Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Clinton Township
Most gate failures in Clinton Township start the same way: a hinge post that frost-heaved out of plumb, a bottom roller that salt fused to its track, or a weld that finally let go after twenty Michigan winters. We fix all three the same day we show up. If you’re dealing with a gate that drags, won’t latch, or jammed halfway open on a shared driveway off Moravian or Garfield, call (877) 610-2993. Hal Gatewood has been working gates since 2001, and the crew that shows up in Clinton Township is the same crew that does the welding in your driveway, not a subcontractor passing through.
Why Gatewood Fence & Gate Is Clinton Township’s Preferred Gate Parts & Welding Company
Clinton Township homeowners call us because we repair before we replace. A national outfit will quote you a whole new gate when the real problem is a hinge post that moved an inch. We reset the post, weld new hardware where the old stuff cracked, and you keep the gate you already paid for. Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no “that’s normal wear.”
Our Gate Parts & Welding work in Clinton Township has built a reputation around showing up in the window we promised. A live person answers every call, 24/7. When a gate goes down at 9 p.m. and it’s the only way cars get in and out, you don’t want a voicemail. You get Hal’s number and you get an answer.
We know the difference between a 1958 ranch gate on a shared drive in 48036 and a 2002 ornamental slide gate off M-59 in 48038. That local knowledge matters. It changes which parts we stock, how we dig post holes in a tight right of way, and how fast we can finish without blocking your driveway or your neighbor’s. Clinton Township is home to every kind of gate problem we see, and we’ve seen most of them more than once.
Our Gate Parts & Welding Services in Clinton Township
Hinge Replacement
In Clinton Township’s freeze-thaw belt, hinge posts move every spring. The gate drags, the latch misses, and homeowners call us thinking the panel is bent. It usually isn’t. The hinge has sagged because the post behind it shifted. We cut out the old hinge, weld in a new one sized to the corrected post position, and the gate swings clean again. Most hinge replacements in Clinton Township run $180-$340 depending on the gate weight and whether the post needs shimming or a full reset.
Post Replacement
This is the biggest repair we do in Clinton Township, particularly in the 48035 and 48036 subdivisions where original chain-link swing gates sit on posts set 40 to 60 years ago. Frost cycling pushes those posts up and out of plumb a little more each winter. By spring the gate won’t latch. We dig the old post, pour a new footing that goes below the frost line, set the post true, and weld the gate hardware back on. You’re not fixing the panel without the post. A post replacement here typically runs $450-$850 including concrete and hardware.
Rail Repair
Cracked slide gate rails are common on the larger lots in 48038 where automated slide gates run along driveways. Salt accelerates corrosion at the welds, and a rail that cracks mid-span jams the gate every time it cycles. We weld the crack in place, gusset it if the metal is thin, and realign the gate on its rollers. Rail repair in Clinton Township usually runs $220-$480 depending on the length of the crack and whether the gate needs to come off the track.
Custom Welding
Sometimes the part your gate needs doesn’t exist anymore. A 1998 DoorKing bracket, a Viking hinge plate with a weird offset, a Ghost Controls mounting tab that snapped. We weld replacement pieces on site, matched to the existing metal and the existing gate. Custom welding in Clinton Township starts around $150 and goes up based on the complexity of the piece and the working space. On tight shared driveways, welding in place is usually faster and cheaper than hauling a gate to a shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clinton Township
We service and stock parts for the gate operators and hardware Clinton Township homeowners actually have. That includes DoorKing slide gate operators common on 1990s and 2000s subdivisions in 48038, Elite swing and slide operators on newer estate gates, Ghost Controls kits on lighter residential gates, and Viking operators on commercial and larger residential gates. We carry common hinges, rollers, and brackets for these brands in our trucks, which means most Clinton Township repairs don’t wait on a parts shipment.
Common Gate Parts & Welding Problems We See in Clinton Township Homes
- Hinge post heave: Repeated frost cycles push gate posts out of plumb every spring, leaving swing gates dragging or unable to latch. This is the number one call we get from south Clinton Township subdivisions built in the 1950s through 1970s.
