s a quick fix or a post that finally needs re-setting. Most of the time he’ll know before he even sees it, because he’s seen the same gate failures all over this terrain.
Serving Franklin Park, PA - Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Franklin Park
Because the hinge post is tilting. Franklin Park’s clay-rich soil swells and contracts through 30 to 40 freeze-thaw events a winter, and each cycle moves the concrete footing a fraction of an inch. After three to five winters, that fraction adds up to a visible sag. The real fix is re-plumbing the post and setting it in a deeper footing, not hanging the gate higher on the hinge. Call (877) 610-2993 and we’ll check the post with a level and tell you exactly what’s moving.
Yes, in most cases. We straighten aluminum and iron rails on site with careful pressure and heat control, then weld any stress cracks closed. If the rail is too far gone, we cut out the damaged section and weld in a new piece that matches the original profile. You keep your gate. The repair is quoted before we start, and the 90-Day Done Right Promise covers the weld. Call (877) 610-2993 for a straight answer.
We replace the arm, but first we check why it broke. In Franklin Park, an underground operator arm usually fails because the gate post shifted and the arm started fighting the gate’s weight at a bad angle. If we only replace the arm, it’ll break again. We’ll re-plumb the post, align the gate, and then install the new arm so it runs true. The estimate is free. Call (877) 610-2993.
We do. The trucks we send to Franklin Park carry heavy-duty welded hinges sized for the kind of gates on custom estate properties off Wexford Run Road and Rochester Road. We stock iron hinges for ornamental gates, aluminum for lightweight panels, and steel for heavy tubular gates. The hinge is welded in place after the post is plumbed. Call (877) 610-2993 and tell us what your gate weighs and we’ll bring the right part the first time.
Yes. We grind back the failed weld, weld the joint properly, and then dress the repair so it can be touched up to match the surrounding finish. We don’t leave ugly globs of weld on a gate that sits at the entrance to a custom home. We’ll be honest about the finish: a welded repair on iron will need a touch-up coat in the repaired area, and we’ll tell you what to use. Call (877) 610-2993 for a free estimate on weld repair.
If your gate is sagging in Franklin Park, don’t wait for the next freeze to make it worse. Call (877) 610-2993 and talk to Hal Gatewood. He will give you an honest answer, a written price, and a time he’ll be there. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Gate Parts & Welding Resources
Learn more about our full Gate Parts & Welding capabilities, including on-site welding for ornamental and estate gates across the region. For service in this community, see Gate Parts & Welding in Franklin Park.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Franklin Park since 2001.