Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Federal Way
Gate parts and welding in Federal Way usually means one of three things: a hinge post has rotted out, a weld has cracked on a steel gate, or an HOA wants the repair done a specific way. We handle all three, and we handle the HOA part before we ever touch a tool. Hal Gatewood has been welding on site since 2001, which means the gate stays in your driveway and the person doing the work is the person whose name is on the invoice. If your gate is sagging, binding, or the latch won’t catch, call (877) 610-2993 and a real person answers, day or night.
Why Gatewood Fence & Gate Is Federal Way’s Preferred Gate Parts & Welding Company
Federal Way is different from Kent or Auburn in one way that matters a lot for gate work: the HOA density. Our Gate Parts & Welding team starts every Federal Way job by checking the architectural review requirements, because we’ve seen what happens when someone doesn’t. A homeowner in Twin Lakes orders a replacement hinge post in the wrong finish, the management company flags it, and the contractor gets to do the whole job twice. We don’t do that to people.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal Gatewood’s name is on the shop and on every invoice. When a Federal Way customer calls, they get a live person around the clock, not a voicemail and not a call center. And every job, from a simple latch replacement to a full custom weld, carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. That’s it.
Our Gate Parts & Welding Services in Federal Way
Hinge Replacement
In Federal Way’s wet, overcast climate, a hinge that’s exposed to constant moisture corrodes fast. We replace hinges on wood and steel gates throughout 98003 and 98023, matching the HOA-required finish when one applies. Most hinge replacement jobs in Federal Way run $185-$340, including hardware and labor. A gate that sags at the hinge post is a hinge problem, not a panel problem, and we fix the cause, not the symptom.
Post Replacement
Federal Way’s clay-bearing glacial-till soils heave post footings every winter. That’s the number one reason gate posts lean and pull out of alignment across 98063 and 98093. We dig out the old footing, pour a new one set below the frost line, and set the post true. A typical wood post replacement in Federal Way runs $350-$600, depending on depth and whether concrete removal is involved. In the Twin Lakes area specifically, we coordinate the finish and material selection with the management company before ordering, because those covenants specify what the post has to look like.
Rail Repair
Gate rails take abuse on two fronts in Federal Way: moisture from the bottom edge and freeze-thaw cycles that work the fasteners loose each winter. When a rail splits or the fasteners pull out, the gate loses its structure and starts racking. We repair rails by removing the failed section, treating the surrounding wood or steel for longevity, and welding or re-framing as needed. Rail repair in Federal Way typically runs $150-$320. If the rail failed because the post moved, we address that first, because fixing the rail without the post means you’ll fix it twice.
Custom Welding
Custom welding covers a lot of ground: cracked steel gate frames, broken hinge brackets, fabricated height extensions for HOA compliance, and gate closer mounts that have snapped off. We weld on site, in your driveway, so you can watch the repair happen and know exactly what was done. Custom welding in Federal Way runs $120 per hour plus materials, with most single-bracket or crack repairs coming in between $180 and $375 total. If the gate has to match a community-standard finish, we document the weld and the finish before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Federal Way
We service gate operators and hardware from Linear, Ghost Controls, and DoorKing, and we stock common replacement parts for Federal Way jobs so you’re not waiting on a distributor three states away. Whether the issue is a failed hinge bracket, a gate roller that’s ground flat, or a latch that won’t catch, we carry or can quickly source what’s needed. If your gate operator is over ten years old and failing, we’ll tell you honestly whether a repair makes sense or whether replacement is the smarter call. We don’t push new equipment just to pad an invoice.
Common Gate Parts & Welding Problems We See in Federal Way Homes
- Hinge-post rot in HOA cedar gates. Federal Way’s planned subdivisions built in the 1980s and 1990s used a lot of cedar, and under dense tree canopy that cedar stays wet for weeks. We regularly see hinge posts rotted at the base while the midspan boards still look usable.
- Post heave from glacial-till soil. Federal Way’s clay-heavy soil absorbs winter rain and swells, pushing footings up and out of line. A hinge post that’s moved half an inch changes the gate geometry enough to bind the latch and drag the panel.
