Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Forney
Gate parts and welding in Forney comes down to one thing: a gate that opens and closes square, every single time. Forney’s black clay soil works against that more than almost any other force we deal with. We’ve been called out to Clements Ranch, Travis Ranch, and Gateway Parks enough to know exactly what a builder-grade hinge looks like when it’s about to let go, and exactly how deep a post footing has to go to survive one full wet season on Blackland Prairie clay. If your gate is dragging, sagging, or honestly just not latching anymore, call Hal Gatewood at (877) 610-2993. He will tell you the truth about what it needs, and he has been doing that here since 2001.
Key Takeaways
- Forney’s expansive clay soil heaves gate posts out of plumb every spring and drops them back in drought. Most builder-grade posts were never set deep enough to handle it.
- A hinge replacement on a Forney gate usually runs $180-$340 including the welded work and the new hardware. Post replacement runs $450-$1,200 depending on depth, concrete, and whether we need a helical anchor.
- Custom welding on site means the gate stays in your driveway. We don’t haul it to a shop on the other side of Dallas.
- The 90-Day Done Right Promise is in writing on every job. If it’s not right, Hal comes back and makes it right. That’s the whole deal.
- We answer the phone with a live person, 24 hours a day. Call (877) 610-2993 and you won’t get a menu tree.
Why Gatewood Fence & Gate Is Forney’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That is the oldest accountability there is, and it’s the one that matters most to the folks we work for in Forney. Our Gate Parts & Welding crews have been pulling into Forney driveways for years now, and we’ve seen the same pattern repeat itself block after block: builder-spec hinges shearing off, post anchors that never had a chance, and gates that drag on one corner the week after a hard rain. We fix what’s actually broken instead of quoting you a whole replacement.
When you call us, a real person picks up. Not a voicemail, not a dispatch queue. That person knows gates, knows Forney, and can usually tell you over the phone whether you’ve got a hinge problem, a post problem, or a track problem. We publish our address and license number, and we have been at this since 2001. That is not an accident. We are not passing through.
We serve Forney from our Dallas-Fort Worth office, with crews that know this side of the metro. Senior and veterans get a permanent 10% discount. Any repair over $200 takes $40 off. No trip charge inside the county. Those are standing offers, not something you have to negotiate for.
Our Gate Parts & Welding Services in Forney
Hinge Replacement
Forney gates fail at the hinge long before anywhere else. Production builders put economy barrel hinges on thousands of gates across Travis Ranch and Clements Ranch in the 2010s, and those hinges are now hitting the end of their service life in one synchronized wave. When the post tilts even half an inch on clay, the hinge takes all the abuse. We cut the old ones off, weld on heavy-duty replacements, and set the gate so it swings clean with an even reveal top to bottom. A typical hinge replacement in Forney runs $180-$340 per gate, welded and done.
Post Replacement
This is the big one in Forney, and it’s the one out-of-town companies get wrong the most. A gate sags in the hinge post, not in the middle, and that is where we start. The Blackland Prairie clay under Forney swells with spring rain and shrinks in the summer heat wave, cyclically heaving post footings until the post leans, the gate drags, and the latch won’t catch. We pull the old post, auger a deeper footing, and when the soil calls for it, drive a helical anchor to six feet so the post stays put. Post replacement with a proper expansive-soil footing runs $450-$1,200 in Forney depending on the gate size and how deep we have to go.
Rail Repair
The rails on an ornamental iron gate take a beating when the post moves, especially on the 75126 side of Forney where clay movement is about as aggressive as anywhere east of Dallas. Welds crack, rails sag, and the gate starts to look like it’s melting. We weld rails back square in the driveway, on site, so the gate never leaves your property. A straightforward rail weld in Forney typically runs $150-$250. If the rail damage is secondary to a post that has shifted, we will tell you that first, because welding a rail onto a moving post just means you’ll be calling us again next spring. Fix the panel without the post and you’ll fix it twice.
