Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Farmington Hills
Most gate repairs in Farmington Hills come down to the same thing: metal that’s been pushed out of place by Michigan winters. Whether it’s a hinge post heaved out of plumb on a custom estate off Orchard Lake Road or a latch that won’t catch on an HOA entry gate near Northwestern Highway, the fix usually involves cutting, welding, and re-squaring what’s already there rather than tearing it all out. That’s what we do at Gatewood Fence & Gate. Hal Gatewood has been welding gates on site since 2001, and our Gate Parts & Welding crew serves Farmington Hills with same-day response for most repairs. Call (877) 610-2993 and a live person picks up. No voicemail, no queue.
Why Gatewood Fence & Gate Is Farmington Hills’s Preferred Gate Parts & Welding Company
Farmington Hills has more custom ornamental driveway gates than most cities in Oakland County, which is why Gate Installation in Farmington Hills remains a core part of our business. That’s not an accident. The late-1980s through 2000s building boom put hundreds of wrought-iron and aluminum automated gates on executive subdivisions across 48332, and those gates are now 20 to 35 years old. They’re tired. Hinge posts have shifted, operator boards have corroded, and the original hardware was often sized wrong for Michigan frost. We’ve spent years repairing exactly these gates, and the local failures we see are consistent enough that we can usually tell a homeowner what’s wrong before we even pull into the driveway.
Our customers in Farmington Hills know Hal by name. Not because he’s on a billboard, but because he’ll hand you his cell number and answer when you call. The shop has a published address, license number anyone can check, and the same owner since 2001. When we say we’ll show up, the person who shows up is Hal or one of his long-time crew. The 90-Day Done Right Promise is stamped in writing on every invoice. If the weld cracks or the hinge drifts, one call brings us back. No runaround. We also answer the phone around the clock, which matters when a gate stuck half-open at midnight leaves a Farmington Hills home exposed to Orchard Lake Road traffic.
Our Gate Parts & Welding Services in Farmington Hills
We stock common hardware for the gate brands still running across Farmington Hills, and we fabricate what we don’t stock. Here’s where most of our work goes.
Hinge Replacement
Hinges on ornamental gates in Farmington Hills take a beating from road salt spray off Orchard Lake Road and Northwestern Highway. A corroded bottom hinge is the most common reason a 300-pound swing gate starts dragging on the ground. We cut out the old hinge, weld in a new one, and re-hang the gate so it swings free. If the hinge post itself is out of plumb, we address that before the hinge, because a new hinge on a leaning post is a wasted afternoon.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Oakland County freeze-thaw cycles heave post footings out of alignment every spring. In Farmington Hills, where driveway gates are often set in poured concrete pads near the street, we regularly find posts pushed an inch or more out of plumb by April. We cut the old post at the footing, weld in a new section, and re-set it deeper than the frost line where possible. On custom estates we’ll match the original post profile so the repair doesn’t look like a patch.
Rail Repair
When a gate rail bends or cracks, it’s usually because the gate was hung on a failing hinge and someone kept forcing it. We straighten or splice the rail, weld any stress fractures, and re-align the whole frame. On aluminum gates we’ll match the alloy so corrosion at the weld doesn’t become a second failure point two years later. This is one of the repairs we see most often on older Farmington Hills estate gates that were originally built as single-piece weldments, now cracking at the corners from decades of thermal cycling.
Custom Welding
This is the work Hal enjoys most. Matching ornamental scrollwork isn’t something every shop will do, but on Farmington Hills custom estates the ironwork is often unique to that house. We weld new hinge plates, latch plates, and post caps to match the original design. We’ve fabricated replacement scroll pieces for gates made by shops that no longer exist. The weld gets ground and finished so it disappears into the original work. On a custom gate off Orchard Lake Road, we recently rebuilt a sagging ornamental swing gate after the hinge post had been pushed 1.5 inches out of plumb by repeated freeze-thaw cycles. We cut and re-welded the post footing, replaced the bottom hinge, and fabricated a new steel latch plate to match the original scrollwork, then re-squared the gate operator and photocells so it closed silently.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmington Hills
We’re certified to service nine major gate brands, and three show up constantly in Farmington Hills: Linear, Viking, and FAAC. That expertise includes Farmington Hills Gate Motor & Opener repair and replacement. Linear is the one we see most on 1990s executive-home installs. Operators from that era are at or beyond their rated service life now, and the failure pattern is predictable: limit switches that won’t hold a setting, circuit boards with corroded traces, and motors that short after a thaw cycle. We stock replacement boards, switches, and capacitors for these units locally so a Farmington Hills repair doesn’t sit waiting on a parts truck. If the unit is truly finished, we’ll say so, and show you the cost to replace it versus patch it again.
