Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fairview Shores
Gate parts and welding in Fairview Shores usually means one of two things: a gate that won’t swing or slide right, or hardware that’s rusting apart faster than it should. At Gatewood Fence & Gate, we handle both. New hinges, rebuilt posts, rail repairs, custom welding on site. We’ve been at this since 2001, and the lake-effect moisture around Fairview Shores makes this part of Orlando different from every other neighborhood we serve. If your gate is binding, sagging, or the operator is chewing itself up, call (877) 610-2993. Hal Gatewood’s name is on every invoice, and a live person answers when you call, day or night.
Why Gatewood Fence & Gate Is Fairview Shores’s Preferred Gate Parts & Welding Company
Most gate companies in the Orlando metro want to sell you a whole new gate. We want to fix the one you have, and Fairview Shores is exactly the kind of place that matters. These 1950s and 1960s ranch homes off Edgewater Drive and Lake Fairview’s shoreline still have ironwork worth keeping. Replacing it with a box-store aluminum panel won’t match the house, and it won’t hold up half as long as a properly repaired original. Our Gate Parts & Welding crews weld on site, in your driveway, so your gate never leaves your property.
Fairview Shores customers call us because the person who shows up is the person Hal vouches for. Background-checked, uniformed, and trained on nine major operator brands including Viking, Ghost Controls, and DoorKing. But more than that, they call because the person who answered the phone at 2 a.m. is the same person who has a published shop address and a license number you can look up. Hal’s been doing this since 2001, and he lives with his reputation on every gate he touches.
Our Gate Parts & Welding Services in Fairview Shores
Here’s where the real work happens. These are the four repairs we see most on Fairview Shores gates, and how we approach each one.
Hinge Replacement
Lake Fairview’s humidity eats hinge pins. Powder-coated steel that would last fifteen years in Apopka gets rust-scale in five here. When a hinge binds or the gate starts dragging in the arc, it’s rarely the gate panel itself. It’s the pin, the bushing, or the weld at the mounting plate. We cut out the old hinge, grind the post clean, and weld in a heavier replacement with a grease fitting. On most ranch-style swing gates in 32804, that’s a half-day job and the gate swings like it did when the house was built.
Post Replacement
This is the one that matters most in Fairview Shores, and the one other companies skip. Low-lying lots near the lake flood during storm season, and standing water wicks into gate post footings. Sand and clay shift, the post heaves, and suddenly the gate is off-plumb by an inch and a half. You can hang new hinges until you’re blue in the face. The gate will still sag. We set a new post in a deeper concrete pier, let it cure, then re-hang the gate true. If your gate has sagged more than a half inch, post work is the fix, not hinge work alone.
Rail Repair
Old wrought-iron and chain-link gates on Fairview Shores’s mid-century homes get rust at the rail joints, where water sits and never dries. The top rail separates from the pickets, the bottom rail rots through, and the whole gate starts to rack. We cut out the bad section, weld in new steel or matching iron, and repaint the repair. On vintage gates where the original rail has a specific scroll or taper, Hal fabricates the replacement to match. It won’t look patched.
Custom Welding
Sometimes the part doesn’t exist anymore. A 1968 gate with a cast-iron latch mount, a steel post cap, a decorative hinge strap. You won’t find that on a shelf at Home Depot. We make it. On site, with a welder in the truck, to the dimensions of the gate we’re fixing. Custom welding is also where we reinforce old panels: adding a third rail, gusseting a sagging corner, rebuilding a hinge plate that’s torn through. If the metal exists, it can be repaired. If it doesn’t exist, we can make it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairview Shores
We work on the brands that are actually installed around here. Older Viking swing-gate operators on lakefront properties. Ghost Controls openers retrofitted onto 1960s iron gates. DoorKing slide operators on the few larger lots off Edgewater Drive. We stock common boards, limit switches, gear housings, and remote controls for these systems, so we’re not waiting three days on a shipping box when your gate is stuck open. We’re also certified on LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule, and we service them the same way: repair first, replace when it’s actually cheaper.
Common Gate Parts & Welding Problems We See in Fairview Shores Homes
- Hinge pins corroded solid from lake-effect moisture. On streets within a quarter mile of Lake Fairview, the air holds enough water vapor year-round to rust a hinge pin to its bushing. The gate still moves, but it groans and binds, and the operator motor works harder until it burns out.
- Post-heave from seasonal flooding. Fairview Shores’s lowest lots hold water around gate footings for weeks after a summer storm. Concrete bases crack, posts lean, and the gate drops off the latch side. Hinge work alone won’t fix this, and we’ll tell you that before you spend a dollar.
