Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across East Hanover
If you’re looking for gate parts and welding in East Hanover, here’s the short version: we fix the hinge, the post, the rail, or the panel right where it sits, and we’ve been doing it since 2001. That means we don’t try to sell you a new gate when your old one needs two hinges and a weld. Hal Gatewood owns the shop, answers the phone himself when he’s not under a gate, and stands behind the work with a written 90-Day Done Right Promise. Call (877) 610-2993 and tell us what the gate is doing, or not doing. We’ll tell you straight what it’ll take to fix it.
Why Gatewood Fence & Gate Is East Hanover’s Preferred Gate Parts & Welding Company
East Hanover is a two-market town. One side is the Route 10 corridor with the Novartis campus, the warehouse parks, and loading-dock sliding gates that take a beating from truck traffic all day. The other side is the split-level and ranch neighborhoods off Mount Pleasant Avenue and Ridgedale Avenue, where homeowners have ornamental driveway gates that were hung in the 1980s and now sag, bind, and creak. We work both sides, and that’s rare in this trade. Most gate companies in the area are either commercial-only or residential-only. We’re not.
When a gate fails in East Hanover, the person who shows up knows the frost heave problem in Morris County, the age of the housing stock, and the difference between a LiftMaster operator on a subdivision home and a DoorKing on a loading dock. We answer calls with a live person around the clock. No voicemail, no call center. You call, a human picks up. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in East Hanover
Most of what we do in East Hanover falls into four categories. Here’s how each one works, straight from our Gate Parts & Welding team.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. The 30-to-40-year-old ornamental gates around East Hanover’s 1960s and 1970s homes almost always fail at the hinge first. We cut off the old barrel hinges, align the gate, weld new heavy-duty hinges into position, and grind the welds so the repair disappears. Fix the panel without the post and you’ll fix it twice. We tell you if the post is sound before we touch the hinge, because on this soil it usually isn’t.
Post Replacement
Frost heave in East Hanover pushes gate post footings out of alignment every winter. Not a little: we’ve seen posts shift three to four inches upward by early March, snapping hinges and leaving swing gates dragging on the ground. The fix is a new steel post set in a 36-inch concrete footing below the frost line. We dig it, set it, plumb it, weld the hinge plates, and hang the gate. Then we set the operator limits so it closes square instead of fighting itself.
Rail Repair
Sliding gates on the Route 10 warehouse corridor wear out rails and rack teeth years ahead of rated service life. Heavy truck traffic does that. When the rack and pinion misalign, the operator strains, the rollers flatten, and the whole gate shudders. We straighten, reinforce, or replace the rail, build up worn sections with welds, and machine the surfaces back smooth. For residential cantilever gates, we also repair the bottom rails that crack from years of freeze-thaw flexing.
Custom Welding
Not every weld is a repair. Sometimes the gate was fabricated for an opening that no longer exists, or a homeowner wants a section widened, a lock box added, or a decorative element copied to match the original. We weld on site, in the driveway, so the gate never leaves your property. That’s the whole point of what we do. We fix the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Hanover
If your operator says LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule on the cover, we service it. We stock common replacement boards, limit switches, and safety components for those brands, which means we’re not waiting three days on a distributor while your gate sits open. If we don’t have the part on the truck, we source it same week. For East Hanover’s older residential operators, especially 1980s and 1990s FAAC and Linear units, we’ll tell you honestly whether the board is still available or whether it’s time to put that money toward a new operator.
Common Gate Parts & Welding Problems We See in East Hanover Homes
- Frost-heaved gate posts causing sag and bind. East Hanover’s inland Morris County position means real freeze-thaw cycling every winter. By late February, our calls are mostly swing gates that won’t close because the post moved and the operator trips its overload protection.
- Obsolete control boards on legacy operators. If your gate operator was installed when the house was new in 1992, the board is no longer manufactured. We’ll tell you what can be cross-referenced and what cannot. Sometimes an aftermarket board works. Sometimes you’re buying a new operator.
- Worn track rollers and bottom guides on commercial sliding gates. Show me a warehouse gate on Route 10 with heavy truck traffic and I’ll show you flattened rollers and chewed-up bottom guides. This is a maintenance item, not a one-time fix, and we’ll set up a schedule so the gate doesn’t tear up its own rail.