Common Gate Parts & Welding Problems We See in Farmington Hills Homes
- Frost-heaved hinge posts on custom estates. Freeze-thaw cycles push post footings out of alignment every spring, which makes gates sag, latches miss, and operators bind. April is our busiest month in Farmington Hills because the ground thaw throws gate frames out of square.
- Corroded hinges and operator housings. Road salt spray off Orchard Lake Road and Northwestern Highway accelerates rust on exposed metal. A hinge that looked fine in October can be seized solid by March.
- Failed limit switches on legacy Linear and Eagle operators. We see it constantly on 1990s-era installs. The gate opens halfway, reverses for no reason, or won’t close at all because the switch corroded over winter.
- Cracked welds on single-piece aluminum gates. Older ornamental gates in Farmington Hills were often built as one-piece weldments. Decades of thermal expansion and a couple of frost events crack the corners, and the gate starts drooping on one side.
Pricing for Gate Parts & Welding in Farmington Hills, MI
Here’s what you should expect to pay in the Farmington Hills market. A standard hinge replacement runs $180 to $340 depending on gate weight and whether we’re welding to steel or aluminum. Post replacement runs $450 to $900, and more if we’re cutting a concrete pad to re-set the footing below frost line. Rail repair runs $220 to $500. Custom welding work, like matching ornamental scrollwork or fabricating a latch plate, starts around $150 and goes up based on time and material. Every quote is given in writing before any work starts, and the price doesn’t change at the door. No trip charge inside Oakland County. $40 off any repair over $200. Seniors and veterans get 10% off, permanently. Call (877) 610-2993 for an exact number.
We Also Serve Cities Near Farmington Hills
We work throughout this part of Oakland County, including Gate Parts & Welding in Farmington Hills, plus Farmington, Novi, Livonia, and Redford. Same crew, same 90-Day Done Right Promise, same live person on the phone at (877) 610-2993. If you’re in a neighboring community with a similar estate gate, give us a call.
Serving Farmington Hills, MI - Our Local Coverage Area
We’re based in the Farmington Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Farmington Hills
Because the hinge post has been heaved out of plumb by repeated freeze-thaw cycles. Oakland County clay soil absorbs water, freezes, expands, and pushes footings around. The gate frame then sits out of square and sags toward the latch side. The fix is re-setting or replacing the hinge post and re-squaring the frame, not just adjusting the hinges. Call (877) 610-2993 and we’ll come look at it. Estimates are free.
Usually you can replace just the limit switch. We do it regularly on legacy Linear operators around Farmington Hills. If the circuit board or motor is also corroded, we’ll tell you and show you the repair cost versus a replacement unit. We don’t push a new operator when a $60 switch will get you another few years. Call (877) 610-2993 and we’ll diagnose it over the phone first.
They often require spec-matched hardware and sometimes board approval before major changes, but the parts themselves are usually standard. Shared motorized entry gates in HOA communities see far more cycles per day than private driveway gates, so commercial-grade hinges and operators wear out differently. We service both segments in Farmington Hills and can work with your HOA’s requirements, including Gate Access Control - Farmington Hills systems for shared entries. Call (877) 610-2993 to talk through what your community needs.
Test it with a soft object like an empty cardboard box. Place it in the gate’s path and close the gate. The gate should reverse immediately on contact. If it doesn’t, the safety edge or photocells have failed, and you have a serious safety hazard on your property. Do not keep using the gate. Call (877) 610-2993 and we’ll get someone to Farmington Hills right away. A gate that closes on a child or pet is the thing that keeps Hal up at night.
Yes. We regularly fabricate hinge plates, latch plates, and post caps to match custom ornamental ironwork on Farmington Hills estate gates. We’ll profile the existing scroll pattern, weld the new piece, and finish it so the eye can’t find the seam. If you want us to look at the original pattern before we quote, send photos or call (877) 610-2993 and Hal will come see it in person.
Call Gatewood Fence & Gate for Gate Parts & Welding in Farmington Hills
If your gate is sagging, stuck, or showing rust at the hinges, don’t wait for the next freeze to make it worse. Call (877) 610-2993. A live person answers, any hour. We’ll tell you what we think over the phone, then back it up in person with a written estimate before any work starts. Free second opinion on any written estimate you’ve gotten from someone else. We’ll weld it in your driveway, not haul it away. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Farmington Hills since 2001.