Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Claremont
Gate parts and welding in Claremont usually means one of three things: a post that’s leaning, a hinge that’s torn loose, or an older gate worth saving that somebody else said couldn’t be fixed. We handle all of it. Gatewood Fence & Gate has been owner-operated since 2001, and when you call (877) 610-2993, a live person answers. We send our own crew to Claremont, and we weld on site in your driveway, not in some shop across the county. If you’ve got a sagging gate east of Indian Hill Boulevard or a wind-beaten aluminum panel in North Claremont, we’ll give you an honest read on whether to fix or replace before you spend a dime.
Why Gatewood Fence & Gate Is Claremont’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That matters in a town like Claremont, where people still run into each other at Wolfe’s Market or the Village farmers market. We don’t hide behind a call center. We answer the phone around the clock with a real person, and we show up in the window we promised. The 90-Day Done Right Promise is stamped in writing on every job: if it’s not done right, we come back and make it right. No runaround.
Claremont customers call us for the same reason they keep taking their old Volvo to the same mechanic: they want someone who remembers the house and the gate. We service nine major brands including Gate Parts & Welding components from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And because our scheduling comes through our Los Angeles office while our crews work locally, you get the same live answer at 2 a.m. that you’d get at noon. Dispatch and support are coordinated from Los Angeles; the person who shows up at your gate knows Claremont streets.
Our Gate Parts & Welding Services in Claremont
Hinge Replacement
Old hinges on Claremont gates take abuse from two directions: gravity pulling on a heavy ornamental iron panel, and Santa Ana winds shoving it sideways. We see plenty of 1920s and 1930s hinges in the bungalow neighborhoods south of Foothill Boulevard that are worn egg-shaped but still salvageable with the right weld repair. When replacement is the better call, we carry heavy-duty ball-bearing hinges that match the original look. You get a gate that swings smoothly and closes without dragging on the latch post.
Post Replacement
This is the biggest gate repair item in Claremont, and it’s almost always the roots. Decades-old sycamores and elms along residential streets send roots straight into gate post footings, cracking the concrete and tilting the post inward. We dig the old post out, prune the root if needed, and pour a wider, deeper footing before setting a new steel or ornamental post. If you’re in the tree-lined blocks east of Indian Hill Boulevard, you’ve probably seen a neighbor’s gate leaning even though the panel itself looks fine. That’s a footing problem, not a panel problem.
Rail Repair
On taller or longer gates, the horizontal rails carry most of the load. Once a weld cracks at the rail-to-stile joint, the whole panel starts flexing and eventually racks out of square. In North Claremont, where driveway gates run wider and Santa Ana gusts hit hard through Cajon Pass, we see rail fatigue on steel pipe gates and hairline cracks on aluminum frames. We cut out the cracked section, weld in new stock, and reinforce the joint so it doesn’t fail again at the same spot.
Custom Welding
Many homes around the Village still have original ornamental iron gates with scrollwork and latches you can’t buy off a shelf anywhere. We weld on site, which means your gate never leaves your driveway. Whether it’s a broken finial, a torn hinge tab, or a custom bracket for a new operator arm, we match the metal, match the finish, and keep the gate’s character intact. For gates built before modern safety photocells existed, we can often retrofit the operator and add the sensors while retaining the original ironwork.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Claremont
We service and stock parts for FAAC, BFT, Linear, and Viking operators, along with five other major brands. What that means for Claremont homeowners is simple: when your swing gate operator from the early 2000s quits, we can usually source a replacement control board or actuator without telling you to rip out the whole system. Some older LiftMaster boards are truly obsolete and no longer manufactured, but before we recommend replacement, we check compatibility and look for retrofit options. We’d rather fix what’s there than sell you something new you didn’t need.
Common Gate Parts & Welding Problems We See in Claremont Homes
- Root-heaved post footings. The city’s dense tree canopy is a point of pride in Claremont, but mature sycamore and elm roots don’t respect property lines. They crack footings, tilt hinge posts, and throw swing gates off level. The fix almost always requires full post extraction and a deeper re-pour, not just shims.
- Wind-stressed weld points on aluminum gates. Santa Ana events whip through Cajon Pass and hit the base of the San Gabriels hard. Aluminum panel gates on North Claremont estates flex under those gusts, and weld joints eventually fatigue. You’ll see hairline cracks along the top rail first.
