Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Conley
Gate parts and welding in Conley usually means one of two things: a residential gate off a shared driveway that’s sagging on tired hinges, or a commercial slide gate at a warehouse entrance that takes a beating from truck traffic every single day. We handle both. Hal Gatewood has been repairing and welding gates since 2001, and our crew knows the 30288 ZIP well enough to plan for red-clay heave on ranch homes and anchor-bolt loosening along Moreland Avenue before we even pull up. If your gate needs hinge replacement, post work, rail repair, or custom welding in Conley, call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Conley’s Preferred Gate Parts & Welding Company
We’re a locally owned, owner-operated shop. Hal Gatewood’s name is on the business, his address is published, and his license number is something anyone can look up. That matters in Conley, where a lot of the gate work is commercial and the person managing the facility needs to know the repair crew will show up when they say they will and stand behind the weld when they’re done.
Our 90-Day Done Right Promise is stamped in writing on every job. If something isn’t right, one call brings us back, no runaround. We also answer the phone with a live person 24/7. Not a voicemail. Not an automated queue. Conley customers with a slide gate stuck open at a truck court at 6 a.m. don’t have time for a phone tree.
Every job starts with a free estimate and upfront pricing. You’ll know the number before we start, and the number won’t change at the door. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off. No haggling required. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Conley
Our Gate Parts & Welding team repairs what other companies want to replace. We weld on site, in your driveway or at your loading dock, so the gate stays where it belongs and keeps working while we work. Here’s what we do most often around Conley.
Hinge Replacement
Hinges on a Conley gate take abuse from two directions: humidity-driven rust and the constant weight shift of a panel on posts set in Georgia red clay. We stock heavy-duty hinge hardware for LiftMaster, Viking, and DoorKing systems, and we replace hinge sets without pulling the gate off its posts when that’s the safer call. A sagging gate usually starts at the hinge post, not in the middle of the panel. We start there too.
Post Replacement
Older ranch homes in Conley were built with chain-link and swing gates whose posts went straight into the clay. Forty years of wet-dry cycles will heave a post out of plumb, and if the post is out, the latch won’t line up and the panel won’t hang square. We cut out the old footing, set a new post below the clay line, and weld or bolt the gate back so it closes true on the first try. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Slide gates along the industrial corridor off Forest Parkway see high-cycle use and heavy vibration from 18-wheelers. That vibration works top and bottom rails out of alignment, which grinds down rollers and puts strain on the operator. We re-align rails, replace bent sections, and re-weld cracked joints on site. We also check the rack and pinion for wear while we’re under the gate, because a worn rack in Conley will chew through a new pinion gear in months, not years.
Custom Welding
Sometimes the part a Conley gate needs doesn’t exist on a shelf. That’s where custom welding earns its keep. We’ve fabricated replacement steel pickets, patched rusted-out frame corners, built bracing for bowed panels, and modified existing gates to accept new operator brackets. If the steel can be saved, we save it. If a section has to be cut out and replaced, we do that too, and the weld carries the same 90-Day Done Right Promise as everything else we touch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conley
We’re certified to service nine major gate brands, and around Conley we see a lot of Viking, Ghost Controls, and DoorKing equipment on both residential and commercial gates. We keep common parts for those brands on the truck: hinge sets, rollers, brackets, control-board components, and welded steel stock for frame repairs. When a Conley customer needs a part we don’t have on hand, our Atlanta office coordinates fast delivery, usually same day or next morning. The person who shows up will know the gate, the brand, and the failure mode before they start.
Common Gate Parts & Welding Problems We See in Conley Homes
- Slide-gate operator bolts working loose. Constant vibration from truck traffic on Moreland Avenue and Forest Parkway shakes anchor bolts free faster here than anywhere in the surrounding suburbs. We re-torque those bolts and check concrete footings for micro-cracking on every commercial call.
