Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Cupertino
When a gate hinge tears loose or a post shifts out of plumb in Cupertino, you need a welder who shows up with the right steel and the right tools on the truck. Gatewood Fence & Gate handles gate parts and welding across Cupertino’s 95014 and 95015 ZIP codes, from the flat lots near Stevens Creek Boulevard to the hillside streets climbing toward Monta Vista. We carry replacement hinges, post stock, rollers, latches, and welding equipment on every truck, so most repairs get done in one trip, not two or three. That matters when your gate is stuck open and your driveway is the only way in. Call (877) 610-2993 and Hal Gatewood or one of his crew will answer. Not a voicemail, not a dispatch queue. A person who knows gates.
Why Gatewood Fence & Gate Is Cupertino’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is on the door, the trucks, and every invoice. He has been welding gate hinges, resetting posts, and replacing control boards in Cupertino long enough to know which neighborhoods have adobe clay and which have the original 1960s tract gates that builders installed before anyone thought about entrapment protection. That local knowledge is why our Gate Parts & Welding team gets called back for second opinions on estimates other companies wrote. A second opinion from us is free, by the way. Show us the quote and we will tell you what actually needs fixing and what does not.
Cupertino customers leave us reviews that mention the same things: we answer the phone, we show up in the window we promised, and we do not push a full replacement when a weld and a new pinion gear would do. Hal runs background-checked, uniformed crew members on every job. No subcontractors. The person who shows up is the person accountable for the work.
Every job, big or small, carries the 90-Day Done Right Promise in writing. If a hinge starts binding again or a post settles in the first three months, one call brings Hal back. No runaround, no fine print. That is the benefit of hiring Gate Parts & Welding in Cupertino from a company whose owner lives in the Bay Area and whose shop is down the road, not three states away.
Our Gate Parts & Welding Services in Cupertino
Hinge Replacement
Gate hinges fail in predictable ways in Cupertino. On wrought iron gates, the barrel of the hinge wears oval after years of opening and closing, and the gate starts to drag. On the original 1960s ranch homes around Garden Gate and Monta Vista, we still find steel strap hinges welded to concrete-filled posts that have rusted clean through. We cut the old hinge off, weld in a new one rated for the gate’s weight, and re-align the gate so it swings clean. A typical hinge replacement in Cupertino runs $180 to $340 per hinge, depending on the gate material and whether we need to reinforce the post first.
Post Replacement
A sagging gate means a failing post. That is the starting point, every time. In Cupertino’s hillside neighborhoods, the adobe clay soil heaves and contracts with the wet-dry cycle, and we pull posts that have shifted an inch or more over ten years. We dig out the old footing, set a new steel post in concrete, and weld the hinge points back on at the correct height. On flat lots near Stevens Creek, post failure is more often plain rust at ground level where sprinkler overspray kept the base wet for years. Post replacement in Cupertino typically runs $450 to $900 per post, including new concrete and the weld work to reattach your gate.
Rail Repair
Gate rails crack at weld joints, bottom corners, and wherever a vehicle backed into the gate over the years. We see all three constantly in Cupertino. For ornamental iron gates, we cut out the cracked section and weld in fresh matching steel, then grind and paint or powder-coat the repair to blend. For aluminum gates, we typically weld or plate the frame and reinforce the corner gussets. Rail repair runs $200 to $500 in Cupertino depending on how much rail length needs replacing and whether the gate has to come off its hinges to work on it safely at ground level.
Custom Welding
Sometimes the part your gate needs does not exist anymore. The manufacturer discontinued it, the original fabricator retired, and the gate is custom-sized anyway. That is where our on-site welding shop comes in. We fabricate custom brackets, gate stops, rack extensions, strike plates, and hinge plates in the truck, welded and ground to match your gate so it does not look like a patch job. Custom welding jobs in Cupertino run $150 to $600 depending on complexity and the amount of steel involved. We quote the price before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cupertino
We service and stock parts for the gate brands Cupertino’s 2000s-era boom homes actually use: Viking, Ghost Controls, DoorKing, and Elite are on our trucks right now, alongside the LiftMaster and FAAC operators we see daily in this area. If your gate operator is wired into a Lutron or Control4 system and the logic board has failed, we can replace the board and re-learn the travel limits without ripping out the whole operator. That matters when a new operator means reprogramming your entire smart-home scene. We carry the common replacement parts local to Cupertino, so we are not waiting on a shipment from a warehouse when your gate is stuck open.
