Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fordham
Gate parts and welding in Fordham comes down to one thing: most of the ironwork in this ZIP is older than the people walking through it. The pre-war courtyard gates on 1920s and 1930s walkups were built with mortise-style pin hinges that nobody manufactures anymore, which means a simple hinge replacement usually turns into custom fabrication and on-site welding. That’s the work we do every week. If your gate sags, seizes, or won’t latch, call (877) 610-2993 and Hal will talk you through what’s actually wrong before anyone sets foot on your block.
Why Gatewood Fence & Gate Is Fordham’s Preferred Gate Parts & Welding Company
Hal Gatewood has been repairing gates since 2001, and his name is on the shop and on every invoice. When someone in Fordham calls about a sagging courtyard gate on East 189th or a roll-down that’s grinding on Fordham Road, the person who answers is the person who will show up. No voicemail maze, no call center three states away. Just a live voice at (877) 610-2993, any hour, any day.
Fordham’s mix of densely packed residential blocks and one of the Bronx’s busiest commercial strips means we see two very different types of gate work in the same ZIP: aging wrought-iron entry gates on pre-war apartment buildings, and commercial roll-down gates that run heavy daily cycles and take constant abuse from foot traffic and deliveries. That dual caseload is specific to Fordham, and it’s shaped how we stock our truck. We carry hinge plate stock, gate rollers, and rack sections sized for the hardware this neighborhood actually uses.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal makes it right. And because the shop is locally owned and owner-operated with a published address and license number anyone can look up, you can drive down and look him in the eye if you ever need to.
Our Gate Parts & Welding Services in Fordham
Hinge Replacement
Here’s the Fordham reality: a lot of the pedestrian gates in 10468 still run on original mortise-style pin hinges that went out of production decades ago. You can’t order a replacement. Hinge replacement in Fordham almost always means either custom fabrication to match the original barrel and pin dimensions, or welding modern hinge plates onto the existing post and gate frame. We do both on site, in your driveway or courtyard, so the gate never leaves the property.
A sagging gate is almost never a bent panel. The failure starts in the hinge post. Fix the hinge without addressing the post and you’ll fix it twice.
Post Replacement
When a hinge post rots at the base or shifts from freeze-thaw cycles, the whole gate goes out of square. In Fordham, many of these posts are set into concrete walkways or shared courtyard aprons that can’t be torn up without disrupting tenants. We replace the post in place, cutting at the base and welding a new section, then re-plumbing the post so the gate swings true. Shared driveways and rights of way stay passable while we work.
Rail Repair
Bottom rails on wrought-iron gates take the worst of it in Fordham. Water runs down the pickets, pools in the bottom rail, and freezes. Repeat that for 30 or 40 winters and the rail splits from the inside. We cut out the failed section, weld in new steel, and grind it smooth so it holds paint and doesn’t trap water. If the top rail is bowed from someone climbing over a locked gate, we straighten or replace that too.
Custom Welding
Sometimes the part your gate needs doesn’t exist and never did. A lot of Fordham courtyard gates were custom built for their openings, and the brackets, latch keepers, and hinge plates were one-off fabrications. Our on-site welding means we fabricate what’s missing right in your driveway rather than hauling the gate off to a shop. If you’ve got a broken scroll, a torn picket, or a latch post that needs reinforcement, we weld it where it stands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fordham
For motorized and automated gates, we service nine major brands, and we keep a working stock of parts for the ones we see most in Fordham: Linear, Viking, and Ghost Controls. Whether it’s a Linear actuator that’s lost its limit switch or a Viking control board that’s glitching after a rainstorm, we can diagnose and repair without waiting a week for parts. DoorKing operators on commercial roll-downs are common along Fordham Road, and our Gate Parts & Welding team keeps the common wear items on hand for them too.
Common Gate Parts & Welding Problems We See in Fordham Homes
- Seized mortise hinges on pre-war courtyard gates. The original pin hinges on many Fordham walkups haven’t been lubricated in decades. Freeze-thaw cycles force water into the pin joint, the rust seizes the barrel, and the gate stops swinging. Repair requires heat, cutting, and re-welding new hinge plates.