- Cracked ornamental panels and rails on 30-to-40-year-old gates. Wrought iron and ornamental aluminum gates from the 1980s were built lighter than what we’d install today. Corrosion at the welds plus decades of seasonal movement equals cracks. We weld and reinforce the weak points, and we’ll tell you when a panel is too far gone to save.
Pricing for Gate Parts & Welding in East Hanover, NJ
Here are real numbers for the East Hanover market. A hinge replacement on a standard residential swing gate runs $180 to $385, depending on how many hinges and whether the welds need build-up. A post replacement with a new steel post and 36-inch concrete footing runs $750 to $1,450 for most East Hanover driveways. Rail repair on a residential cantilever gate runs $220 to $520. Commercial sliding gate rail repairs on the Route 10 corridor run higher, often $1,200 to $2,800, because the rail sections are longer and heavier. Every price is quoted in writing before we pick up a torch, and you agree to the number before any work starts. You’ll also get $40 off any repair over $200. Estimates are free. Call (877) 610-2993 and we’ll give you a straight number.
We Also Serve Cities Near East Hanover
Our crew covers all of East Hanover and the surrounding towns. If you’re in Hanover, Livingston, Roseland, or Florham Park, the same team comes out, the same 90-Day Done Right Promise applies, and there’s no trip charge inside Morris County.
Serving East Hanover, NJ - Our Local Coverage Area
We’re based in the East Hanover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in East Hanover
You can replace just the hinge if the post itself is still plumb and solid, but on a 30-year-old East Hanover gate, frost heave has usually shifted the post footing, so a new hinge on a leaning post means the gate sags again within a year. We check the post first and tell you the truth. If the post is sound, a hinge replacement is a same-day job, usually $180 to $385. If the post moved, we quote the post replacement and tell you exactly why it’s the cheaper long-term answer. Call (877) 610-2993 and we’ll look at yours.
Because heavy truck traffic on the Route 10 corridor loads and unloads those rollers beyond their rated service life. East Hanover’s industrial parks run sliding gates harder than almost anywhere in Morris County. The fix isn’t just replacing rollers; it’s checking the rail surface, the bottom guides, and the rack and pinion alignment so the new rollers aren’t destroyed by worn components. We do that full inspection every time. We’d rather sell you one set of rollers plus a straight-and-level rail than a new set every spring.
If the board can be cross-referenced and still exists, we repair it. If the manufacturer discontinued it, we tell you that straight, and we quote a replacement operator rather than sending you $400 into a dead end. On a 1995 Linear or FAAC in East Hanover, the board is often gone, but sometimes an aftermarket retrofit board works. We check the model, run the cross-reference, and call you with options before ordering anything. Estimates are free, and you’ll know the number before we touch the gate.
It’s worth it when the crack is at a weld or a stress point we can reinforce. On a 30-year-old East Hanover ornamental gate, you’ll often get another 10 to 15 years out of a properly repaired panel. The key is grinding the cracked section back to clean metal, welding it with the right rod, and adding a reinforcement gusset where the stress concentrates. If the panel is rotted thin in too many places, we’ll say so and sell you a new infill panel instead of a repair that won’t hold. We’d rather do the job once.
Yes, if you have an automated gate operator. Current safety standards require entrapment protection like photo eyes or contact edges, and any gate installed since 2016 must also have a monitored entrapment protection device. Many of East Hanover’s legacy gates predate those rules entirely, which means the operator may not have the safety provisions it should. We can retrofit most older residential operators with photo eyes and contact edges without replacing the whole gate. It’s an easy job and it’s your legal protection if someone gets caught in a closing gate. We’ll show you exactly what your gate needs.
Call Gatewood Fence & Gate in East Hanover
The name is on the shop, and the shop is down the road. If your East Hanover gate is sagging, binding, cracking, or just plain tired, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he’ll answer or call you back personally. We quote the number before we start, we weld on site, and we give you the 90-Day Done Right Promise in writing. Free estimates, $40 off any repair over $200, no trip charge inside Morris County, and a permanent 10% discount for seniors and veterans. Call us and tell us what the gate is doing. We’ll take it from there.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Hanover since 2001.