Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Colton
When a gate post works loose or a weld cracks in Colton, you need someone who knows this city, not a callback number in another state. Gatewood Fence & Gate fixes gate parts in driveways and warehouse yards across Colton’s 92324 zip code, with on-site welding that keeps your gate where it is instead of hauling it to a shop. Hal Gatewood has run this company since 2001, and the name is on every invoice. Call (877) 610-2993 and a live person answers, any hour.
We work on gates hung before modern safety standards existed, and we know the specific ways Colton tears them up. The Gate Parts & Welding work we do here leans heavily on post replacement, hinge repair, and structural welding because of what this city throws at a gate. Wind off the Cajon Pass. Vibration from the railyard. Heat that bakes metal past 105 degrees. If your gate has been sagging or dragging, the cause is usually in the footing or the hinge post, not the panel itself.
We serve all of Colton, from the older neighborhoods off La Cadena Drive to the industrial yards near the freight corridor.
Why Gatewood Fence & Gate Is Colton’s Preferred Gate Parts & Welding Company
Colton homeowners have been burned by outfits that quote one price over the phone and show up with a different number on the clipboard. That is not how we work. The price is quoted and agreed before any work starts, in writing. Hal has been at this since 2001, and his shop carries a published address and license number anyone can look up. When a Colton customer calls, they talk to a person who knows the difference between a hinge issue and a footing problem without having to send photos to an office in another time zone.
Every job we complete carries the 90-Day Done Right Promise. If it is not done right, we make it right, and that promise is stamped on the invoice, not hidden in fine print. Colton customers also get a free second opinion on any written estimate they have received from another company, and there is no trip charge for anyone inside the county. We service FAAC, BFT, Linear, and Viking operators, among others, and we keep common parts for these brands ready to go rather than ordering everything out.
Being locally owned and owner-operated means the person who shows up to your gate is accountable to his own name. Hal will hand you his cell number and mean it. That is the oldest kind of accountability there is.
Our Gate Parts & Welding Services in Colton
Hinge Replacement
In Colton’s older housing stock, hinge pins shear under Santa Ana wind loads that concentrate through the Cajon Pass corridor. A gate that slams or twists in a wind event transfers all that force to the hinge point. We cut out the old weld, align the gate, and weld in new heavy-gauge hinges rated for sustained wind and daily use. Where the original hinge was bolted into a cracked post, we address the post at the same time, because a new hinge on a failing post is money thrown away.
Post Replacement
Post failure is the most common gate repair we see in Colton, and the cause is frequently not what people expect. Properties west of downtown and near La Cadena Drive sit close enough to the BNSF San Bernardino Intermodal railyard that low-frequency vibration works post anchors loose inside their concrete sleeves over years. The gate sags and drags even though the hinge hardware is still intact. That is a footing job, not an adjustment job. We core out the cracked concrete, set a new footing with deeper embedment, and re-hang the gate so it swings level.
Rail Repair
On wrought iron swing gates from the 1940s through the 1970s, the top rail takes the brunt of thermal cycling. Colton summers push past 105 degrees, and the metal expands and contracts against the weld beads at the top rail to stile connection. We routinely grind out fatigued or cracked weld beads and re-weld the rail connection with proper penetration, then add a reinforcement plate where the design allows it. On newer steel tube gates we replace bent or rusted rails outright.
Custom Welding
Some Colton gates cannot be bought off a shelf. A driveway with odd setbacks, a commercial slide gate at a freight yard, or an older gate with custom scrollwork needs welding that matches what is already there. Hal welds on site, in your driveway or at your warehouse entrance, so the gate never leaves the property. We fabricate reinforcement plates, rebuild sagging panels, weld new latch plates, and repair sections that have rusted through at the bottom rail. If you are on the fence about whether a welded repair will hold or whether the gate needs replacement, call us and we will tell you straight. Getting it wrong on purpose is not how you keep customers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colton
We service and repair operators from FAAC, BFT, Linear, and Viking, along with a wider list we have been certified on since we opened. Colton’s mix of residential swing gates and commercial slide gates means we carry a deeper parts bench than most shops. When a control board fails on a legacy Linear operator in a Colton backyard, we can usually source and install the replacement quickly rather than telling you to wait for a freight shipment. If the board is obsolete, we will tell you honestly and walk through the retrofit options.