- Legacy operators with dead control boards. Plenty of Claremont homes still run FAAC, BFT, or Linear operators installed 15 to 20 years ago. The motors may still work, but the control boards get twitchy or fail outright. We can often source new boards or match a modern retrofit to the existing gate.
- Worn rollers and latch hardware on sliding gates. Longer driveway gates in the estate neighborhoods of North Claremont ride on rollers that wear unevenly once dust and dry heat work into the bearings. A gate that used to slide smoothly now jerks and grinds. We replace rollers, clean and re-align the track, and replace latch hardware in the same visit.
Pricing for Gate Parts & Welding in Claremont, CA
A typical hinge replacement on a single swing gate in Claremont runs $180-$340, including labor and standard hardware. Replacing a leaning post with full extraction and a new concrete footing runs $450-$850, depending on depth, root work, and whether we’re matching ornamental iron. Rail repair and custom welding jobs run $150-$400 for most cracked joints and broken tabs. For older operators with a dead board, a control board replacement typically runs $250-$500, assuming parts are still available. We quote the price before any work starts, and that price doesn’t change at the door. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free second opinion on any written gate repair estimate is yours for the asking.
We Also Serve Cities Near Claremont
Our crews work all over the eastern edge of Los Angeles County, including Claremont and the neighboring communities of Montclair, La Verne, Upland, and Pomona. If you’re right at the city line off Base Line Road or near the 10 freeway, you’re still local to us. Same live phone answer, same written promise.
Serving Claremont, CA - Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Claremont
Claremont’s tree canopy is the honest answer. This city deliberately maintains one of the densest urban forests in the Inland Empire, and the roots from mature sycamores, elms, and oaks grow right into post footings. In treeless flatland cities like Ontario or Pomona, a well-poured post might sit level for 30 years. In Claremont, we routinely see posts installed 8 to 12 years ago already cracked and leaning because a root found the concrete. Call (877) 610-2993 for an exact quote on post replacement; estimates are free.
Yes, and we do it often. The original wrought iron gates on Claremont’s Craftsman bungalows have scrollwork, riveted joints, and hand-forged details you can’t buy new. We weld on site to repair cracks, broken hinge tabs, and snapped finials. We match the metal thickness and match a black finish so the repair doesn’t jump out at you. The goal is a gate that looks like it survived another 90 years, not a gate that looks like it got a modern patch.
It depends on the exact model, but many early-2000s LiftMaster operators can still be repaired. We stock common replacement parts and can source boards, gears, and remotes for many older units. Some control boards are no longer manufactured, and in those cases we’ll tell you straight: a retrofit operator may be cheaper than chasing obsolete parts. Either way, you get a written price before any work starts. Call (877) 610-2993 and we’ll identify the unit and give you a real answer.
No, not usually. A leaning post does not mean a bad gate panel. If the panel is structurally sound, we extract the old post, prune the offending root, pour a wider and deeper footing, and set a new post. We then hang the existing gate and realign everything to close cleanly. Replacing the whole gate would cost more and give you a worse result. We’ll show you the difference before you spend anything.
Santa Ana gusts funnel through Cajon Pass and hit North Claremont at full strength, especially properties up against the San Gabriel foothills. Wide aluminum and steel gates act like sails. Repeated flexing under those gusts cracks rail welds and loosens hinge bolts. We inspect weld points on every North Claremont gate we touch, because hairline cracks that look cosmetic in summer become full breaks during a strong wind event. A quick fix now beats a gate blown off its hinges in October. Call (877) 610-2993 for a free estimate; we’ll come out and look.
Call Gatewood Fence & Gate for Gate Parts & Welding in Claremont
If your gate sags, drags, or won’t open, call (877) 610-2993. We’ll answer with a live person, schedule a time that works for you, and show up ready to fix it in your driveway. Hal Gatewood has been at this since 2001, and the 90-Day Done Right Promise means one call brings him back if anything isn’t right. No voicemail, no call center, no price that changes at the door. Just a local crew that’s been repairing gates in Claremont long enough to know the trees, the wind, and the difference between a gate worth saving and one that isn’t.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Claremont since 2001.