Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across East Shoreham
Gate hardware fails faster along the North Shore than almost anywhere else in Suffolk County, and East Shoreham sits right on the front line of that salt air. Hinges pit, posts rust through at the base, welded joints bloom with corrosion, and operator circuit boards die over a single winter in an unheated seasonal home. That is not a theory. It is what we see every spring when the season-opener calls start coming in. Hal Gatewood has been fixing gates since 2001, and our Gate Parts & Welding crew welds on site, in your driveway, so the gate never leaves your property. If your gate is sagging, dragging, seized, or dead, call (877) 610-2993. A live person answers, and we will tell you straight what the repair needs before we quote a number.
Why Gatewood Fence & Gate Is East Shoreham’s Preferred Gate Parts & Welding Company
Most gate companies in Suffolk County would rather sell you a new gate than repair the one you have. We would rather weld it. That is the whole difference. Hal has been running Gatewood Fence & Gate since 2001, and his name is on the shop and every invoice. Our address is published, our license number is available to anyone who asks, and the person who quotes the job is the same person who shows up to do it. Gate Installation in East Shoreham is what homeowners have told us they need for years: they are tired of national outfits that quote one price on the phone and a different one at the door, then send a subcontractor who has never seen a salt-corroded hinge post. That is not how we work.
Response time to East Shoreham is usually same day or next morning. We do not make you wait three days for a gate that will not close, because a gate stuck open on a North Shore property is not a convenience issue. It is an open invitation. Our crew knows the 11786 streets, the long wooded driveways off North Country Road, and the seasonal homes that sit locked up from November to May. We have been pulling salt-bloomed operator boards and rotted posts out of East Shoreham gates long enough to know exactly what fails and in what order, which is why our East Shoreham Gate Motor & Opener repairs are done right the first time.
Our Gate Parts & Welding Services in East Shoreham
We stock or can source the specific parts that fail on Long Island Sound properties, and we weld on site. That matters because hauling a welded ornamental gate off its posts means cutting it, trucking it, re-hanging it, and hoping it still lines up. It rarely does. Here is what we handle most in East Shoreham.
Hinge Replacement
Hinges on North Shore gates fail from the inside out. Salt mist settles into the pin and barrel, and within two or three seasons the pin is pitted and seized. In East Shoreham specifically, we see hinge pin corrosion that would take a decade inland. We replace worn hinges with stainless or hot-dipped galvanized hardware, re-shim the gate so it hangs square, and weld the new hinge plates to sound steel rather than bolting them to metal that is already thinning. A gate that starts to drag is telling you the hinge is failing. Fix the hinge before the post goes with it.
Post Replacement
The gate post is the foundation of the whole system, and in East Shoreham it is usually the first thing to rot. Salt spray and snowmelt pool at the base, rust works through the galvanizing, and the post folds or the weld at the footing lets go. We dig the old post, set a new one below frost line in a proper concrete footing, and weld the hinge plates back on with stainless fixings. If the gate panel is still sound, the post replacement saves thousands versus a full gate replacement. Hal’s rule applies here: fix the post without the panel and you will fix it twice. Set the post right the first time.
Rail Repair
Ornamental iron drive gates along the Sound develop pinhole rust in the horizontal rails within two or three seasons. It starts small, then the freeze-thaw cycle splits the rail at the weld, and the gate visibly sags in the middle. We cut out the rotted section, weld in new steel, and reinforce the joint so the repair outlasts the original. If the rail is too far gone, we fabricate a matching section from scratch. The gate stays in your driveway the whole time.
Custom Welding
Not every fix is a standard part. Bent brackets, broken decorative scrollwork, shifted gate frames, cracked operator mounting plates. If steel is broken, we can usually weld it back stronger than it was. Hal has been welding gates since 2001, and the machine comes to you. For East Shoreham properties with custom ornamental gates, that means no disassembly, no flatbed truck, and no week-long wait for a shop that may not even take small welding jobs. We do the small jobs. That is most of what we do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Shoreham
We service and stock parts for Gate Access Control in East Shoreham systems from the brands homeowners actually have on their driveway gates, including FAAC, BFT, Linear, and Viking. If your opener is a LiftMaster, Death Star, or Mighty Mule, we handle those too. The salt-air issue is not brand-specific, but the repair is. A Linear board that corroded over winter in a seasonal home needs a specific replacement, not a generic workaround. We keep common boards, arms, and safety edges on the truck or get them to East Shoreham within a day or two. Same-day welding, fast parts turnaround, and no “we’ll have to order it and call you back in three weeks.”
