Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dedham
Gate parts and welding in Dedham usually means one of two things: either a hinge post has shifted out of plumb after another Massachusetts winter, or a latch, roller, or rail has worn past the point where a bolt-on replacement will hold. In the historic neighborhoods around Dedham Square, we more often find the gate panel itself is still straight while the brick or granite pillar behind it has lost its grip on the anchor hardware. That changes the whole job. Hal Gatewood has been welding and fixing gates since 2001, and the crew at Gatewood Fence & Gate works throughout 02026 and 02027. Call (877) 610-2993 and you’ll get a live person, not a voicemail tree. We’ll tell you over the phone whether this is a one-day repair or something that needs a measured, written plan.
Why Gatewood Fence & Gate Is Dedham’s Preferred Gate Parts & Welding Company
We’re not a franchise and we don’t send a different crew every time. Hal Gatewood’s name is on the shop, his address is published, and his license number is something you can look up yourself. Dedham homeowners call us because they want to know who will be standing in their driveway. The answer is Hal, or one of the background-checked, uniformed people he works with every week. The 90-Day Done Right Promise is written on every job we do in Dedham: if it’s not done right, we come back and make it right. That’s not a slogan, it’s on the invoice.
We answer the phone around the clock, seven days a week. When you call at 6 a.m. because your gate won’t open and you can’t get the car out, a person picks up. Not a recording. Not a call center three states away. Someone who knows Dedham, knows the difference between a post issue and an operator issue, and can schedule the right kind of fix. Dispatch for Dedham runs from our Boston office, but the crew who shows up is local and works the Dedham area regularly.
Our Gate Parts & Welding Services in Dedham
Hinge Replacement
Hinges on Dedham gates take a beating they don’t take in dryer climates. Freeze-thaw cycling works the screws and anchor bolts loose inside the pillar, and before long the gate sags at the latch side even though the panel itself is fine. We replace hinges with heavier stock where the old ones were undersized, and we re-anchor the hardware into the pillar rather than simply driving a longer screw into a crumbled hole. On an ornamental iron gate in the Dedham Square historic district, the hinge is often the diagnostic key: if the top hinge has pulled forward, the pillar has moved, not the gate.
Post Replacement
This is the one that separates real gate work from parts-swapping. In Dedham’s older neighborhoods near Oakdale and around Dedham Square, many posts are original cut-granite or brick pillars set before 1920. Frost heave has spent a century nudging the footings out of level. A new post won’t fix that unless the footing is cut, adjusted, and re-set. We do that work on site, with welding where steel is involved, so a replacement post goes in plumb and stays plumb. On a shared driveway off High Street, our crew replaced a hinge post on a century-old wrought iron swing gate after years of frost heave pulled it out of line. Both neighbors needed the gate working the whole time, so we cut and welded a new post footing in place and re-anchored the original pillar’s embedded hardware without removing the gate panel. It swings clean now, and the pillar stands true for the next freeze-thaw cycle.
Rail Repair
Rails on gate systems in Dedham fail in predictable ways. Horizontal rails on ornamental iron gates corrode at the joints where cold winters have opened hairline cracks, which then hold water and rust from the inside. On sliding gates in East Dedham, the rail that carries the gate off to one side takes damage from salt, sand, and snowplow runoff. We repair and replace rails, weld cracked members where the metal is still sound, and build new rails on site when the old one is beyond saving.
Custom Welding
Some Dedham gates can’t be fixed with a bolt-on part because the original ironwork doesn’t match anything made today. That’s where custom welding comes in. We weld missing pickets back into an ornamental panel, rebuild a rusted hinge boss, or fabricate a new latch mount that matches the existing holes and profiles. On historic gates around Dedham Square, the work has to look like it was always there. Hal welds on site, in your driveway, so you can watch the repair happen on the gate that belongs to your house, not some replacement panel shipped from a warehouse.
We also handle Gate Rollers and Latch & Lock work, including slide gate rollers that bind from Charles River silt and seasonal corrosion. Our full Gate Parts & Welding team stocks the common hardware for these repairs and brings what’s needed on the first trip most of the time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dedham
We service and stock parts for nine major gate brands, and in Dedham we see a lot of Viking and DoorKing operators on the sliding gates common in East Dedham, plus Ghost Controls on post-WWII driveway gates that have been retrofitted for automatic opening. The brand matters less than the geometry of the installation and the condition of the post it hangs from. We carry or can quickly source the parts for these brands, and because we weld on site, we can make an older operator mount work on a repaired post without ripping out the whole system and starting over.