- Salt-welded hardware: Macomb County road salt corrodes slide gate bottom rollers and rack and pinion teeth until the gate jams mid-travel. Driveways near M-59 and Hall Road see the worst of it.
- Shared driveway pinch points: In 48035 and 48036, original swing gates on shared drives fail at the hinge post, blocking both neighbors until the post is replaced and the sag corrected. We work around the right of way so both houses keep access.
- Cracked underground conduit on automated gates: In 48038, gates installed in the 1990s and 2000s are failing because frost movement cracked the underground wiring conduit and moisture got into the control boards. This is a concentrated replacement cycle happening right now in neighborhoods north of 16 Mile.
Pricing for Gate Parts & Welding in Clinton Township, MI
Here’s what Clinton Township homeowners can expect to pay for common repairs. Hinge replacement: $180-$340. Single post replacement with new concrete: $450-$850. Slide gate rail repair: $220-$480. Custom welding: $150 and up. Bottom roller replacement on a slide gate: $120-$260. These are the ranges we quote most often in Clinton Township, and the price is agreed before any work starts. Not an estimate that grows at the door. You’ll know the number, and the number won’t change unless you ask for extra work. Every job also carries the 90-Day Done Right Promise. Call (877) 610-2993 for a free quote.
We also run standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Clinton Township
Our Gate Parts & Welding in Clinton Township service area also covers Mount Clemens, Fraser, Sterling Heights, and Roseville. Same crew, same 90-Day Done Right Promise, same live person on the phone at (877) 610-2993. If you’re just outside the township line, give us a call and we’ll get you scheduled.
Serving Clinton Township, MI - Our Local Coverage Area
We’re based in the Clinton Township area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Clinton Township
Because the panel was never the problem. Clinton Township’s freeze-thaw cycles heave gate posts out of plumb every winter, and a straightened panel on a leaning post will sag again before summer. The fix is resetting the post below the frost line and welding new hinges to match the corrected position. Call (877) 610-2993 if your gate is dragging on the grass again this spring.
Yes. We weld rails in place on most Clinton Township driveways without pulling the gate or closing the drive. On a tight shared driveway off Moravian Drive, our crew rebuilt a rusted swing gate where the hinge post had heaved 1.5 inches out of plumb from winter frost. We reset the post in a new concrete footing, welded new steel hinges to match the original chain-link frame, and had the gate swinging clean by the same afternoon so both neighbors could keep using the right of way.
That generation of operator has underground wiring conduit that frost movement eventually cracked, and the resulting moisture intrusion is what kills the control board. It’s not your maintenance. The same failure pattern shows up across Clinton Township’s 48038 subdivisions because they all went through the same twenty years of freeze-thaw cycles. We can tell you whether a board replacement or a full operator swap makes more sense. Call (877) 610-2993 for an assessment.
Usually, yes. On most residential slide gates in Clinton Township we can jack the gate enough to swap corroded bottom rollers without removing the gate from its track. This keeps your driveway open during the work and cuts the labor cost. We’ll quote the roller replacement before we start, and the number won’t change. Call (877) 610-2993 and we’ll take a look.
It depends on what failed. You may just need a control board or a receiver board, not a whole new operator. If the underground wiring conduit cracked and moisture reached the board, the board is usually the first casualty. We’ll test the components and tell you what needs replacing before you spend money on a new operator. Call (877) 610-2993 for a free second opinion if someone else already quoted you a full replacement.
Call Gatewood Fence & Gate for Gate Parts & Welding in Clinton Township
If your gate is sagging, jammed, or rusted through at the hinges, call (877) 610-2993. Hal Gatewood has been at this since 2001, the shop is down the road, and the name is on every invoice. You’ll get a live person on the phone, a written price before work starts, and a 90-Day Done Right Promise on every job we do in Clinton Township. Call today and get it fixed right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Clinton Township since 2001.