- Obsolete control boards in legacy Viking and DoorKing operators. These older boards don’t integrate with modern photo-eye sensors, which means the gate won’t reverse when a dog or a kid runs under it. Fairview Shores has plenty of these units still running. Retrofitting a new board with safety photocells is often under $500, far less than replacing the operator.
- Rail rot at the mid-rail joint. Chain-link gates from the 1970s rust through where the tension bar meets the rail. It looks like a hinge problem, but it’s a weld problem. We cut out the rotted section and splice in new steel.
Pricing for Gate Parts & Welding in Fairview Shores, FL
Here’s what gate parts and welding actually costs in Fairview Shores. Hinge replacement typically runs $90 to $180 per hinge, including the part and on-site welding. Post replacement with a new concrete pier runs $250 to $600 depending on depth and whether it’s a single post or a double-drive gate. Rail repair on a chain-link or iron gate runs $150 to $400, depending on how much steel we’re replacing. Custom welding starts around $80 for a simple splice or bracket and goes up based on fabrication time. These are installed ranges, quoted before we touch the gate. We don’t start work until you approve the price, and the price doesn’t change at the door. Seniors and veterans take 10% off, and any repair over $200 takes $40 off. No trip charge inside Orange County. Call (877) 610-2993 for a real number on your gate.
We Also Serve Cities Near Fairview Shores
Fairview Shores is home base for this page, but our crews work the whole metro. We’re in Pine Hills, Lockhart, Maitland, and Azalea Park regularly. If your gate is in one of those neighborhoods or anywhere else around Lake Fairview, see Gate Parts & Welding in Fairview Shores or call us directly. Same crew, same 90-Day Done Right Promise.
Serving Fairview Shores, FL - Our Local Coverage Area
We’re based in the Fairview Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Fairview Shores
Fairview Shores sits directly on the shores of Lake Fairview, and the constant near-lake humidity wrecks gate hardware faster than inland neighborhoods. Hinges, latches, operator gear housings, and even powder-coated aluminum corrode two to three times faster here. The lake-effect moisture behaves like a salt-less marine environment, and it works on your gate every single day. Clean, grease, and paint the steel once a year, and call (877) 610-2993 if you see rust-scale on load-bearing parts like hinge pins or gate rollers.
If the gate has sagged more than a half inch, it’s almost always the post, not the hinge. On a 1950s ranch-style home off Edgewater Drive, we re-set two original wrought-iron swing gates whose posts had heaved from repeated flood saturation. We re-set both post footings with concrete piers, replaced the corroded hinges, and welded new steel reinforcement into the sagging rail, leaving the gate plumb and swinging as smoothly as the day it was hung. Hinge replacement alone would have lasted one wet season. Call (877) 610-2993 and we’ll tell you honestly which one you need.
Yes, in most cases. A new control board with photocell inputs is the difference between an operator that stops when a car pulls in and one that keeps pushing. Retrofits on legacy Viking and DoorKing units typically run $300 to $600, which is far less than a $1,800 to $3,200 replacement operator. If the motor itself is sound, retrofitting is the smarter spend. We’ll test the motor, the clutch, and the limit switches before recommending anything.
No. A leaning post is a footing problem. The post itself is probably fine. Fairview Shores’s low-lying lots hold stormwater around gate footings, and the concrete base shifts when the ground swells. We dig out the old footing, set the post in a new concrete pier that goes below the soil’s movement zone, and re-hang the gate. Sometimes we weld a reinforcing collar onto the post base if it has rusted thin at grade. Call (877) 610-2993 for a free estimate.
For new steel in this climate, we grind the weld smooth, coat it with cold galvanizing compound, then prime and paint with an oil-based enamel. On lakefront properties within a few blocks of Lake Fairview, we recommend re-painting every two years and hitting the hardware with a lanolin-based corrosion inhibitor once a season. The moisture here never quits, but your gate steel can keep up if you stay ahead of it. We’ll leave you with clear instructions after every weld repair, and if it rusts through within 90 days, the Done Right Promise brings us back at no charge.
Call Gatewood Fence & Gate for Gate Parts & Welding in Fairview Shores, FL
Your gate needs a person who can weld, not a phone menu. Hal Gatewood has been fixing gates since 2001, and his name is on the shop, the truck, and every invoice. If you live in Fairview Shores and your gate is binding, sagging, rusting, or the operator won’t run, call (877) 610-2993. A live person answers 24/7. We’ll show up, diagnose the real problem, quote a price you can see before we start, and fix it right. If it’s not done right, the 90-Day Done Right Promise means one call brings us back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.