Common Gate Parts & Welding Problems We See in Dedham Homes
- Frost heave moves the pillar, not the gate. In Dedham Square’s historic district, brick and granite pillars shift a fraction of an inch every winter. The ornamental iron gate stays straight, but the hinge post is now out of plumb and the gate binds on the latch side. The fix is re-anchoring the pillar’s embedded hardware, not replacing the panel.
- Charles River flooding accelerates hardware corrosion. Low-lying properties near the river deal with seasonal flooding that leaves hinges, latches, and post hardware sitting in water or saturated soil. Slide gates bind and stick when the rail and rollers corrode faster than the rest of the system.
- Shared driveways limit working space. Dedham has a lot of shared driveways and historic rights of way where a gate has to keep working for two households while a post gets replaced. That means welding in tight quarters, keeping vehicle access open, and getting it done the same day.
- Narrow driveways force slide gate conversions. On lots where a swing gate would hit a car or a stone wall, Dedham homeowners convert to slide gates. The rail, rollers, and motor mount all have to handle New England winters, and we see a lot of rail damage from snow removal equipment.
Pricing for Gate Parts & Welding in Dedham, MA
A hinge replacement on a typical Dedham gate runs $185-$380, depending on the size of the gate and whether the pillar needs re-anchoring work. Post replacement, including cutting and re-setting the footing, typically runs $425-$950 in the Dedham market, with granite pillar re-anchoring on the higher end. Custom welding work for ornamental iron repair is usually $150-$600, quoted before we strike an arc. Slide gate roller and rail repair lands around $240-$520. Every quote is given up front and agreed to before any work starts. You know the price before we touch the gate. $40 off any repair over $200 is a standing offer, and there’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near Dedham
Our Gate Parts & Welding in Dedham service area extends to Canton, Milton, Norwood, and Westwood. If you’re in one of those towns and dealing with a gate that won’t swing, roll, or latch, call (877) 610-2993. We’ll tell you straight what it needs and what it costs.
Serving Dedham, MA - Our Local Coverage Area
We’re based in the Dedham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dedham
Because the panel was never the problem. In Dedham Square’s historic district, the brick or granite pillar loses its mortar bond around the embedded hinge anchors due to freeze-thaw cycling. The gate is fine, the pillar is the failure point. Fix the panel without the post and you’ll fix it twice. We re-anchor the hardware into the pillar itself. Call (877) 610-2993 for a free estimate and we’ll confirm what’s actually moving.
Yes, we do it regularly. The proper method is to remove the loose mortar and deteriorated anchor material, set new galvanized anchor bolts or a welded steel plate into sound stone or brick, and re-bed the hardware in a mortar mix appropriate for the age and type of the pillar. Hal welds the post mount on site so the gate stays in your driveway the whole time. Call (877) 610-2993 for a quote. Estimates are free.
Yes. We convert swing gates to slide gates, and we repair and rebuild slide gate rails and rollers that have been damaged by rock salt, snowplow runoff, or Charles River silt. The work includes setting the rail, aligning the rollers, and mounting the operator, whether it’s a Viking, DoorKing, or another brand you already own. Call (877) 610-2993 and we’ll measure and give you a written price.
We keep the gate in place and functional throughout the work whenever that’s physically possible. That means cutting and welding the new post footing in place, bracing the gate so both neighbors can come and go, and scheduling the work so the driveway is never fully blocked. Shared driveways are normal in Dedham, and we treat them as job sites where two households are counting on the gate. Call (877) 610-2993 to schedule.
We repair the whole system: the mechanical hardware, the post and hinge alignment, the rail and rollers, and the operator. Near the Charles River, flooding and seasonal saturation corrode hardware faster than the operator wears out, so the fix usually involves mechanical repairs plus corrosion-resistant hardware. One call to (877) 610-2993 gets a person who can diagnose what’s actually failing.
Call Gatewood Fence & Gate in Dedham
If your gate is binding, sagging, rusting through, or failing to open, call (877) 610-2993. Hal or someone from his crew will answer, ask the right questions, and give you an honest read on what the job will take and what it will cost. We serve Dedham, Canton, Milton, Norwood, and Westwood, and we fix gates in the driveway, not in some shop down the line. Estimates are free. The price is agreed before we start. And the 90-Day Done Right Promise is on every job in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates since 2001.