Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fairlawn
Gate parts and welding in Fairlawn usually means one of three things: a frost-heaved post that has thrown the gate out of plumb, a hinge that has seized or sheared, or a legacy opener from the 1990s that has finally given up. Most repairs run $180 to $650 depending on what actually failed, and we can usually have a Fairlawn gate swinging straight again the same week. Call (877) 610-2993 and a live person answers, day or night.
If you live off Ghent Road, Market Street, or Smith Road, you already know what Summit County clay does to a gate post every March. We have been welding and replacing hardware on those gates long enough to know what we will find before we even pull into the driveway. That local knowledge is the difference between a repair that holds and one that gets redone in eighteen months.
Why Gatewood Fence & Gate Is Fairlawn’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. When a Fairlawn homeowner calls about a sagging ornamental iron gate, they are not talking to a national call center. They are talking to the person who will either show up himself or send one of his own crew. That matters in a suburb like Fairlawn, where the houses are older, the gates were often custom-built, and the person doing the welding needs to understand how a 1980s era footing behaves in glacial till.
Fairlawn homeowners tend to do their homework. They check license numbers. They want to know the address is published and the owner will be at the hardware store next week. That is the oldest accountability there is, and it is how we operate. We answer the phone around the clock with a real person, not a voicemail or a chatbot, and we stand behind every weld and every replaced hinge with our 90-Day Done Right Promise in writing. If it is not done right, one call brings us back.
We serve the entire 44334 ZIP code, including neighborhoods along Ghent Road, Ridgewood Road, and the residential streets branching off Smith Road. Response time to Fairlawn is typically same-day for emergencies and within a day or two for scheduled welding and post work.
See how our approach fits into the broader Gate Parts & Welding line of work we do across the region.
Our Gate Parts & Welding Services in Fairlawn
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Fairlawn’s freeze-thaw cycles put enormous shear force on hinge pins, especially on gates facing I-77 and SR-18 where road-salt drift accelerates galvanic corrosion. We replace worn Gatehouse, Elite, and custom iron hinges on site, often welding reinforcement plating onto the post face so the new hardware has something solid to bite into. A typical hinge replacement in Fairlawn runs $180 to $380 per hinge, including hardware and labor.
Post Replacement
This is the single most common repair we perform in Fairlawn. Older installations from the 1980s and early 1990s frequently used concrete footings that do not reach Summit County’s 42-inch frost line. Come late winter, the clay expands, the post lifts, and the gate binds or the latch stops lining up. We dig the old footing out, re-pour below the frost line with proper drainage gravel, and set the post plumb. In Fairlawn, post replacement typically costs $450 to $1,200 depending on post size, gate weight, and whether the gate is automated. Fix the post without reaching the frost line and you will fix it twice.
Rail Repair
Wrought-iron rails crack at the weld joints over time, and Fairlawn’s temperature swings do not help. A rail that flexes every day will eventually fatigue and snap, usually at the top or bottom of the hinge stile. We weld rails in place rather than hauling the gate off to a shop, which saves Fairlawn homeowners the cost of a crane or trailer. Rail repairs run $150 to $400 per rail depending on the extent of the crack and whether the pickets need reinforcing.
Custom Welding
Not every Fairlawn gate can be repaired with off-the-shelf parts. Some were custom-built to match the house, and the original fabricator is long gone. We handle true custom welding on site: rebuilding rotted gate frames, fabricating replacement pickets to match 1960s colonial ironwork, adding stiffeners to sagging panels, and reinforcing posts that cannot be fully replaced without tearing up mature landscaping. Custom welding in Fairlawn generally runs $300 to $900 per project, quoted and agreed before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairlawn
We are certified to service nine major gate brands, and on Fairlawn properties we work on Viking, Ghost Controls, and DoorKing operators more than anything else. Those 1990s and early 2000s installations are reaching the end of their service life, and we stock replacement boards, limit switches, and safety edges locally so we are not making Fairlawn homeowners wait a week on a shipping label. If you call about a dead operator, tell us the brand and the approximate age and we will bring the right parts on the first trip.
Common Gate Parts & Welding Problems We See in Fairlawn Homes
- Frost-heaved posts from shallow footings. Fairlawn’s clay-heavy glacial-till soils expand through repeated freeze-thaw cycles, torquing posts out of plumb every late winter. A post that moves one winter will move again the next unless the footing goes below the 42-inch frost line.