Common Gate Parts & Welding Problems We See in Colton Homes
- Railyard vibration loosens post footings. Gates near the BNSF intermodal railyard sag and drag even when the hinges are fine. The repair is re-setting or replacing the footing, not shimming the hinge.
- Santa Ana wind events rack older swing gates. Wind funneling through the Cajon Pass corridor shears hinge pins and tears the weld at the top rail. We reinforce that connection and use hinges sized for wind load, not just gate weight.
- Heat and hard groundwater accelerate rust. Colton’s high-mineral water and 105-plus degree summers oxidize iron hardware years faster than manufacturer ratings predict. We replace corroded hinge pins, brackets, and bottom rails before they fail completely.
- Obsolete control boards fail in the heat. Legacy operators in Colton’s older homes run original boards that overheat and fail intermittently when the gate track binds from thermal expansion. We diagnose whether the board, the track, or both are the issue.
Pricing for Gate Parts & Welding in Colton, CA
Here is what you can expect to pay for gate parts and welding work in Colton’s market. A basic hinge replacement on a residential swing gate typically runs $180 to $340, including the new hinges and on-site welding. Replacing a single gate post with a new concrete footing runs $450 to $850 depending on the size of the post and whether we need to core out old concrete. Rail repair is usually $150 to $400 per rail, and custom welding projects start around $120 for small repairs and run up from there for structural work. These are Colton prices, not generic Inland Empire averages. We quote the job before we start, and the number does not change at the door.
Remember that Gatewood Fence & Gate takes $40 off any repair over $200, offers no trip charge inside the county, and gives a permanent 10% discount to seniors and veterans. Call (877) 610-2993 for a free estimate on your gate.
We Also Serve Cities Near Colton
Our crews serve Colton and the surrounding communities of Grand Terrace, Loma Linda, Rubidoux, and San Bernardino. If your gate sits a few miles outside Colton’s city limits, we are still close by, and the same 90-Day Done Right Promise applies. The person who answers the phone knows the area and will tell you straight whether we cover your street.
Serving Colton, CA - Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Colton
Because the hinge hardware is probably not the problem. In neighborhoods close to the BNSF San Bernardino Intermodal railyard, low-frequency vibration from passing trains works post anchors loose inside their concrete sleeves over time. The post shifts, the gate drops, and no amount of hinge shimming will hold it level. The permanent fix is to re-set or replace the footing with deeper embedment. Call (877) 610-2993 and we will check the post before we touch the hinge.
It depends on the operator, but many legacy FAAC, BFT, and Linear swing gate openers can accept a retrofit with current UL 325 compliant photo eyes and edge sensors if the control board has the necessary inputs. Some older boards do not, and in those cases we will tell you that replacing the operator is the cheaper and safer path than buying a board twice. We do not guess on safety equipment, and we do not leave an operator running without the entrapment protection the law requires.
Sometimes it is, but often the weld cracked because the gate design is undersized for the wind load Colton sees. We will grind out the old weld, re-weld the connection with proper penetration, and assess whether the panel needs a reinforcement plate at that joint. If the crack happened once under typical Cajon Pass winds, a straight re-weld without reinforcement tends to crack again. Call (877) 610-2993 for an exact quote, and we will tell you what we would do on our own gate.
You will hear it before you see it. Worn rollers grind and chatter as the gate travels, and the gate starts dragging or binding partway through its travel. In Colton’s freight yards and warehouse entrances, dust from truck traffic accelerates roller wear, so we inspect rollers on every commercial gate we service. If the rollers are worn flat, we replace them and check the track for damage at the same time. Replacing rollers without checking the track is half a repair.
No. If the post itself is still structurally sound and the steel has not rusted through at the base, we can sometimes re-set the existing post in a new concrete footing and weld a reinforcement plate at the base. That preserves original ironwork, which matters on Colton’s older homes. If the post is cracked, corroded, or bent, replacement is the cheaper long-term answer. We will show you the difference on site before any work begins.
Call Gatewood Fence & Gate for Gate Parts & Welding in Colton
If your gate is sagging, dragging, cracked, or just not closing right, call (877) 610-2993. We service Colton with on-site welding, honest pricing, and work that carries a written 90-Day Done Right Promise. Hal Gatewood has been fixing gates since 2001, and the name is on the shop and on every invoice. If you want a second opinion on a written estimate from another company, we will come look at it for free. No trip charge inside the county. A live person answers the phone every time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colton and the Inland Empire since 2001.