Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Converse
When a gate stops latching or a hinge tears loose in Converse, you need someone who understands the soil under that post and the cheap builder hardware that came with the house. We fix gates in this town. Not ship them off, not quote a replacement before we look. Our shop answers the phone around the clock at (877) 610-2993, and Hal Gatewood has been repairing gates since 2001. Most Converse calls get a real person on the line immediately, and we’re typically in your driveway the same day for a sagging gate or a latch that quit.
Converse has a specific problem. The clay under this part of Bexar County moves. Posts lean. Hinges tear. Automation that worked in April grinds to a halt by October. We know because we drive these streets weekly, from the older lots along FM 1516 to the newer subdivisions off Loop 1604.
Why Gatewood Fence & Gate Is Converse’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop. Not a franchise sign, not a call center three states away. You call, a live person answers, and the guy who shows up knows gates the way you know your front steps. That’s the difference Converse homeowners notice after getting burned by a national outfit that quoted one price on the phone and charged another at the door.
We’re locally owned and owner-operated since 2001, with a published address and license number you can look up yourself. Before Covid, after Covid, doesn’t matter. We’ve been here.
Local Reputation in Converse
Our Converse customers keep calling us back because we fix what’s broken instead of selling a new gate when the old one just needs a hinge. Hal gets genuinely irritated when he finds sloppy work somebody left behind. A wire-and-zip-tie latch fix on a rental gate near JBSA-Randolph? He’ll point it out, explain why it failed, and fix it right. That candor builds trust faster than any ad.
Response Time to Converse
We schedule from our metro San Antonio office and keep crews routed through Converse nearly every day. Emergency gate repairs inside Converse usually mean same-day service, especially when a gate is stuck open or refusing to latch. A sagging gate isn’t just an inconvenience. It’s a security risk. Call us and we’ll tell you honestly when we can be there.
Our Gate Parts & Welding Services in Converse
We don’t just replace hardware. We weld on site, in your driveway, so the gate stays put and the fix matches the old steel’s character. You can read about the full range on our Gate Parts & Welding page. Here’s what Converse homeowners call us about most.
Post Replacement
Converse sits on Blackland Prairie clay, and that clay is the root cause of most post problems here. Wet winters swell the soil. Baked summers shrink it. Your gate post slowly heaves, tilts, migrates out of plumb. A metal post can hide the movement until the gate starts binding against the latch or dragging on the concrete. We dig the old footing, set a new post with proper concrete and gravel drainage, and weld the new post in place. In Converse, we typically budget $380 to $750 for a residential hinge or latch post replacement, labor and materials included.
Hinge Replacement
Rental gates near Joint Base San Antonio-Randolph go through tenants like clockwork. Each PCS cycle means another set of hands on that gate, another round of “good enough” fixes. We find mismatched replacement hinges, paint over rust, brackets bolted on top of brackets. A hinge replacement in Converse runs $120 to $260 per hinge, but if the post has moved, new hinges alone won’t save you. The fix starts with the post. That’s the repair-first truth Hal will tell you straight.
Rail Repair
On a wood or wrought-iron swing gate, the rails carry the panel’s weight to the hinges. When the hinge side sags, the rail joints crack and the far corner drops. We cut out the rotted or twisted section, weld in new steel or sister new rail stock, and reinforce the corners. Most Converse rail repairs run $180 to $400 depending on the span and whether we need to match existing ironwork. We do the welding right on your driveway, no hauling.
Custom Welding
Sometimes the best fix is to fabricate the part that no longer exists. A bent hinge plate, a cracked gate frame corner, a latch mount that was never quite right from the builder. We weld custom brackets, patch panels, and reinforcements on site. Custom welding in Converse typically runs $150 to $350 for a small bracket or patch job, and we’ll quote it before we strike an arc. The price you agree to is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Converse
We service and stock parts for most major gate operators, including Viking, DoorKing, and Ghost Controls. Converse tract homes from the late nineties and two-thousands often came with builder-grade LiftMaster openers. We keep common hinge pins, rollers, and latch hardware on the truck so a Converse repair doesn’t wait on a parts shipment. If your opener is older or discontinued, our Gate Parts & Welding in Converse team can usually match a compatible replacement same week.
