Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dearborn Heights
If you’ve got a sagging ornamental iron gate off Warren Avenue or a seized bottom hinge near Beech Daly, here’s the straight answer: most gate hardware failures in Dearborn Heights can be fixed same-week without replacing the whole gate. Hinge replacement typically runs $120-$220, post resetting runs $280-$550 depending on frost heave damage, and custom welding work runs $90-$140 per hour. We’ve been doing this work since 2001, and Hal Gatewood still answers the phone. Call (877) 610-2993 and describe what you’re seeing. You’ll get a straight answer and a real price before anyone rolls a truck.
Dearborn Heights has a lot of ornamental iron gates that were hung 20 to 30 years ago, and those gates are now failing in predictable ways. The pillars crack, the hinges torque, the salt eats the bottom hardware. We see it every week across the 48125 and 48127 ZIP codes, and we fix it in your driveway. No hauling the gate off to some shop across the county.
Why Gatewood Fence & Gate Is Dearborn Heights’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001. His name is on the shop, his address is published, and his crew works the same streets you drive every day. When a Dearborn Heights homeowner calls about a gate that won’t close or a post that’s leaning after winter, the person who answers is a real person who knows what a frost-heaved pillar looks like. Not a voicemail. Not a call center three states away.
The 90-Day Done Right Promise is on every invoice. If the weld cracks or the hinge shifts within 90 days, Hal comes back and makes it right. Plainly stated, no fine print. We also give every Dearborn Heights customer a free second opinion on any written estimate from another company, and there’s no trip charge inside Wayne County. Seniors and veterans always get 10% off. And yes, every technician is background-checked and uniformed. The person who shows up is the person you expected.
One thing Dearborn Heights homeowners appreciate: we don’t swap parts that don’t need swapping. A gate that sags at the hinge post doesn’t need a new gate. It needs the post fixed. Hal’s repair-first approach means you pay for what’s actually broken, not what’s convenient to upsell.
Our Gate Parts & Welding Services in Dearborn Heights
This is the full Gate Parts & Welding scope we bring to Dearborn Heights driveways. On-site welding means your gate stays where it belongs. The four services below cover most of what we do on brick ranches and split-levels across 48125 and 48127.
Hinge Replacement
Bottom hinges on Dearborn Heights gates take a beating from road salt brine off the driveway apron. The hinge barrel seizes, the pin welds to the bracket, and the gate starts dragging. We cut the old hinge off, weld a new heavy-gauge hinge in place, and realign the gate so it swings clean. Most hinge replacements run $120-$220, and we do the work in your driveway.
Post Replacement
Freeze-thaw cycles are the enemy here. Ground temps in southeast Michigan swing across freezing dozens of times each winter, and that heaves gate posts out of plumb year after year. When a post is too far gone to reset, we dig it out, set a new steel post in concrete below the frost line, and weld the gate hardware back on. Post replacement in Dearborn Heights typically runs $280-$550 depending on depth and concrete condition.
Rail Repair
Slide gates with rack and pinion systems suffer when a post shifts. The rack binds, the pinion grinds, and the motor works double. We straighten bent rails, weld in new sections where corrosion has eaten through, and reset the rack alignment so the gate rolls smooth instead of shuddering. Rail repair usually runs $180-$380 depending on how much rail needs replacing.
Custom Welding
Some fixes aren’t in a parts catalog. A decorative scroll breaks off, an iron panel cracks at the weld seam, a latch bracket tears loose. We fabricate and weld replacement pieces on site, matched to the original ironwork. Custom welding across Dearborn Heights runs $90-$140 per hour, and you’ll get an honest estimate of hours before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dearborn Heights
We’re certified to service nine major gate brands, and in Dearborn Heights we see a lot of older Viking and DoorKing operators on those 1990s installations, plus newer Ghost Controls and Elite units on retrofitted gates. We stock common parts for these brands locally, which means less waiting when your opener board dies. If you’ve got a legacy control board that’s no longer manufactured, we’ll tell you honestly whether a retrofit board or a modern operator is the smarter spend.