Common Gate Parts & Welding Problems We See in Cupertino Homes
- Control board failure on 2000s-era operators. Repeated short-cycling from smart-home integration cooks LiftMaster and FAAC logic boards. The gate is mechanically fine but electrically dead, and the fix is a board swap, not a new motor.
- Hinge posts shifting on adobe clay. Streets climbing toward the Monta Vista foothills sit on expansive soil that moves between wet and dry seasons. A post that measures plumb in August can be half an inch out by February, which binds the gate and overloads the operator.
- Fog-belt rust on wrought iron. Cupertino’s position at the base of the Santa Cruz Mountain foothills means morning fog and dew linger longer than in flat San Jose neighborhoods. Bare steel at hinges, pivot points, and bottom corners rusts faster here than you would expect for California.
- Wooden gates swelling with the fall rains. The original 1960s ranch homes still have a surprising number of wooden driveway gates. When Cupertino’s wet season starts, the wood swells, the gate binds against the strike plate, and the operator trips its entrapment protection and refuses to close.
Pricing for Gate Parts & Welding in Cupertino, CA
Here are the numbers we actually quote in Cupertino, not a vague range meant to cover every possibility. Hinge replacement runs $180 to $340 per hinge. Post replacement runs $450 to $900 per post with new concrete. Rail repair runs $200 to $500. Custom welding runs $150 to $600. Full operator board replacement, if your smart-home-integrated gate has failed electrically, runs $350 to $850 depending on brand and whether we are dealing with Viking, DoorKing, or another system. The price we quote is the price you pay, agreed before any work starts. If a written estimate from another company has you wondering, bring it to us for a free second opinion. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount on every job we do in Cupertino.
We Also Serve Cities Near Cupertino
If you are just outside Cupertino’s 95014 or 95015 ZIP code, we work in Saratoga, Sunnyvale, Los Altos, and Mountain View most days. The same crew, the same trucks, and the same 90-Day Done Right Promise apply across the South Bay. Call (877) 610-2993 and we will tell you when we can be there.
Serving Cupertino, CA - Our Local Coverage Area
We’re based in the Cupertino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cupertino
We can often keep the 1990s FAAC operator running by replacing the failed control board and adding a modern dry-contact interface that talks to Apple HomeKit, provided the motor itself still spins freely and the gearbox is intact. The board is usually the failure point. If the motor bearings are shot or the gearbox is grinding, replacement becomes the honest answer because rebuilding a 1990s FAAC gearbox costs more than a new operator. Call (877) 610-2993 and Hal will tell you which one yours is after 15 minutes of testing.
Your hinge post or track base has shifted on the adobe clay, almost certainly. Monta Vista’s streets climb into expansive soil that swells in the winter rains and contracts in the dry summer, which moves a galvanized post just enough over ten or fifteen years to throw the rack and pinion out of alignment. The gate binds mid-travel, the operator overloads, and the entrapment protection trips. We fix it by re-setting the post footing and re-learning the operator’s travel limits, not by replacing the gate. Post re-setting in Cupertino runs $450 to $900 depending on whether we need to break out the old concrete and pour new.
In most Cupertino cases, yes. We cut out the rusted sections at the hinge points and bottom corners, weld in fresh steel matching the original profile, and paint or powder-coat the repair. The gate does not need replacing when the damage is localized. This is exactly the kind of repair-first work Hal has done since 2001, because a well-built steel gate from the 1990s has decades of life left once the rust is cut out. Custom section replacement runs $150 to $600 per section in Cupertino. Call (877) 610-2993 for a free estimate, and remember we quote the price before any welding starts.
No, a hinge repair by itself does not trigger a UL 325 upgrade requirement. The entrapment protection standard applies to the operator, not the gate’s mechanical parts. That said, if your gate is old enough that the hinges have worn out, we will check the operator’s safety edges and photo eyes while we are there. A gate that reverses properly is a gate that does not hurt someone. If the safety system is obsolete, Hal will tell you plainly what an upgrade costs, and you can decide. The 90-Day Done Right Promise covers our hinge work either way.
It depends on how much steel is left. If the corrosion is a localized hole with sound metal around it, we can weld a sleeve or gusset plate over the damaged area and reinforce the post, which buys you years at $200 to $500 instead of $450 to $900. If the post is rusted thin at the base where it enters the concrete, patching is false economy. The post is the structural point the whole gate hangs from, and a gate that falls on a car or a person is not acceptable. Hal will cut away the rust, show you the remaining steel, and tell you which choice is honest. Call (877) 610-2993 and we will put eyes on it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cupertino since 2001.