Common Gate Parts & Welding Problems We See in Converse Homes
- Blackland Prairie clay heaving posts: Converse’s expansive clay soils swell and contract through the seasons, gradually tilting gate posts out of plumb. The gate then binds, scrapes, and eventually tears the hinge hardware loose. We fix the footing first, not the symptom.
- Builder-grade operators failing on heavy gates: Many 1990s-2010s tract homes got the cheapest operator the builder could spec. When it torques a sagging panel, it takes out hinge brackets with it. We see this weekly in Converse subdivisions.
- Manual gates retrofitted without conduit: A gate installed manual in 2005 gets an opener added in 2015, but nobody ran conduit. The wiring sits surface-mounted, exposed to Converse’s wet winters and hard water. It fails. We re-run the power correctly.
- Layered “field fixes” on rental gates: Near JBSA-Randolph, gates cycle through four or five military tenants. Each tenant or landlord adds a quick fix, a mismatched hinge here, a zip-tied latch there. A technician arriving for one hinge often finds the entire frame needs realignment before any hardware swap will hold.
Pricing for Gate Parts & Welding in Converse, TX
You should know the numbers before you pick up the phone. A typical hinge replacement in Converse runs $120 to $260 per hinge. Post replacement with new footing runs $380 to $750. Rail repair runs $180 to $400. Custom welding runs $150 to $350 for small fabrication jobs. Full gate realignment including frame work and hardware runs $300 to $600. We quote every job before work starts, and that quote is what you pay. We offer a free second opinion on any written estimate you’ve received. If you’re a senior or a veteran, we take 10% off every job, permanently. We don’t charge a trip fee inside the county, and any repair over $200 gets $40 off. The 90-Day Done Right Promise comes in writing on every invoice. If the fix isn’t right, Hal comes back. No runaround.
We Also Serve Cities Near Converse
When our Converse crew finishes on the east side, they’re a fast drive from Converse‘s neighbors: Windcrest, Universal City, Kirby, and Live Oak. If you’re a few blocks over the line, same service, same pricing, same live person answering the phone at (877) 610-2993.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Converse
Your post leans because Converse sits on expansive Blackland Prairie clay. When the ground saturates, the soil swells and pushes the post sideways. When it bakes in summer, the clay contracts and the post settles into the new tilt. The only fix that lasts is to set a proper footing with gravel drainage and a deeper hole. Call (877) 610-2993 and we’ll tell you what the two-inch tilt on your post really means, no charge for the estimate.
Yes. If your Converse gate was installed manual and later got an opener with surface-mounted wiring, that wiring will eventually fail. We run new conduit or replace the surface run with weatherproof protection so the power and safety edges stay reliable. Our Gate Motor & Opener in Converse service typically runs $650 to $1,100 installed, and we quote it before we start. Call us for a free measure.
Maybe, but in our experience, mismatched hinges on PCS-cycled rental gates usually mean the whole frame has shifted out of square. A simple hinge swap without realigning the frame will fail again. We’ll tell you honestly if you need one hinge or a full realignment. Free estimates mean you’ll know before you spend a dollar. Call (877) 610-2993.
The most common welding repair we do in Converse is a cracked hinge plate or a broken corner weld where the rail meets the stile. After 15 to 25 years of daily use on a concrete slab that’s moved with the clay, the metal fatigues at the stress points. We weld in a reinforcement plate and the gate stiffens right up. Expect $150 to $300 for a typical corner patch.
Gate Access Control in Converse starts with a safe gate operator that has working safety photocells and a properly set reverse mechanism. If your Converse rental gate’s opener lets the gate push against a child or pet, it fails. We test the reversal force, align the photocells, and replace any switch or edge that’s worn out. A safety adjustment call runs $90 to $150 in Converse, and it’s worth every penny.
Call Gatewood Fence & Gate for Gate Parts & Welding in Converse
If your gate is sagging, refusing to latch, or the post is leaning after the last rain, call (877) 610-2993. Hal Gatewood answers the phone. We’ll schedule a free estimate, show up when we say we will, and tell you the truth about what needs fixing and what doesn’t. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Converse since founding Gatewood Fence & Gate in 2001.