Common Gate Parts & Welding Problems We See in Dearborn Heights Homes
- Cracked pillar cap mortar. Ornamental iron gates anchored into poured-concrete pillar caps develop cracks from decades of hinge torque. The anchor plate loses grip, and the gate sags no matter how many times you adjust the hinge. We weld a new base plate and re-set the anchoring properly.
- Frost-heaved hinge posts. Winter ground movement tilts posts out of plumb. On swing gates this means dragging latches; on slide gates it means rack and pinion binding. Fix the post, not just the gate.
- Salt-corroded bottom hardware. MDOT and Wayne County DPW spread brine that ends up in your driveway. Bottom hinges, springs, and latch mechanisms seize. We replace them with sealed or heavy-gauge hardware that holds up longer.
- Obsolete operator boards. Those 1990s and early 2000s operators fail in a specific order: the board, then the capacitor, then the limit switches. We can often retrofit a modern board with safety photocells without replacing the whole unit.
Pricing for Gate Parts & Welding in Dearborn Heights, MI
Here’s what we charge in Dearborn Heights, in writing, before any work begins:
- Hinge replacement: $120-$220 per hinge, including welding and alignment
- Post replacement: $280-$550 depending on dig depth and frost line footing
- Rail repair: $180-$380 depending on how much rail needs straightening or replacing
- Custom welding: $90-$140 per hour, estimated honestly before work starts
- Gate operator retrofit with photocells: $450-$900 depending on operator size and existing wiring
Every price is quoted and agreed before we touch anything. Not an estimate that changes at the door. Not a range that balloons. And remember the standing offers: $40 off any repair over $200, no trip charge inside the county, and 10% off for seniors and veterans.
We Also Serve Cities Near Dearborn Heights
Our crews cover plenty of ground in the western metro. If you’re in Gate Parts & Welding in Dearborn Heights or the surrounding area, we also work in Garden City, Inkster, Dearborn, and Allen Park. If you’re just outside those lines, call us. We’ll tell you straight if we can get there.
Serving Dearborn Heights, MI - Our Local Coverage Area
We’re based in the Dearborn Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dearborn Heights
The hinge is rarely the real problem. On Dearborn Heights brick ranches with ornamental gates anchored into poured-concrete pillar caps, the cap mortar cracks from hinge torque, and the anchor plate loses its grip. The gate sags because the base is no longer solid, not because the hinge is loose. The fix is a new welded base plate and a re-set anchor, not another hinge tweak. Call (877) 610-2993 and describe your gate. We’ll tell you if this is the issue before we even look.
Yes, in most cases. If the operator has a functioning motor and gearbox, we can replace the obsolete control board with a modern board that supports UL 325 entrapment protection, including safety photocells and automatic reverse. The retrofit typically runs $450-$900. If the motor is also dead, replacement is usually the cheaper math. We’ll give you an honest comparison before you spend anything.
Road salt. MDOT and Wayne County DPW spreaders lay brine on the main roads, and that brine ends up on your driveway apron where the gate sits. The bottom hinge sits inches from the ground, so it gets the full salt spray. We replace corroded hinges with heavy-gauge steel and recommend a sealed bearing design that holds up longer than the original hardware.
Usually repair. The ironwork on most Dearborn Heights ornamental gates is still solid. What fails is the hardware: hinges, anchor plates, operators, latches. We repair what’s broken and leave what’s fine. If the iron itself is rusted through in multiple sections, we’ll tell you replacement is cheaper. That conversation takes two minutes and costs nothing. Call (877) 610-2993 for a free estimate.
Yes. Rack and pinion slide gates are common across the 48125 and 48127 ZIP codes, especially on wider driveways where swing gates would block the apron. Frost heave tilts the guide posts, which binds the rack and grinds the pinion. We straighten the rail, reset the posts, and re-align the rack. Most rail repairs run $180-$380.
Call Gatewood Fence & Gate for Gate Parts & Welding in Dearborn Heights
If your gate is sagging, dragging, or refusing to close, call (877) 610-2993. Hal Gatewood has been doing this since 2001, his name is on the shop, and a live person answers 24/7. The estimate is free. The price is set before work starts. And if it’s not done right, the 90-Day Done Right Promise means we come back. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dearborn Heights since 2001.