- Corroded hinge pins from road-salt drift. Gates facing I-77 and SR-18 collect airborne salt all winter. Iron hinge pins oxidize, seize, and eventually shear, leaving a gate that drags or will not latch.
- Obsolete opener boards with no available parts. The 1990s development boom around Fairlawn means a lot of legacy operators still in service. Their limit-switch contacts corrode from decades of moisture intrusion and cannot be adjusted, forcing full operator replacement.
- Missing safety entrapment protection. Show us a gate closing on its own and we will show you where it is failing. Many gates installed before modern UL 325 standards went into effect have no photocells or reverse edges. We add them on nearly every Fairlawn retrofit we do.
Pricing for Gate Parts & Welding in Fairlawn, OH
Here are the ranges we see in Fairlawn week to week, based on the work we quote across the 44334 ZIP code. A hinge replacement on an ornamental iron gate runs $180 to $380 per hinge. Post replacement with a properly dug footing below the frost line runs $450 to $1,200. Rail welding runs $150 to $400 per rail. Full custom welding or gate frame rebuilding lands between $300 and $900. The price we quote on the phone or at the gate is the price on the invoice. We do not add trip charges inside Summit County, and every estimate is free. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off the total. Call (877) 610-2993 and we will give you an exact number for your gate.
On Ghent Road, our crew reset a severely heaved hinge post on a 1990s ornamental iron swing gate and found the original footing only 30 inches deep. We re-poured the post footing below the frost line, installed a new Gatehouse hinge, and added a safety photocell since the old operator lacked entrapment protection. That is what we mean by doing it once and doing it right.
We Also Serve Cities Near Fairlawn
From our work across Fairlawn, we regularly run calls into Montrose-Ghent and Copley along SR-18, up into Cuyahoga Falls, and down through Akron’s northwest side. If you are close to the border, you still get the same live-answer phone, the same 90-Day Done Right Promise, and the same owner-operated crew.
Serving Fairlawn, OH - Our Local Coverage Area
We’re based in the Fairlawn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Fairlawn
Because the original footings do not reach Summit County’s 42-inch frost line. Fairlawn’s clay-heavy glacial till expands hard during freeze-thaw cycles, and any footing poured shallower than that will lift each winter, shift the post, and knock the gate out of alignment by March. The permanent fix is digging the old footing out and re-pouring below the frost line with proper drainage gravel. Call (877) 610-2993 for a free post assessment.
Only if the post itself is still plumb and solid. A gate sags in the hinge post, not in the middle, and welding a sagging panel to a bad post wastes your money. We can often reinforce a sound post with welded plating and a new hinge, which runs $180 to $380. If the post has heaved, it needs to be reset or replaced, and that is $450 to $1,200 in Fairlawn. We will tell you which one you actually need.
Look for photocells or a reversing edge at the pinch points. If your 1990s or early 2000s operator closes on contact without a safety device stopping it, it does not meet current UL 325 standards and could injure a child or pet. Fairlawn homes built during that era almost always lack these protections. We can retrofit a photocell and safety edge onto most legacy openers for $250 to $450, or replace the operator entirely if the board has failed. Estimates are always free.
On ornamental iron gates near Ghent Road, MIG welding with proper surface prep holds up best because it gives a clean, strong weld without burning through the thinner picket stock common on 1960s-1990s Fairlawn ironwork. Road-salt drift from SR-18 means we also recommend zinc-rich primer and repainting the welded area within days, not weeks. Most rail and picket welds run $150 to $400.
If the limit-switch contacts are corroded and the board is obsolete, replacement is usually cheaper in the long run. Legacy operators from the 1990s often cannot be adjusted back to safe operation, and chasing parts for a discontinued board costs more than the operator is worth. A full operator replacement on a Fairlawn single swing gate runs $700 to $1,500 installed, and we will give you that number in writing before any work begins. Call (877) 610-2993 and tell us the brand and age of your unit.
If your Fairlawn gate is sagging, binding, or failing to close, call (877) 610-2993. We will give you an honest read on what broke, what it costs, and whether it is worth fixing. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fairlawn and surrounding communities since 2001.