Custom Welding
Sometimes what a Forney gate needs doesn’t exist on any parts shelf. We fabricate brackets, extend panels, weld on new mount points for gate openers, and build the kind of reinforcement that builder-grade iron never had. Need a keypad pedestal welded up to match the fence line? Need a heavy-duty drop rod anchor built for soil that actually moves? That is custom welding, and it’s a regular part of our week out here. Custom welding work in Forney usually starts around $200 and goes up from there based on materials and time. Hal will give you a firm number before any torch gets lit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Forney
We service and stock parts for Viking, Ghost Controls, and DoorKing operators, which covers a lot of the automatic gates we see in Forney’s HOA communities. We also work on Elite openers on a regular basis. If your operator is acting up and a repair shop told you to replace it, get a second opinion from us first. A free second opinion on any written estimate is a standing offer. We repair what other companies want to replace, and that goes for the opener just as much as the gate itself. Parts for Forney jobs get pulled same day, and we carry enough Viking and Ghost Controls inventory that most repairs don’t wait on a truck from California.
Common Gate Parts & Welding Problems We See in Forney Homes
- Heaved hinge posts. Forney’s Blackland Prairie clay swells every spring and shrinks in drought, tilting posts that were set in shallow 18-inch footings. The gate drags, the latch won’t line up, and the whole panel starts working its welds loose. This is the single most common failure we see, and it’s why a Forney gate sag cannot be fixed by shimming hinges alone.
- Builder-grade hinge failures. The production builders who put up thousands of Forney gates in the 2008-2022 wave used economy barrel hinges that corrode and seize. Once the panel drags on a tilted post, those hinges tear out in one season. We see entire cul-de-sacs in Clements Ranch where four of five neighbors have the identical hinge failure.
- Drop rods that never get used until the gate breaks. Forney’s HOA communities love a double gate with a drop rod. When the post shifts, the rod jams, and somebody leans a shoulder into the gate to force it. That bends the rod and cracks the weld at the collar. Fix it right once, and the gate holds through every wet season after.
- Missing conduit stub-outs on manual gates. A surprising number of Forney homes built in the 2010s got manual swing gates installed without conduit for future automation. Then the homeowner wants a keypad and an opener, and the wire either gets surface-run across the driveway or the concrete gets cut. We deal with this constantly in Gateway Parks and Travis Ranch.
Pricing for Gate Parts & Welding in Forney, TX
Forney pricing for gate parts and welding work is honest money for honest work, and we will always give you a number before any work starts. Hinge replacement ranges from $180 to $340 per gate. Rail repair runs $150 to $250 for a typical crack or sag weld. Post replacement, the one every Forney homeowner eventually needs, runs $450 to $1,200 depending on footing depth, helical anchor requirements, and gate size. Custom welding typically starts around $200 and goes up based on what you’re asking us to build. Every estimate is free, and the price we quote is the price you pay. No surprise upcharge at the door. If you’ve got a written estimate from another company, bring it to us for a free second opinion. And if you’re a senior or a veteran, take 10% off that price, permanently. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Forney
Our Gate Parts & Welding in Forney service area reaches into nearby cities too. We regularly work in Sunnyvale, Seagoville, Balch Springs, and Mesquite, so if you’re just across the line from Forney, we are already running calls in your area. The same pricing, the same 90-Day Done Right Promise, the same live person on the phone.
Serving Forney, TX - Our Local Coverage Area
We’re based in the Forney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Forney
Because the Blackland Prairie clay under those neighborhoods heaves when it absorbs spring rain, and the production builders who set those posts used shallow 18-inch footings that were never designed for expansive soil. Every wet season, the clay swells and pushes shallow posts out of plumb, then the summer drought shrinks the soil and the post drops back, leaving it leaning just a little more than last year. The permanent fix is a deeper footing with a helical anchor rated for expansive soil, not just resetting the post in the same shallow hole. Forney post replacement with a helical anchor usually runs $600-$1,200 depending on the gate. Call (877) 610-2993 for a free assessment before the next rain cycle gets going.