- Red-clay heave tilting hinge posts. Conley’s residential pockets sit on Georgia red clay. It swells when it’s wet and shrinks when it’s dry. Over decades, that cycle heaves and tilts gate posts out of plumb, which misaligns latch and lock strike plates even when the panel itself is fine.
- Humidity and heat soak degrading rollers and circuit boards. Summer in Conley means 90°F-plus heat and heavy dew. Unshaded steel gates rust faster, nylon rollers get brittle, and operator boards inside unvented enclosures cook. We replace failed parts and make sure the new ones can breathe.
- Ice-storm torque on steel frames. The winter events of 2014 and February 2021 froze operators solid and twisted gate arms out of alignment overnight. Steel frames can hold that twist after the thaw, which is why a gate that worked fine in December might bind in February with no obvious cause.
Pricing for Gate Parts & Welding in Conley, GA
Most hinge replacement work in Conley runs $180 to $340 per hinge set, depending on the weight of the gate and the condition of the post. Post replacement runs $350 to $750 per post, which includes cutting out the old footing, setting new concrete below the clay line, and re-hanging the gate. Rail repair typically lands between $200 and $500, and custom welding jobs run $150 to $600 depending on how much steel has to be cut out and replaced. Heavy commercial slide-gate work on the industrial corridor, where we’re re-torquing anchors and inspecting footings as part of the repair, often falls between $500 and $1,400.
The price is quoted and agreed before any work starts. You’ll also get the $40-off-any-repair-over-$200 standing offer, no trip charge inside the county, and a free second opinion on any written estimate you’ve gotten from another shop. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Conley
We work throughout the south metro every week. If you’re just up the road in Hapeville or Forest Park, over in Gresham Park, or down toward Morrow, the same crew and the same pricing apply. Conley is our focus on this page, but our Gate Parts & Welding in Conley coverage extends to every neighboring community with the same live-answer phone line and the same 90-day promise.
Serving Conley, GA - Our Local Coverage Area
We’re based in the Conley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Conley
Heavy truck traffic on Moreland Avenue and Forest Parkway sends low-frequency vibration straight through the concrete pad and into the operator’s anchor bolts, and over months that vibration walks the bolts out of the concrete. The fix is re-torquing the bolts to spec and checking the footings for micro-cracking, which is a standard part of every commercial gate call we do in 30288. Call (877) 610-2993 and we’ll inspect yours for free.
Georgia red clay swells when saturated and shrinks during drought, and that cycle gradually heaves or tilts gate posts out of plumb over the decades. Once the post moves, the hinge geometry changes, the panel binds, and the latch won’t line up. We set new post footings below the clay line to get out of the active shrink-swell zone, then weld and re-hang the gate. Call (877) 610-2993 to get a look at your post before it gets worse.
Yes. Most rack and pinion repairs on Conley slide gates can be done with the gate in place and the entrance kept operational, at least partially, while we work. We plan the work around your truck schedule, and because we weld on site, we don’t have to haul the gate off to a shop. Call (877) 610-2993 and we’ll coordinate the timing with you.
Almost always the hinge post is the problem, not the panel. A gate sags because the post it hangs from has moved or the hinges have worn, not because the steel got tired. We check the post for plumb and the hinges for wear first, then decide whether the panel needs any straightening. If the post is solid, we replace the hinges and re-hang. If the post has heaved, we replace the post. Call (877) 610-2993 and we’ll tell you which one it is before quoting anything.
Any time we replace parts on an automatic gate in Conley, we bring the gate into compliance with current UL 325 entrapment-protection standards, which means verifying or installing photo eyes, contact edges, and proper force settings for the operator. This is not an add-on; it’s part of doing the job right and it’s covered in our upfront quote. Call (877) 610-2993 if your gate needs parts and you want it done to code.
If your Conley gate needs parts, welding, or a straight answer about what’s actually wrong, call (877) 610-2993. A live person picks up. We’ll give you a free estimate, show you the price before we start, and stand behind the work for 90 days. That’s how we’ve done it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conley since 2001.