Common Gate Parts & Welding Problems We See in East Shoreham Homes
- Hinge posts rusted through at the base. Salt spray and snowmelt pool where the post meets the concrete. The post corrodes from the outside in, the gate sags, and by spring it is dragging a groove into the driveway. We cut out the rotted post, set a new one below frost line, and weld the hinges back with stainless fixings.
- Welded joints separating on ornamental iron gates. Pinhole rust starts at the weld, the freeze-thaw cycle opens it up, and the rail peels away from the upright. Two or three seasons is all it takes on a Sound-front property. We weld the joint, reinforce it, and treat the area to slow the next round of corrosion.
- Operator circuit boards dead at season-open. Seasonal homes in East Shoreham sit unheated from November to May, and the salt-mist air does the rest. Boards, capacitors, and limit switches corrode quietly all winter. Spring arrives and the gate will not move. We diagnose whether it is the board, the arm, or the power supply, and replace only what is actually dead.
- Slide gates jumping the rack after ground thaw. Freeze-thaw heave in East Shoreham shifts the gate’s concrete track or rack a fraction of an inch each winter. By April the slide gate skips teeth or binds. It is rarely a new gate problem. It is a re-level-and-reweld problem, plus sometimes a new rack section or a stronger post anchor.
Pricing for Gate Parts & Welding in East Shoreham, NY
Here are real numbers from our East Shoreham jobs, not a national price sheet. Hinge replacement on a standard double driveway gate usually runs $220 to $480 per hinge pair, depending on gate weight and whether we need to re-shim the frame. Post replacement, including a new galvanized or stainless post, concrete footing, and welding, typically lands between $650 and $1,300 per post. Rail repair and custom welding ranges from $180 to $600, depending on how much rotted steel we need to cut out and replace. Operator board replacement on a salt-corroded FAAC or LiftMaster system falls between $280 and $550 for the board and labor. Every price is quoted and agreed before we touch the gate. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near East Shoreham
Our Gate Parts & Welding in East Shoreham crews regularly cover Rocky Point, Wading River, Ridge, and Sound Beach. Same response time, same on-site welding, same upfront pricing. If you are a mile over the line in any direction, call (877) 610-2993 and we will get you sorted the same way.
Serving East Shoreham, NY - Our Local Coverage Area
We’re based in the East Shoreham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in East Shoreham
East Shoreham sits directly on the North Shore of Long Island Sound, so the air carries salt year-round, not just in summer. That salt settles on hinge pins, barrels, and welded joints and starts pitting the steel within months. Centereach is far enough inland that the salt concentration drops dramatically. A hinge that lasts eight or ten years in Centereach may be seized and pitted in East Shoreham in three. The fix is stainless or hot-dipped galvanized hinge hardware, not just any replacement hinge. Call (877) 610-2993 and we can tell you what is on your gate now and what will actually hold up on the coast.
Usually yes, and for a specific reason. Standard mill-galvanized posts in East Shoreham rust through at the base in five to eight years because salt spray and snowmelt concentrate the corrosion right at the footing line. A stainless post costs more upfront, roughly $180 to $350 extra per post depending on size, but it will outlast the gate. If the gate itself is in good shape, the post upgrade is the difference between a one-time repair and a recurring spring ritual. We quote both options before we start, and you decide based on real numbers, not a guess. Call (877) 610-2993 for a free measure and written estimate.
In almost every East Shoreham case we see, it is a salt-air and condensation failure, not a manufacturer defect. Boards in unheated seasonal homes sit in damp, salty air from November to May, and the corrosion shorts the board before the gate runs again in spring. Some brands will honor a warranty if the board is less than a year old, but most will not because environmental corrosion is excluded. We diagnose the board first, tell you exactly what failed and why, and install a correctly spec’d replacement. Call (877) 610-2993 for an honest diagnosis before you waste a weekend on hold with a manufacturer.
Yes. Our crew brings the welding machine to your East Shoreham driveway and welds the gate while it is still hanging, as long as the posts are sound. Most rail breaks, cracked brackets, and scrollwork separations can be welded in place in a few hours. If the post itself is rotted, the panel has to come off to set a new post, but that is a post replacement job, not a welding job. Either way, the gate stays on your property the whole time. Call (877) 610-2993 and we will tell you which situation you have, in plain terms, before quoting anything.
It can be, but usually it is a post-and-track alignment issue first. Freeze-thaw heave in East Shoreham shifts the gate post, the track, or the rack a fraction of an inch each winter. That small movement makes the rack and pinion teeth skip under load. The fix is to re-level the track, re-anchor the post, and often re-weld the rack section where the anchor has loosened. If the gate frame itself has twisted from a corroded weld, we weld that while we are at it. Call (877) 610-2993 and our Gate Parts & Welding crew will inspect the rack, pinion, and gate frame in one visit, then quote the repair before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Shoreham and the North Shore since 2001.