Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dunedin
Gate parts and welding in Dunedin, FL usually means one of three things: a hinge that let go, a post that rotted or rusted through at the base, or a rail that split. Most repairs we handle here run between $180 and $520, and hinges are almost always a same-visit fix. If your gate is sagging, dragging, or seized up anywhere from the Dunedin Causeway to Skinner Boulevard, call (877) 610-2993 and we will tell you what it actually needs. Not what a national call queue thinks it needs.
Hal Gatewood has been fixing gates since 2001, and this page is built around what we actually see in Dunedin: salt air eating lower hinges from below, shared driveways that can’t be torn up, and snowbird homes where the gate sat untouched from May to October. We weld on site. We don’t haul your gate to a shop two counties away and call it “fabrication.” We fix what’s failed and leave the rest alone unless it’s about to go. That’s the whole philosophy.
Why Gatewood Fence & Gate Is Dunedin’s Preferred Gate Parts & Welding Company
We answer the phone. A live person, any hour of the day or night. Not a voicemail tree, not a call center three states away. Hal Gatewood’s name is on the shop and on every invoice, and his address is published so you can look him up before we ever set foot in your driveway. That’s the kind of accountability that matters when someone is cutting and welding on the gate that keeps your dog in and keeps strangers out.
Dunedin customers call us because we show up when we say we will, quote a price before any work starts, and stand behind the job with a 90-Day Done Right Promise in writing. If it’s not done right, one phone call brings Hal back. No runaround, no “that’s a different department.” Every job carries that promise, stamped on paper.
Being owner-operated since 2001 means the person who answers your call is the same person who knows how a Viking slide gate operator corrodes differently than a Linear swing arm. Our crew is background-checked and uniformed. We service nine major gate brands, but more importantly, we know which ones survive Dunedin’s salt and which ones don’t.
What Dunedin Homeowners Say
We’ve built a strong local reputation across Pinellas County by fixing gates the right way the first time. Homeowners around Douglas Avenue, Edgewater Drive, and the neighborhoods near Honeymoon Island keep our number in their phone because they know what a gate repair should cost and what sloppy work looks like. We’re licensed and insured, and we’ll quote the full price before we light a torch.
Our Gate Parts & Welding Services in Dunedin
Here’s what we actually spend most of our time doing in Dunedin. These aren’t vague “services we offer” paragraphs. These are the calls we get from 34697 and 34698 week after week.
Hinge Replacement
Hinge failure is the single most common gate problem in Dunedin, and it’s not even close. The lower hinge pin corrodes and shears off where brackish water sits at the post base, and the gate starts dragging and jamming on the hinge post side. We see this constantly within a few blocks of the Dunedin Causeway and the marina. The fix is straightforward: cut out the old hinge, weld in a marine-grade replacement, and reset the gate so it swings clean. Most hinge replacements in Dunedin run $120 to $280 depending on gate weight and how much of the frame has to be rebuilt where the hinge attaches.
Here’s the part that matters: we replace the hinge because the hinge failed. We don’t try to sell you a whole new gate because a $200 hinge gave out. If the rest of the gate is sound, you get a new hinge and a gate that works.
Post Replacement
Dunedin’s sandy, tidal, high-water-table soil is hard on gate posts. Original 1950s and 1960s post footings were often poured too shallow, and decades of salt and brackish water at the base have done the rest. When a post goes, the whole gate sags. You can straighten it, shim it, or brace it, but if the base is rotted or rusted through, you’ll be straightening it again before summer’s over.
Post replacement in Dunedin typically runs $220 to $480 per post, depending on whether it’s set in concrete or driven, and whether we’re matching existing fencing or starting fresh. We do it without tearing up the surrounding hardscape any more than necessary. If you share a driveway with a neighbor, we work around their schedule too.
Rail Repair
Top and bottom rails on older tubular aluminum and chain-link gates take a beating here. Salt air pits the aluminum, and once a rail splits or the welds at the corners crack, the gate loses its square and starts twisting. A twisted gate stresses the hinges, which fails the post, which fails the whole thing. Fix the rail early and you save yourself a post replacement later.
Rail repair runs $90 to $240 in Dunedin, depending on whether we’re welding the existing rail or cutting in a fresh section. We do most of it in place, in your driveway, with the gate still on its hinges. Less disassembly means less chance of something else getting knocked out of square while it’s apart.
Custom Welding
Sometimes the part your gate needs doesn’t exist anymore. The original manufacturer folded. The model was discontinued. The dimensions were never standard to begin with. That’s where our on-site welding makes the difference. We fabricate hinge brackets, latch plates, gate stops, and drop rods from marine-grade steel or aluminum right there in the driveway. You don’t wait a week for a part to ship from a warehouse, and you don’t pay freight on a part that doesn’t fit.