Yes. If your Gateway Parks home has a manual gate with no buried conduit, we can still get power and control wiring to an opener. In most cases we run the wiring through the gate itself or along the fence line in a way that doesn’t meet the curious noses of Forney’s small wildlife, and for double gates we handle the low-voltage connection under the driveway with a clean, safe traversal. Adding automation to a manual gate in Forney usually runs $900-$2,400 for the operator, wiring, safety sensors, and push-button entry, depending on whether you go solar or hardwired. We quote every job before work begins. Call (877) 610-2993 for a free quote on your specific gate.
Because the problem is almost never the panel, it’s the post. On Forney’s expansive clay, the hinge post tilts out of plumb, the whole gate shifts downhill, and the latch side drags on the concrete. The panel itself can look perfectly straight while the post under the hinge is two inches out. Our techs saw exactly this in Clements Ranch: a gate dragging at the latch with a panel that looked square, where the original builder had set the hinge post in an 18-inch footing that heaved after spring rain. We cut the post free, drove a helical anchor six feet deep, welded on a new heavy-duty barrel hinge, and re-hung the gate with a proper reveal. Hinge replacement alone on a moving post just means you’ll be calling us again next year. We won’t do that to you. A proper post-and-hinge repair in Forney runs $500-$1,000.
Yes. Automatic gates in Forney, like everywhere else in Texas, are manufactured and installed under UL 325 requirements that include adjustable safety means such as photocells, edge sensors, or inherent entrapment protection. This is not a suggestion and we won’t install an opener without them. A photocell pair on a Forney driveway gate typically adds $150-$300 to an opener installation. We set the sensors so they trip reliably even with the dust kicked up by a dry Forney summer, and we test them before we leave. Safety edges on the posts are standard on most jobs. We will not shortcut this, period. Call (877) 610-2993 with any questions about your setup.
It can work, but only if the track is set on a footing deep enough to handle Blackland Prairie clay movement. A shallow track pour will heave and crack within a couple of wet-to-dry cycles, and then the gate rolls rough or jumps off entirely. In Forney we pour slide gate tracks on a continuous beam footing that goes below the active heaving zone, and we use V-track wheels with guides so the gate stays down even when the surrounding soil does its annual dance. A properly poured slide gate track in Forney runs $800-$2,000 depending on length and grade. We install Viking, Ghost Controls, and DoorKing slide operators alongside it, and we’ll make sure the physics work before you commit to a slide gate. Call (877) 610-2993 to talk through it.
The Forney Gate Problem Most Homeowners Don’t Know They Have
Here’s something we understand about Forney that you’ll never get from a company out of Dallas. Forney’s explosive growth along the US-80 corridor filled Clements Ranch, Travis Ranch, and Gateway Parks with thousands of builder-grade wood and iron gates installed simultaneously in the 2010s. Those gates are all hitting their first major failure cycle at the same time, right now. The economy hinges, the shallow post footings, the drop rods with no grease fitting, they were never built for shrink-swell clay subsoil, and they are all aging out on the same schedule. That’s why we see block-by-block clusters of identical failures here, a thing we just don’t see in older neighborhoods with gates from different vendors put in across different decades. After one Forney repair we often find four or five neighbors on the same cul-de-sac with the same bent hinge or the same dragging gate. It is not a coincidence. It’s builder-grade hardware meeting Blackland Prairie reality.
One recent job sticks. Our tech was called to a sagging ornamental iron driveway gate in Clements Ranch where the original production builder had set the hinge post in a shallow 18-inch footing. The Blackland Prairie clay had heaved the post a full two inches out of plumb after spring rains, binding the gate at the latch side. We cut the post free, drove a helical anchor to six feet for an expansive-soil-rated post footing, welded a new heavy-duty barrel hinge to correct the sag, and re-hung the gate with a ¾-inch reveal. The next week we repaired four near-identical hinge failures on the same cul-de-sac. That’s Forney. That’s the pattern. And that’s why we’re here.
If your gate is binding, dragging, or sagging in Forney, don’t wait for the wet season to finish what it started. Call Hal Gatewood at (877) 610-2993. He will answer the phone, tell you straight what it’ll take, and show up when he says he will. Estimates are free. The 90-Day Done Right Promise is on paper. And the name on the shop is the name you’ll see on the side of the truck.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Forney since 2001.