- Moss and moisture corroding exposed hardware. Spring closers, hinges, and gate wheels sit in damp shade and rust faster here than in drier suburbs to the east. We clean, lubricate, or replace them as needed, and we use corrosion-resistant finishes where HOA rules allow.
- HOA finish mismatches. In communities like Twin Lakes, a hinge or welded bracket that doesn’t match the approved color or material will get flagged by the management company. We verify the spec before ordering so you don’t eat the cost of a redo.
Pricing for Gate Parts & Welding in Federal Way, WA
Hinge replacement in Federal Way typically runs $185-$340. Post replacement ranges from $350-$600 depending on depth, concrete work, and HOA finish requirements. Custom welding runs $120 an hour plus materials, with most repairs landing between $180 and $375. Gate roller and latch replacement usually sits between $95 and $210. The price you get on the phone is the price you pay at the door, and it’s agreed in writing before any work starts. We never add a surprise line item at the end. Call (877) 610-2993 for a free estimate. We’re happy to come out, look at the gate, and give you a number you can actually plan around.
We Also Serve Cities Near Federal Way
If you’re just outside Federal Way, we cover the surrounding communities as well: Lakeland North, Lea Hill, Auburn, and Lakeland South. Since we’re based in the metro area, we can generally reach Federal Way and these nearby cities quickly. Learn more about our local coverage by visiting Gate Parts & Welding in Federal Way.
Serving Federal Way, WA - Our Local Coverage Area
We’re based in the Federal Way area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Federal Way
Yes, in most Federal Way planned communities you need architectural review approval before changing a gate post, hinge finish, or any visible hardware. Twin Lakes and similar HOA-governed subdivisions have covenants that specify materials, colors, and finishes, and skipping that step can mean a costly tear-out. We handle the approval coordination with your management company as part of the job, including submitting the finish specs and documentation before we order anything. Call (877) 610-2993 and we’ll walk you through the specific requirements for your community.
Because the hinge post sits in the wettest part of the installation: the base, where water pools against the footing and capillary action draws moisture up through the end grain. Dense tree canopy on Federal Way’s wooded lots blocks drying, so the post can stay saturated for weeks. The midspan boards dry faster because they’re exposed to more airflow. We replace the post with proper drainage and, where HOA rules allow, a treated or steel post that resists the same failure mode. Call (877) 610-2993 to have us take a look.
Yes, we match HOA-required finishes on custom welds and hardware. We document the community standard before we start, whether that’s a specific powder-coat color, a galvanized finish, or a particular hinge style. The weld itself is done on site, and the finish is matched and applied so the repair blends with the rest of the gate. If your management company needs submittal documentation, we provide that as part of the job. Call (877) 610-2993 and we’ll confirm the requirements for your community.
We handle the coordination directly with your property management company. You give us the management contact and your community’s architectural guidelines, and we submit the material, color, and finish specs for approval before we order anything. That keeps you out of the back-and-forth and makes sure the work won’t get flagged later. We’ve done this many times in Federal Way’s HOA communities, and the process is usually quick when the paperwork is complete. Call (877) 610-2993 and we’ll get it started.
Hinges and exposed steel hardware fail fastest in Federal Way, because the wet, overcast climate accelerates corrosion even when the wood still looks sound. Wood follows closely, especially at the post base where rot sets in under saturated conditions. Gate operators generally last longer than hardware, but moisture ingress in the control board and limit switches shortens their life compared to drier climates. We recommend checking your hinges and posts every fall before the heavy rain season hits. Call (877) 610-2993 for a no-charge inspection.
Contact Gatewood Fence & Gate in Federal Way
If you need gate parts or welding in Federal Way, call (877) 610-2993. A real person answers, any hour, any day. We’ll ask what the gate is doing, tell you what we think over the phone, and set a time to come look if you want. The estimate is free, the price won’t change at the door, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s the kind of accountability you can actually verify.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Federal Way since 2001.