Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Forest Grove
Gate parts and welding in Forest Grove usually breaks down to one question: is the problem worth fixing, or does the whole gate need to go? We fix it. That’s what we’ve done since 2001, and around here, most gates are worth saving. Forest Grove’s west-of-town rural corridors sit on clay-heavy soils that heave and lean 6×6 wood posts every wet winter, so most gate parts and welding repairs here start with resetting the hinge post in a proper concrete footing before touching the panel. If your gate sags, drags, or won’t latch, call (877) 610-2993 and a live person answers. We’ll give you a straight answer and a price before any work starts.
Why Gatewood Fence & Gate Is Forest Grove’s Preferred Gate Parts & Welding Company
Hal Gatewood has been doing this work since 2001, and his name is on the shop. That matters in a town like Forest Grove, where people still check whether the person answering the phone is the same person who shows up. It is. We’re owner-operated, with a published address and license number anyone can look up. Our Gate Parts & Welding team does the work on site, in your driveway, with welding equipment in the truck. We don’t haul your gate to some shop across the county unless there’s no other way to do it right.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround. We also answer the phone live around the clock, not with a voicemail or a call center three states away. That’s the kind of accountability you want when a 400-pound steel gate has dropped off its hinge post at 9 p.m. and your driveway is wide open.
Our Gate Parts & Welding Services in Forest Grove
Hinge Replacement
Rust seizes steel hinges during the October through May rainy season, especially on rural slide gates that sit in standing water along gravel driveways outside Forest Grove. We cut off the old hinge, grind the post clean, and weld on a new heavy-duty hinge rated for the gate’s actual weight. For wood gates in older neighborhoods near downtown Forest Grove, we use through-bolted strap hinges that won’t pull out of wet wood the way lag screws do.
Post Replacement
This is the job we do most often on rural properties west of Forest Grove. Wood 6×6 posts set directly in clay-heavy soil heave and lean after repeated wet winters, throwing swing gates out of alignment and binding the hinges. A gate sags in the hinge post, not in the middle, and that’s where we start. We dig out the old post, set a new one in a proper concrete footing, and only then rehang the gate and address whatever else needs attention.
Rail Repair
Wooden gate frames split with the wet-dry seasonal swing that Forest Grove gets more than most of Washington County. Soaking winters expand the wood, dry summers contract it, and after enough cycles the rails crack at the joints. We repair or replace the rail, reinforce it where it makes sense, and make sure the frame is square before it goes back on the hinges. Fix the panel without the post and you’ll fix it twice. We fix both the first time.
Custom Welding
Steel farm gates, tube-steel swing gates, and long driveway automated gates all eventually need welding. We build and repair gate frames, weld on hinge plates, fabricate mounting brackets for operators, and reinforce corners that have started to fail. The welding happens on site, in Forest Grove, with the gate still hanging where it belongs. If a hinge rusted off your existing steel gate, we can weld a new one on. If a corner cracked, we’ll plate and stitch it. You keep the gate you already have.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Forest Grove
We’re certified to service nine major gate brands, including Viking, Ghost Controls, and DoorKing. That covers most of the automated gate operators running on Forest Grove properties, from small residential swing gates near downtown to long-driveway solar rigs in the rural corridors. We carry a range of common parts in the truck, and anything we don’t have we can usually source same or next day from local suppliers. For rural Forest Grove homes running Viking or Ghost Controls operators, that means less downtime when a wet winter finally catches up with the circuit board.
Common Gate Parts & Welding Problems We See in Forest Grove Homes
- Heaving and leaning 6×6 posts. Clay-heavy soil west of Forest Grove expands in the wet season and shifts posts out of plumb, binding hinges and dragging the gate. We reset the post in concrete before anything else.
- Rust-seized hinges and rollers. October through May brings 45-plus inches of rain, and steel parts sitting in standing water fail fast. We swap in sealed-bearing rollers and weld on corrosion-resistant hinges where it makes sense.
- Moisture in operator housings. Long-driveway automated gates around Forest Grove see circuit board and motor corrosion when water gets into the housing. If your solar opener quits after a few rainy weeks, moisture is almost always the culprit.
- Split wood frames. Older homes near historic downtown Forest Grove often have original wood gates that have survived decades of expansion and contraction. The rails crack, the gate sags, and the latch stops meeting the strike plate. We repair or replace the rail and hang it square again.
Pricing for Gate Parts & Welding in Forest Grove, OR
A hinge replacement on a residential gate in Forest Grove typically runs $180 to $340 per hinge, depending on the gate’s size and whether the post is sound. Resetting a 6×6 post in concrete runs $350 to $600, which includes the new post, footing, and rehanging the gate. Custom welding jobs like reinforcing a cracked steel frame or fabricating an operator bracket usually land between $150 and $450, depending on time and material. Rail repairs on wood gates fall in the $200 to $400 range. The price is quoted and agreed before any work starts. That’s not a maybe. That’s the rule.
We offer $40 off any repair over $200, no trip charge inside Washington County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Forest Grove
Beyond Forest Grove proper, we work regularly in Cornelius, Hillsboro, Aloha, and Rockcreek. That means if you’re on the edge of town or in an unincorporated pocket, you’re still in our service area. Gate Parts & Welding in Forest Grove is our local focus, but the crew covers the surrounding communities seven days a week.
Serving Forest Grove, OR - Our Local Coverage Area
We’re based in the Forest Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Forest Grove
Your post is almost certainly set directly in clay-heavy soil without a concrete footer, which is common on older rural properties west of Forest Grove. Wet winters saturate the clay, it expands, the post heaves and leans, and the gate drags. The permanent fix is resetting the post in a proper concrete footing that goes below the frost line and the heave zone. Call (877) 610-2993 and we’ll dig it out and set it right.
Yes, and that’s a routine job for us. We cut off the rusted hinge, clean the area back to sound metal, and weld a new heavy-duty hinge in place. The gate stays in your driveway the whole time. If the post is too far gone to hold the new hinge, we’ll tell you up front and quote the post work separately before any welding starts.
Moisture has infiltrated the operator housing and is shorting or corroding the circuit board, which happens often on long-driveway gates around Forest Grove during the rainy season. The fix is usually replacing the board and resealing the housing, not replacing the whole operator. We service Viking, Ghost Controls, and DoorKing, among others. Call (877) 610-2993 and we’ll come look before you spend money on parts you might not need.
If you pull a trailer, haul livestock, or park equipment near the gate, a loop detector is worth having. It lets the operator know when a vehicle is sitting in the gate’s path so it won’t close on the trailer or hold against a stopped truck. We can add one to most existing automated gate systems. We reset a rural gate west of town and added a loop detector so the operator would hold the gate open for the homeowner’s livestock trailer. That’s the kind of detail that keeps a gate working for years instead of months.
Old-town wood gates usually sag because the frame has split or the hinge screws have pulled out of wet wood, so the repair is about rebuilding the rail and through-bolting the hinges. Rural steel farm gates usually lean because the post has heaved out of plumb in the clay, so the repair starts with resetting the post in concrete before any welding happens. Same town, two different problems. We fix both, and the price is always quoted before work begins.
Call Gatewood Fence & Gate for Gate Parts & Welding in Forest Grove
If your gate is sagging, dragging, seized up, or wide open when it shouldn’t be, call (877) 610-2993. A live person answers, day or night. We’ll ask what’s going on, tell you straight whether it sounds like a simple hinge job or a full post reset, and schedule a time that works. The estimate is free, the price is agreed before any work starts, and every job carries the 90-Day Done Right Promise. In a town like Forest Grove, that’s the way it should work. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Forest Grove since 2001.