- Sagging shared driveway gates. The hinge post shifts or the welds at the hinge plate fatigue, and the gate drags on the walk. On shared driveways and rights of way, a sagging gate also becomes a liability because tenants can’t safely open and close it. We correct the sag by re-plumbing the post, not by shimming the panel.
- Worn gate rollers on slide gates in tight lots. In tight Fordham lots, a swing gate often can’t fit, so sliding gates carry the load. Slide gate rollers wear quickly when the track is narrowed or the gate is hit repeatedly. We replace rollers, clean and true the track, and adjust the rack and pinion so the gate doesn’t bind.
- Bent guide rails on Fordham Road commercial roll-downs. Roll-down and scissor gates on commercial storefronts absorb daily hits from hand trucks, delivery carts, and foot traffic. Guide rails bend, gate rollers flatten, and the curtain starts jamming. We straighten or replace guide rails and get the gate running so the store can close on schedule.
Pricing for Gate Parts & Welding in Fordham, NY
A hinge replacement on a standard wrought-iron pedestrian gate in Fordham typically runs $220-$420, depending on whether we can adapt existing plates or need to fabricate new ones from scratch. Post replacement with welding runs $380-$700, including cutting out the old section and re-plumbing the new post. Custom welding work on a gate panel, scroll, or bracket is usually $180-$350 per weld location, based on access and the amount of steel we’re replacing. Gate roller replacement for a slide gate runs $160-$320 for parts and labor, and commercial roll-down track repair on Fordham Road storefronts starts around $350 and goes up with damage extent.
You’ll know the price before we start. The quote is agreed upfront, in writing, and it doesn’t change at the door. Estimates are free, there’s no trip charge inside the county, and we’ll take $40 off any repair over $200. Call (877) 610-2993 and get a real number from a real person.
We Also Serve Cities Near Fordham
Our Fordham crew also runs calls into Kings Bridge, Spuyten Duyvil, Morris Heights, and University Heights. If you’re a few blocks over the line, you’re still in our service area. See how we approach Gate Parts & Welding in Fordham differently, and you’ll understand why neighbors in the surrounding Bronx ZIPs call us too.
Serving Fordham, NY - Our Local Coverage Area
We’re based in the Fordham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Fordham
The original mortise-style pin hinges on Fordham’s pre-war courtyard gates have been out of production for decades, so there’s no direct replacement part to order. The fix requires either custom fabrication to replicate the original hinge dimensions or welding new hinge plates onto the existing post and frame. That’s welding work, not a parts swap. Call (877) 610-2993 for an estimate, and we’ll tell you which route your gate needs before we touch it.
Yes. We work on one section at a time and keep the driveway passable throughout the repair. On East 189th Street near the Grand Concourse, we repaired a sagging wrought-iron courtyard gate on a 1930s walkup where the original mortise pin hinges had seized from decades of road salt and freeze-thaw. Our crew welded new hinge plates onto the existing hinge post, corrected the sag by re-plumbing the post footing, and restored smooth swing operation without closing the shared driveway to tenants for more than an hour.
Freeze-thaw cycles force water into every pin joint, bottom-rail track, and roller housing on your gate. When that water freezes, it expands and accelerates rust, which seizes rollers and causes slide gates to bind. Road salt kicked up from heavily trafficked streets like Fordham Road and Webster Avenue makes it worse. In tight Fordham lots where slide gates carry the load, roller replacement and track cleaning are usually needed more often than in lower-traffic neighborhoods. Call us for a free look before the next freeze.
Sag correction starts at the hinge post, not the panel. We re-plumb the post, repair or replace the hinge plates, and re-weld any fatigued connections so the gate hangs square again. In Fordham’s pre-war buildings, this often means working around concrete aprons and shared courtyard entry points that can’t be torn up. A gate sags in the hinge post, not in the middle, and that’s where we start.
Yes, and that’s actually the defining feature of gate work in this ZIP. Fordham sits at the intersection of a busy commercial strip on Fordham Road and densely packed pre-war residential blocks, so we move from a seized courtyard gate on one block to a bent roll-down guide rail on the next in the same afternoon. Our trucks are stocked for both. Call (877) 610-2993, and we’ll have the right tools and parts on board when we pull up.
If your gate is sagging, seized, or failing, don’t let it get worse. Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. The person who answers is the person who shows up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fordham since 2001.