Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Citrus Park
Gate parts and welding in Citrus Park usually means one of two things: a hinge has snapped and the gate is dragging, or a post has rotted or shifted and the whole frame no longer lines up. Most jobs run $180 to $650 depending on whether we’re replacing a pair of hinges, cutting out a failed post, or welding a cracked rail back into square. Hal Gatewood has been fixing gates since 2001 and still picks up the phone himself. If you’re in Citrus Park and a gate won’t close right, call (877) 610-2993 and tell us what you’re seeing.
Why Gatewood Fence & Gate Is Citrus Park’s Preferred Gate Parts & Welding Company
We work Citrus Park neighborhoods off Gunn Highway, Sheldon Road, and Ehrlich Road every week. The work here is different from most of Hillsborough County because the 33625 ZIP is packed with master-planned subdivisions built between 1995 and 2005. Those communities share a problem: their entrance gates were all installed around the same time, and they’ve all hit their 20-to-30-year end-of-life window together.
We know what that means in practical terms. Discontinued LiftMaster and Linear control boards. Powder-coated steel posts that looked great in 1998 and are now rusting from the inside out at the base. HOA boards that need a written scope of work before they’ll approve anything. Hal and his crew understand the approval process and can give you a written estimate your board can review the same day we look at the gate.
Our Gate Parts & Welding team shows up in uniform, background-checked, and with the welding rig on the truck. We don’t haul your gate back to a shop and leave your entrance open for a week. The work gets done in your driveway or at your subdivision entrance, with the gate back in operation before we leave.
Our Gate Parts & Welding Services in Citrus Park
Hinge Replacement
Most gate hinges in Citrus Park communities were welded to the post when the subdivision was built. That was fine for 25 years. Now the weld is cracking, the hinge pin is egged out, or the whole hinge has rusted through from constant afternoon rain and humidity. We cut the old hinge off, grind the post clean, and weld a new heavy-gauge hinge in the correct alignment so the gate swings level instead of sagging into the brick column. A pair of replacement hinges on a standard steel gate in Citrus Park typically runs $180 to $340.
Post Replacement
This is the job nobody wants to think about but every older Citrus Park subdivision eventually needs. The gate post looked solid when the neighborhood went up in the late 1990s, but fire ants tunnel under the footing, water collects, and the post shifts just enough that the gate drags. We cut out the failed post, dig the footing deeper, set a new galvanized steel post in concrete, and weld the gate back to it with the hinges aligned to the original swing path. In Citrus Park, a single gate post replacement with welding and concrete work runs $450 to $900 depending on post size and whether we’re also repairing the adjacent brick column.
Rail Repair
Steel and aluminum rails crack where they carry the most weight: at the welds near the hinge side and at the joints where sections were field-welded during original construction. Citrus Park’s humidity and afternoon storm cycle means surface rust creeps into any exposed crack and weakens it further. We grind the crack back to clean metal, weld the rail with proper penetration, and add a reinforcing plate when the section is too thin to trust. Expect $200 to $450 for a typical rail reinforcement and weld repair.
Custom Welding
Some jobs don’t fit a service menu. A gate that drags on a corner because the original installer misjudged the slope. A post bracket that has to be fabricated to match a discontinued hinge pattern from 2002. A cracked operator arm that’s no longer made. We weld on site, in place, and we make the part rather than telling you to replace the whole gate. Custom welding in Citrus Park is billed by the hour plus materials, and most jobs fall between $150 and $500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Citrus Park
We service and weld parts for the operators and gates most common in Citrus Park’s HOA communities, including LiftMaster, Viking, DoorKing, Elite, and Linear. That matters because a lot of these systems were installed in phases: the front section of a subdivision might have DoorKing operators while the streets added in 2004 run Linear. We keep common replacement boards, hinges, rollers, and weld stock on the trucks so we’re not making you wait a week for a part that should have been changed out in an afternoon. For service across the broader area, see our Gate Parts & Welding in Citrus Park page.
Common Gate Parts & Welding Problems We See in Citrus Park Homes
- Fire ants inside operator housings and junction boxes. This is the Citrus Park special. Fire ants are endemic in the landscaped entry beds and irrigation strips throughout the 33625 ZIP, and they love the warm, dry interior of a gate operator cabinet. We routinely open a panel expecting a bad capacitor and find a live colony that’s chewed through the low-voltage wiring and shorted the control board. It’s not wear. It’s ants.