Custom welding jobs in Dunedin range from $85 for a small bracket to $600 for larger structural work like reinforcing a rusted post base or building a custom gate off a sketch. We’ll give you a written number before we start. You approve it, we do it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dunedin
We service and stock parts for the brands Dunedin homeowners actually have on their properties: Linear, Viking, Ghost Controls, and DoorKing among them. If your swing gate opener is a Linear actuator that’s been in salt air for eight years, we know the failure points. If your slide gate has a Viking operator that keeps tripping, we know which components corrode first and which ones are worth replacing. We keep common wear parts on the truck for Dunedin calls, so most hinge, latch, and roller repairs happen in one visit. Our Gate Parts & Welding team carries marine-grade fasteners because regular zinc-plated hardware lasts about 18 months near the Causeway. We see it all the time. We plan for it.
Common Gate Parts & Welding Problems We See in Dunedin Homes
- Lower hinge pin corrodes and shears off. Brackish water at the post base attacks the pin from below, and the gate drags and jams on the hinge post side. Owners usually notice it as “the gate got heavy all of a sudden.”
- Slide gate rollers seize on their track. Salt-laden air gets into the roller bearings and the gate binds mid-travel, which strips the rack and pinion. Once the rack strips, you’re replacing more than rollers.
- Hinge post pulls out of plumb. The original 1950s to 1970s chain-link gate posts were set in footings that were never deep enough for Dunedin’s sandy, high-water-table soil. The post leans, the gate sags, and tightening the hinges just buys time.
- Rust-through at the post base while the top looks fine. This is the Dunedin signature failure. The lower hinge and post base rot through from tidal salt exposure while the upper hardware looks serviceable. Snowbird owners see it every fall when they come back and the gate won’t swing.
Pricing for Gate Parts & Welding in Dunedin, FL
Here are straight numbers for Dunedin gate work. Hinge replacement runs $120 to $280. Post replacement runs $220 to $480. Rail repair runs $90 to $240. Custom welding runs $85 to $600 depending on the job. Slide gate roller and track repair runs $180 to $420. What moves the price: gate weight, post condition, whether we’re working on concrete or dirt, and how much has to be dismantled to reach the failed part.
You get the total price in writing before we start. Not after. The number we quote is the number you pay. We also take $40 off any repair over $200, we don’t charge a trip fee inside the county, and seniors and veterans get a permanent 10% discount. If you have a written estimate from another company, bring it over and we’ll give you a free second opinion. Call (877) 610-2993 and we’ll work up your number.
We Also Serve Cities Near Dunedin
Our crews cover Dunedin and the surrounding Pinellas County communities, including Clearwater, South Highpoint, Safety Harbor, and Largo. If your gate is a few minutes outside Dunedin proper, the same crew, the same truck, and the same 90-Day Done Right Promise applies.
Serving Dunedin, FL - Our Local Coverage Area
We’re based in the Dunedin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dunedin
The bottom hinge sits at the post base, where brackish water from tidal surges and salt-laden air collects and sits. That constant moisture attacks the hinge pin from below, and in Dunedin’s air, an uncoated steel pin can oxidize to failure in 18 to 24 months. The top hinge stays drier and looks fine, which is exactly why so many snowbird owners come back in October and find a seized lower hinge they never expected. The fix is a marine-grade hinge and pin, matched to your existing gate. Call (877) 610-2993 and we’ll tell you exactly what your gate needs.
Yes. We do this all the time in Dunedin’s older neighborhoods, especially around Douglas Avenue and Skinner Boulevard where driveways are shared and access is tight. We dig or cut out the old post base, set a new post in concrete or with a driven footing, and weld or bolt the gate back into plumb without disturbing the neighbor’s side of the driveway. The work area stays contained to your post. The price for this usually falls between $220 and $480, and the quote is yours before we dig.
The permanent fix is addressing the post and the hinge as a unit. A gate sags because the post has moved or the hinge has worn, not because the gate itself is tired. In Dunedin, that usually means a hinge post that has rusted or rotted at the base. We replace the post with a marine-grade post, set it deep enough for our sandy, high-water-table soil, and install new hinges with stainless pins. The gate then swings square and stays that way. We quote this work at $220 to $480 per post, and the job carries the 90-Day Done Right Promise in writing.
Yes. We fabricate operator mounting brackets and keypad pedestals to fit the gate you already have, rather than forcing you to replace a perfectly good gate just to add automation. We service and install Linear, Ghost Controls, Viking, and DoorKing operators, among others. The welding is done on site, the operator is wired and tested the same day, and the full installation is covered under our 90-Day Done Right Promise. Call (877) 610-2993 for a price on your specific gate and access setup.
Mostly yes. Salt-laden air from St. Joseph Sound gets into the roller bearings, the grease breaks down, and the rollers bind. Once they bind, the gate drags, which strips the rack and pinion, which turns a $40 roller job into a $400 rack and track replacement. We use sealed, marine-grade rollers on any gate within a few blocks of the Causeway or the marina, because that’s the only kind that lasts there. If your gate is binding mid-travel, call us at (877) 610-2993 before the rack strips. It’s a cheaper call today than it will be next month.
Call Gatewood Fence & Gate for Gate Parts & Welding in Dunedin
If your gate is sagging, dragging, seized, or rusted through, call (877) 610-2993. A live person answers, day or night. We’ll set a time that works for you, show up when we say we will, and hand you a written price before any work begins. Hal Gatewood has been at this since 2001, and the 90-Day Done Right Promise is on every invoice. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dunedin and Pinellas County since 2001.