- Lightning-fried control boards. Hillsborough County’s June-through-September afternoon lightning season is among the most strike-dense in the country. A nearby strike sends voltage through the safety photocell circuit or the keypad wiring, and the board dies. If your subdivision gate in Citrus Park goes dead after a storm, the board is the first thing we check.
- Corroded loop detector wiring. The underground loop that tells the gate a car is waiting gets hammered by subtropical humidity and irrigation water. When the wire corrodes, the gate opens and closes at random or refuses to close at all. We find this constantly on Citrus Park entrance systems built in the late 1990s.
- Sagged hinge posts from fire-ant tunneling. The ants don’t only live in the operator box. They tunnel under post footings, the soil settles, and the post leans just enough that the gate drags the brick column or loses its photocell alignment. We see this on swing gates throughout Citrus Park subdivisions, especially the ones with landscaped entry monuments.
Pricing for Gate Parts & Welding in Citrus Park, FL
Here’s what you can expect in Citrus Park. Hinge replacement on a standard steel gate: $180 to $340. Rail crack welding: $200 to $450. Custom bracket or arm fabrication: $150 to $500. Full post replacement including excavation, new galvanized post, concrete, and re-welding: $450 to $900. Fire ant remediation inside an operator housing including wiring repair and board replacement where needed: $250 to $600. Every price is quoted in writing before we touch the gate, and that number does not change when the job is done. No trip charge inside the county. Seniors and veterans get a permanent 10% off. And if you have a written estimate from another company, bring it to us first, we’ll give you a free second opinion. Call (877) 610-2993 for a firm number.
We Also Serve Cities Near Citrus Park
Our trucks run Citrus Park and the surrounding communities regularly: Carrollwood Village, Greater Northdale, Northdale, and Westchase. If your gate is in one of those neighborhoods, same deal: on-site welding, written pricing, and a live person on the phone day or night.
Serving Citrus Park, FL - Our Local Coverage Area
We’re based in the Citrus Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Citrus Park
It’s almost always a lightning-damaged control board that wasn’t properly grounded when the system was installed 25 years ago. Afternoon storms in Citrus Park are frequent and violent, and a nearby strike sends a spike through the safety photocell or keypad wiring straight into the board. We replace the board and add proper surge protection so the next storm doesn’t put you right back where you started. Call (877) 610-2993 and we’ll come look.
Ants enter through the conduit knockouts and the small gaps around the wiring that feeds into the operator housing. Once inside, they build their colony around the transformer and chew the insulation off low-voltage wires. That causes short circuits, blown fuses, and damaged control boards. We open the panel, remove the colony, repair the wiring, and seal the entry points. Call us at (877) 610-2993 if you’re seeing ants anywhere near your gate operator.
Yes. We weld on site with the gate still hanging, and that’s usually the better way to do it. Removing a 400-pound steel gate means disconnecting the operator arm and the safety photocells, and a lot of things can get knocked out of alignment when you try to re-hang it. We weld the cracked rail or replace the hinge in place, keep the gate swinging true, and the entrance stays secure the whole time. Call (877) 610-2993 and tell us what’s sagging.
Sometimes, but more often it’s a worn rack section that was never greased, or a roller that’s seized up under the gate and dragging. On Citrus Park slide gates from the mid-2000s, we find bad rollers, hardened grease, and racks that have been hit by delivery trucks. We replace the failed roller or rack section, or fabricate a new rack segment if the original part is discontinued. Get eyes on it early: call (877) 610-2993 for a free estimate.
Almost always yes, because the entry gate in a Citrus Park master-planned community belongs to the association, not to any one homeowner. We give you a written scope of work with the exact materials and price so your board can review it at the next meeting or by email. Most boards want the gate fixed before the meeting anyway. Call (877) 610-2993 and we’ll write it up the same day.
If your Citrus Park gate is sagging, shorting out, or just won’t close, call Gatewood Fence & Gate at (877) 610-2993. Hal Gatewood has been at this since 2001, the name is on the shop, and he’ll be the one who shows up to look at your gate. You’ll get a written price before any work starts, and every job carries the 90-Day Done Right Promise. If it’s not right, we come back and make it right. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Citrus Park and the 33625 ZIP.